The pools are items of desire for almost everyone. From the simplest to the most luxurious, be it a fiber pool, vinyl pool and even plastic, with fountains and water mirrors, there is no one who has ever dreamed of resting on a deck with a sun lounger. But, have you thought about how to clean a pool? Did you buy a house and have no idea how to restore the pool water? We have prepared a step by step to clarify all your doubts and teach you how to clean the pool once and for all, and how to be a real professional.
The water in a swimming pool can be used for a long period of time and even the most deteriorated waters can be recovered. However, the most recommended is that maintenance is done sporadically, so that the work is no longer complicated. So check out how to clean the pool below and follow the step by step!
Read too:
How to Clean a Pool: Materials for Pool Cleaning
- Broom
- Long handle sieve
- Soft brush to clean pool
- Pool Decanter
- Pool Vacuum Cleaner
- Chlorine
Step by step how to clean a pool
1. Clean the Outside Area
The first step on how to clean the pool is to start at the outdoor area. On the deck and the surroundings, for example, they accumulate dirt and waste according to the circulation of people, animals and factors such as wind and leaves. So, to start the process of how to clean the pool, the ideal is to sweep this dirt away from the pool, always from the edge, avoiding as much as possible that the dirt falls into the water. It makes it much easier to clean the pool! Use specific products to clean the material of your deck, making it more beautiful.
2. Cleaning the Filters
The second step of how to clean the pool is to clean the filter (or skimmer), a device that is on the side of the pool and is able to capture the dirt that is on the water surface, such as small insects, flowers and leaves. If the pool has this device, it is necessary to empty the dirt tank manually whenever you follow the step by step on how to clean the pool.
It is also recommended that the colander be cleaned regularly, even before doing all the pool cleaning topics.
In this step on how to clean the pool, it is also necessary to clean the motor pump pre-filter. But remember ever turn off the filtration system and close the necessary records before accessing the pre-filter!
3. Sieve the Surface
The third step in the step-by-step how to clean the pool is to use the long-hand sieve to remove the largest dirt from the water surface, such as insects, flowers, leaves and other residues visible to the eyes. The sieve net should be of a more closed weave, to catch even the smallest pieces.
4. Brushing the Coating
The fourth step on how to clean the pool is to clean the pool liner, removing the accumulation of algae and sticky residues. Brushing also prevents the formation of stains and is great for keeping tiles and tiles always beautiful and well maintained.
Brushing when cleaning the pool is also indicated for other surfaces, such as vinyl, fiber, stones and wood, as long as the brush is soft, so as not to damage or scratch the coating.
5. Pool aspiration
The aspiration phase requires patience and care when it comes to cleaning the pool. It is the most delicate phase and the one that can be called comb-cleaning in pool cleaning. After brushing the pool, there may be a need to use a pool decanter, a product that solidifies the finer dirt and takes it to the bottom, making vacuuming necessary when learning how to clean the pool.
It is important that the decanter’s instructions are followed correctly, so that cleaning is completely effective. Wait for the necessary period for decanting and then start the aspiration process to complete this step on how to clean the pool.
For the suction to work completely, only the suction valve on the device must be open. A return device must also be open, so that the water already cleaned and sucked can return when cleaning the pool. It is also important to pay attention to the manufacturer’s instructions so that the suction is completely successful when learning how to clean the pool.
In this step of how to clean the pool, the vacuuming process has to be done slowly and gradually, with delicacy, so that the dirt at the bottom does not spread again to the rest of the pool.
Gold tip: The corners of the pool are the places that accumulate the most amount of dirt. At these points, any stronger movement can cause the suction to be ruined by the scattered dirt. So don’t forget to vacuum how to clean the pool in this area.
6. Chemical water treatment
If you want to know how to clean a quality pool, chemical treatment is also important. Composed of chlorination, water PH control and alkalinity control, it is this process that will leave the pool water treated and suitable for constant use.
The chemical process consists of measuring the alkalinity and pH of the water, correcting them if necessary. Chlorine is an efficient way to clean a pool and must be specific for that purpose. Its action disinfects water, killing microorganisms that can be harmful when left untreated. Chlorine of the granular or pellet type must be diluted so as not to damage some types of coating, such as fiberglass and vinyl.
The process of how to clean a pool is not easy, but you can learn from our step by step how to do everything on your own and leave the pool area always beautiful and well cared for so you can enjoy it with friends and family,
What to do to clear the pool water?
Is the water in your pool green? So you need to learn how to clean the pool urgently to ensure that everyone plays in the clean, contaminated water. Follow this step by step above on how to clean green pool!