Turn off the home’s hot and cold water supply taps/valve. Remove the water inlet hoses from the washer. Ensure to have a bucket to drain the remaining water from the hoses. Check the inlet filters on the inlet valves of the washer, inspect for any mineral deposits or other debris that may be clogging them.
similarly, How do I run a diagnostic on my LG front load washer?
Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer. Keep the phone in place until the tone transmission has finished.
on the other hand, Why is my LG washing machine showing IE?
An IE error code in LG washing machines signals that the machine’s washer was not filled with water in the allotted time. This could also be possible due to a faulty water inlet valve or a problem with a drain hose among others.
also, How do I fix the error on my LG washer? How to reset the washing machine:
- Press POWER to turn the washer off.
- Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
- With the power disabled, press and hold the START/PAUSE button for 5 seconds.
- Plug the washer back in, or turn the circuit breaker back on.
How do I fix the OE error on my LG washer?
OE can be triggered by a kinked drain hose or a clogged drain pump filter.
- Check for kinked drain hose. Check behind the washer to ensure that the drain hose is not kinked or clogged. …
- Test the drain pump. …
- Do you hear the humming sound? …
- Clean drain pump filter. …
- Run tub clean cycle. …
- Request Repair.
How do I run a diagnostic on my LG TV?
- Open the settings of the TV by pressing on the gear icon on the remote.
- Highlight or move the pointer over the All Settings option and open all settings.
- Select the Channels option.
- Move the pointer or highlight Channel Tunning.
- Press the 1 key on the remote five times quickly.
How do I force drain my LG washer?
If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.
How do you fix IE error on LG top load washer?
An IE error code indicates that the washer was unable to fill with water .
…
- Turn off the home’s hot and cold water supply taps/valve.
- Remove the water inlet hoses from the washer. …
- Check the inlet filters on the inlet valves of the washer, inspect for any mineral deposits or other debris that may be clogging them.
Are there any recalls on LG washers?
Incidents/Injuries: LG has received at least 343 reports of washing machines vibrating excessively, of which at least 187 involved minor property damage. … Consumers who have observed their recalled washing machine shaking excessively should immediately stop using it.
What is OE error in LG washing machine?
The ‘OE’ error essentially means the water is not draining from the washing machine. As your washing machine cannot drain if the filter of drain pump is clogged, re gular cleaning is necessary in order to avoid laundry. residue being accumulated inside the filter.
How do I test my LG washing machine drain pump?
Test the drain pump.
- Press POWER to turn the washer ON.
- Press the SPIN SPEED key until HIGH is selected.
- Press the START/PAUSE button to start the SPIN ONLY cycle.
- Listen to hear a humming sound which indicates that the drain pump motor has started working.
How do I run a diagnostic on my LG dryer?
Press and hold the Temperature Control and Signal button simultaneously, and then press the Power button. Once the display shows In5, press the Start/Pause button. The dryer will start the test which will run for approximately 2 to 3 minutes. Do not interrupt the test cycle as this could result in the wrong result.
How do I get the hidden menu on my LG TV?
Turn on your Smart TV. Press the setup key on the remote control for about 7 seconds or until some information appears in the upper left corner. Next, press the 1,1,0,5 keys and press OK. The hidden menu will open on the left side of the screen.
How does LG Smart Diagnostics work?
The signal from your smart range is transmitted over your home wireless network and our servers analyze the signal to diagnose any issues and then relay that information to your smart phone app. To use the Wi-Fi diagnosis, open up the LG smart range app and then open the smart diagnosis feature.
How do you force a washing machine to drain?
How to Manually Drain a Top-Loading Washing Machine
- Step 1: Turn off the power and lay down towels. …
- Step 2: Locate the drain hose at the back of the washing machine. …
- Step 3: Drain the water. …
- Step 1: Turn off the power and lay down towels. …
- Step 2: Locate the drain hose. …
- Step 3: Drain the water. …
- Step 4: Scrub the filter.
Why is the water in my washing machine not draining?
There are a few possibilities why your washing machine won’t drain. … Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed.
What does U6 mean on LG washer?
U6/Ub error occurs when there the appliance’s drum is imbalanced. This occurs when the machine is loaded unevenly with the laundry. Most often this error appears during the spin cycle. The last generation of the Samsung washing machines is smart and first of all tries to balance the load in the drum itself.
Are LG washers hard to repair?
LG front-loaders are less repair-prone than Frigidaire and GE but then the LG repair service left something to be desired. Of course, the most important thing to consider is performance. … So if you buy an LG washer and it breaks, consider calling your local repair shop first.
How long does LG washer last?
The average life expectancy for washers and dryers is between 10 and 15 years. Front loaders are very efficient.
How much does it cost to repair LG washer?
The average LG washing machine repair cost will be from $225 to $300.
How do I know if my washing machine drain pump is bad?
How do I know if my washing machine water pump is bad?
- Start the washer and wait for the washer tub to fill with water. If you do not hear water or hear a motor whirring, the washer motor may be dead.
- Open the washer lid in mid-cycle.
- Wait for the washer to finish its cycle.
How do I manually drain my LG dishwasher?
How to force water drain in the LG dishwasher
- Start a dishwashing cycle.
- Let the dishwasher run for 45 seconds.
- Turn off the device.
- Then turn it on. The first 45 seconds of any cycle is drain only.
How do you know if your washing machine drain pump is broken?
Put your finger into the drain outlet and feel the impellers if the pump freely turns. One or more of them may be broken. If so, you’ll be able to feel them while you’re turning the pump flywheel with your other hand. You also may see broken pieces of plastic in the bottom of the pump housing.
Don’t forget to share the post !