Electronic ignition is when the pilot light on a gas fireplace/insert/stove is only running when the fireplace is on, this means that the unit is likely to have a battery backup as well. A standing pilot is always on, always using a small amount of gas to run constantly unless the gas is physically turned off.
Table of Contents
READ ALSO
Likewise, Why am I not getting gas to my fireplace?
Check your breaker box and reset any tripped breakers you come across. Gas Valves: Make sure that your gas valve is open and in the on position to ensure the flow of gas to your fireplace. This should be located in the firebox. If you have an older model, a key in the wall or floor should be nearby.
Also, How many hours can you run a gas fireplace?
To ensure that your fireplace remains safe to use, the longest you should leave a vent-free gas fireplace on is three hours. If your gas fireplace has a vent that leads to the exterior of your home, it can be left on continuously as long as the fireplace’s glass pane remains closed.
Moreover, Should I leave my gas fireplace pilot light on?
Leaving the gas on keeps this compound moving out of the tubes. Keeping the pilot light on will also keep moisture out of the unit and in turn, help prevent corrosion. … As you can see, it’s probably best in most cases to extinguish the pilot light in your gas fireplace during the months when you don’t need heat.
How do you tell if a gas valve is on or off?
The long side of your handle is parallel to the incoming gas line, which means your gas in on and flowing. By turning the handle perpendicular to the incoming pipe, you are closing the valve and shutting off the gas. These valves make it easy to tell if they are open or closed.
What do you do when your gas fireplace won’t light?
If gas is coming out of the pilot, but it still won’t light, the spark igniter could be the problem. Alleyne says to look for and clear out any debris between the igniter and thermocouple. 4. The pilot lighting, but not staying lit, indicates that the thermocouple is worn out, Worthen says.
How do I know if my gas valve is open?
Gas shutoff valves
When the long side of the nub or handle is parallel to the incoming gas line, it’s open and the gas is flowing. When it’s turned a quarter turn, perpendicular to the incoming pipe, it’s closed.
How do I know if my fireplace is getting gas?
With an LPG tank, you will usually have a round valve that you turn counterclockwise to open and a gauge located on top of the tank so you can visually see that you have gas. The fireplace should have an inside valve to control the gas flow, usually inside the access panel at the bottom of the fireplace.
Can I leave the gas fireplace on overnight?
No, you should not leave your gas fireplace on overnight as you risk carbon monoxide poisoning. Although it’s never recommended, if your gas fireplace has been properly maintained and designed to run continuously, it may be safe to leave it on.
Is it cheaper to run furnace or gas fireplace?
Operating a furnace for one hour at 75,000 -100,000 Btu cost a homeowner $1.12 – $1.49 based on last month’s national average natural gas rate. By comparison, a natural gas fireplace running at 30,000 Btu per hour cost only 45 cents.
Can you get carbon monoxide poisoning from a gas fireplace?
Yes, gas fireplaces are one potential cause of carbon monoxide poisoning. While there are many potential sources of such exposure, including certain appliances and devices, motor vehicles and wood stoves, gas fireplaces are a common culprit.
Is it OK to leave gas fireplace on overnight?
No, you should not leave your gas fireplace on overnight as you risk carbon monoxide poisoning. Although it’s never recommended, if your gas fireplace has been properly maintained and designed to run continuously, it may be safe to leave it on.
What do you do when your gas fireplace won’t light?
If gas is coming out of the pilot, but it still won’t light, the spark igniter could be the problem. Alleyne says to look for and clear out any debris between the igniter and thermocouple. 4. The pilot lighting, but not staying lit, indicates that the thermocouple is worn out, Worthen says.
How much does it cost to keep the pilot light on a gas fireplace?
The pilot light burns significantly less fuel than a fire but it can cost $8 to $10 a month if your fireplace is fueled by natural gas. If your fireplace is fueled by propane, it could cost up to $20 a month.
How do you know if a valve is open?
When the handle of a ball valve is parallel to the valve or pipe, it’s open. When it’s perpendicular, it’s closed. This makes it easy know if a ball valve is open or closed, just by looking at it.
Can I turn my gas back on myself?
Once the valve is turned off, do not turn it back on by yourself. It must be turned on by a gas company technician. The gas company will likely perform a pressure test on the system and relight all pilot lights in the house as part of turning the gas back on.
Which way is open on a valve?
If the handle on top is parallel to the valve, it’s open. Likewise, if the handle is perpendicular to the top, the valve is closed.
How do I turn on the gas to my gas fireplace?
Igniting with a Fireplace Key
- Look over the user manual included with your fireplace. …
- Remove your fireplace’s outer cover. …
- Put a fireplace key into the device’s gas valve knob. …
- Hold a long lighter up to the burner and ignite it. …
- Turn the gas key. …
- Replace the fireplace’s outer cover immediately.
How often do you need to clean a gas fireplace?
The initial and foremost guideline of any gas fireplace system is to have it inspected every year. With professional chimney companies, you can usually have your annual chimney cleaning and gas inspection scheduled at the same time. Matter of fact, your whole system should be inspected annually, top to bottom.
How long can you leave a natural gas fireplace on?
Vent-free gas fireplace – these gas fireplaces work similarly to ovens and don’t exhaust their fumes outside of your home. That’s why they should never be left running for more than two or three hours at a time and the rooms they are in should always be well-vented themselves.
How do I know if my gas fire is leaking carbon monoxide?
Warning signs you cannot and should not ignore
- The fireplace does not light.
- Your home methane detectors sound.
- Your carbon monoxide detectors sound.
- A stench of “rotten eggs” or a “gas odor” permeates the home.
- You can hear a hissing sound near your fireplace.
What do you do when your gas fireplace won’t turn off?
- Usually there is a rocker switch that is located around your burner which, if in the “ON” position, it will override the remote. Turn the switch to “OFF.”
- There may be a wall switch that allows you to turn your burner on. Turn the switch to “OFF.”
- A slide switch on the receiver has been moved to the “ON” position.
How much does it cost to run a natural gas fireplace?
Specifications such as standing pilot versus non-standing pilot (IPI), BTU output, hours of use and fuel type will all play a factor. With that said, the average cost to run a natural gas fireplace is approximately $0.70/hour or about $60/year, while propane costs approximately $2.30/hour or $200/year.
Does a furnace or gas fireplace use more gas?
While some fireplaces may have a lower efficiency rate than a furnace, they usually use less fuel. Therefore, if gas is more expensive in your area, a fireplace may be a more cost-effective option. TemperaturePro DFW also says that a fireplace is great if you want your heat localized in one area.
Can you heat a house with a gas fireplace?
Adding a gas fireplace into an existing home can be done quickly and easily, and doesn’t have to break the bank, either. … Heat the area of the home where you spend the most time (often the great room or basement) with a gas fireplace by turning the thermostat down and the fireplace up.
