The shower drain can connect to the toilet drain but not the toilet trap arm. The shower connection needs to be made downstream from the toilet vent.
similarly, Can you put a toilet where a sink was?
Your toilet also needs 24-inches of space in front of it. This means that a sink can’t be installed on the opposite wall if its edge comes into that space. … This does not include the vanity or sink cabinet it sits in, meaning that from the drain out 10-inches on each side, no new fixture or wall can be placed.
on the other hand, Does toilet water and shower water go down the same drain?
The shower and toilet are connected to the sanitary sewer system. The wastewater from both can be treated at the same facility. Gray water is waste water that doesn’t contain anything.
also, When I flush my toilet water comes up in my shower? If you see used water from the toilet backing up into shower or tub drains though, that’s a sign of a clogged sewer main. Since something is blocking the wastewater, it has no other choice but to back up. Since your toilet is set higher, the water is more likely to rise out of the lower tub or shower drain.
Can toilet and shower share same vent?
A 2″ pipe can serve a toilet and a maximum 4 fixture units draining into it. (Sinks, tubs, showers all have 1.5 fixtures units each). As a general rule, you will just be able to vent 2 fixtures on a toilet wet vent. … The toilet is vented through the sink drain.
How much does it cost to change a toilet to a sink?
1. Cost of Moving Plumbing Fixtures. The cost to move a toilet or sinks can be $2,500-$3,500 per fixture. Plumbing can be a significant cost factor in a remodel when a bathroom floor plan is altered.
Is it cheaper to move a sink or toilet?
We’re talking about moving things around. Rearranging the layout of the sink, shower, or toilet (or all three) will most likely double, and in some cases triple, your plumbing costs, says Nick Schiffer, owner of NS Builders. The price comes down to two things: the expected costs and the surprise costs.
Can a toilet shower and sink share a vent?
(Sinks, tubs, showers all have 1.5 fixtures units each). As a general rule, you will just be able to vent 2 fixtures on a toilet wet vent. … The toilet drain should be 3″, the sink drain is 1.5″, the shared sink drain/toilet vent area should be 2″, and the vent going up should be 1.5″.
Should toilet drain be 3 or 4 inch?
Regardless of your plumbing code, the minimum drain size for a toilet is 3 inches. Water closet’s flushing 1.6 gallons (or less) are rated at 3 DFUs (drainage fixture units). Some older model toilets, flushing over 1.6 gallons per flush, are rated at 4 DFUs. … And drain pipes can only drain a certain number of DFUs.
How do I unclog my main sewer line?
How to clean out a main sewer line clog
- Loosen the cap on the drain pipe. …
- Allow any sewer buildup to come out of the drain. …
- Gently feed the auger cable into the main line drain. …
- Run the auger until the clog is broken up. …
- Hose out leftover debris. …
- Pull the auger cable back out of the main line drain.
How much does it cost to unclog a main sewer line?
Main Sewer Line Clog Costs
Cleaning a sewer line costs an average of $320 with a typical range between $175 and $469. Snaking or Rodding: $100-$250 or about the cost of a service call. Fixing main line clogs can run twice as much.
Should there be water in my sewer drain?
The first answer is YES: Your sewer drains should hold water in certain locations. The reason for the water in the drainage fixture is to prevent rodents and smells entering the building. … If you do however notice excessively high levels of water there could be a blocked drain causing the problem.
What happens if plumbing is not vented?
Poorly-vented drain lines will not be able to effectively move wastewater and solid waste out of your building. This could lead to problems such as overflowing drains, backed-up toilets, and similar plumbing issues.
Do shower drains need to be vented?
It’s easy to forget, but it’s a vital and required part of any plumbing fixture drain. The vent pipes remove sewer gases while allowing air into the system to help the water drain. Without a vent, your shower won’t drain correctly.
Does a toilet drain need a vent?
The toilet’s trap arm, also referred to as the fixture drain, is the pipe between the trap and the vent. This distance depends on your local plumbing code. … Keep in mind your toilet still needs a vent, but your trap arm can be as long as necessary.
Is it easier to move toilet or sink?
Due to drainage requirements, it is more complicated to move a toilet than a sink since a toilet drain is much larger than a sink drain. Another consideration is what is underneath the toilet, and therefore what you must dig up in order to move the plumbing if your bathroom sits on a concrete slab.
Where should the toilet go in a bathroom?
Tip: A standard toilet is 14 to 15 inches high from the finished floor to the top of the bowl (excluding the fold-down seat). Consider a higher measurement of 16 to 18 inches for your wall-mounted toilet if you plan on aging into your golden years.
What is the best layout for a bathroom?
Choose the statement bath layout
The best place to position the bath in this case is centrally against the focal wall – usually the wall opposite the door to the bathroom or beneath the window. If you have plenty of floor space, a bath placed in the center of the room can give the space a real sense of occasion.
How much does it cost to run plumbing for a new bathroom?
The national average range is $2,000 to $10,000 , with most homeowners paying around $5,302 to install a new toilet, sink, faucet, two-piece tub and shower system.
…
Cost to Plumb a Bathroom.
| Plumbing Cost for Bathroom Remodel | |
|---|---|
| Average range | $2,000-$10,000 |
| Minimum cost | $751 |
| Maximum cost | $15,914 |
How easy is it to move plumbing in a bathroom?
Relocating plumbing can be a time consuming and hard work. That’s why you should only do it if you have prepared beforehand and if you have confidence in the professionals you chose to do the job. But take comfort in the fact that once it’s done, you won’t have to think about it for a long time.
Do I need a vent for every drain?
The answer is yes, every drain from your kitchen sink, to toilet, shower, laundry, floor drain and more all require venting. Vents are the allowance of atmospheric pressure in drains to prevent airlock from occurring.
How close does a vent need to be to a drain?
For a 1 ½-inc pipe the vent should be 42 inches away at the most while a 2-inch pipe must have a maximum distance of 5 feet. For pipes that have a diameter of 3 inches the distance is 6 feet and for a 4-inch pipe the most it should be away from the vent is 10 feet.
How many toilets can be on a 3 inch drain?
There is one answer. The International Plumbing Code requires 5 Drainage Fixture Units in a bathroom group. It’s good for 20 DFU’s or 4 bathroom groups.
What happens if you don’t vent a toilet?
Poorly-vented drain lines will not be able to effectively move wastewater and solid waste out of your building. This could lead to problems such as overflowing drains, backed-up toilets, and similar plumbing issues.
Can a toilet drain be 3 inch?
The standard size of a toilet drain pipe is 3 inches in diameter, but the drain can be up to 4 inches in diameter. The drain pipe is usually connected to a 3-inch schedule 40 toilet drain pipe.
Don’t forget to share the post !
