How do I clear the LE error on my LG dishwasher?

-Turn off the LG Dishwasher for 30 to 45 minutes to let the motor cool down as it may have overheated. -After 30 to 45 minutes start a new wash cycle and check if the LE error code shows again. -If not, resume normal washing.

similarly, How do I troubleshoot my LG washer?

How to troubleshoot:

1. Open the stop valve to its full capacity. It may be closed or opened insufficiently.
2. Check the intake hose. …
3. The filter screen may be clogged with debris as well. …
4. The intake valve is malfunctioning. …
5. If the pressure switch is broken, you can repair your LG washing machine yourself.

on the other hand, How do I reset my LG dishwasher?

This can usually be corrected by performing the following steps:

1. Press the POWER button to turn the dishwasher off.
2. Turn the circuit breaker to the dishwasher OFF and wait 10 seconds.
3. Turn the circuit breaker to the dishwasher back ON.
4. Press the POWER button to turn the dishwasher ON, and start a new cycle.

also, How do you fix PE error on LG washer? Here’s what you need to do when your LG washing machine displays a PE error:

1. Unplug the washer for a few seconds or a minute.
2. Plug the washer back into power and restart the wash cycle. This should fix the PE error code.

What does code OE mean on LG washer?

OE error code indicates that the washer is unable to drain the water it used during the wash cycle. OE can be triggered by a kinked drain hose or a clogged drain pump filter.

Why is my LG washer not agitating?

#1 If the washer won’t agitate the drive block might be worn out or broken. The drive block connects the washer transmission to the agitator, if it’s worn out the transmission shaft will still move back and forth but the agitator will either stay still or move slightly.

How do I run a diagnostic on my LG front load washer?

Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer. Keep the phone in place until the tone transmission has finished.

Do washing machines have a reset button?

Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. … Some machines have a button you push to reset its motor. On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it.

Is there a reset button on my LG washer?

How to reset the washing machine: Press POWER to turn the washer off. Unplug the washer from the power outlet or turn the circuit breaker to the unit off. With the power disabled, press and hold the START/PAUSE button for 5 seconds.

Does a dishwasher have a reset button?

Yes, you can reset your dishwasher by pressing the Start/Reset button on the appliance and waiting a few minutes. If your dishwasher still doesn’t start, you may need to reboot the entire system by turning off power to the appliance at the house circuit breaker or fuse box.

How do I run diagnostics on my LG dishwasher?

How run the Smart Diagnosis™ feature:

1. Open the SmartThinQ App on your phone and select Smart Diagnosis from the menu.
2. Press the POWER to turn on the washer.
3. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button.

Is there a reset button on a LG washing machine?

If your LG washing machine won’t start, try doing a hard reset on the unit. To perform a reset, start by unplugging your washer. Then, press and hold the power button for 5 seconds. Do the same with the play button.

How do I fix the Sud error on my LG washer?

SUD Error Code

If too many suds are detected during spinning, the washing machine stops to help prevent leaking. Recommended solution: Do not add more than the manufacturer’s recommended amount of detergent. Reduce the amount of detergent used until there is no more sudsing.

Are there any recalls on LG washers?

Incidents/Injuries: LG has received at least 343 reports of washing machines vibrating excessively, of which at least 187 involved minor property damage. … Consumers who have observed their recalled washing machine shaking excessively should immediately stop using it.

How do I know if my washing machine drain pump is bad?

You can check by looking for a few signs that a pump is dying or already dead.

1. Start the washer and wait for the washer tub to fill with water. If you do not hear water or hear a motor whirring, the washer motor may be dead.
2. Open the washer lid in mid-cycle. …
3. Wait for the washer to finish its cycle.

How do I test my LG washing machine drain pump?

Test the drain pump.

1. Press POWER to turn the washer ON.
2. Press the SPIN SPEED key until HIGH is selected.
3. Press the START/PAUSE button to start the SPIN ONLY cycle.
4. Listen to hear a humming sound which indicates that the drain pump motor has started working.

How do I know if my washing machine pump is broken?

When the pump fails, you can hear or see the trouble: a loud rumbling inside the machine, or a failure of the water to drain out of the tub. Here’s what you can do to fix the problem: Step 1: Check the drain hoses to make sure they’re draining properly. Remove the water supply hoses from the back of the washer.

How do I reset my LG washing machine?

How to reset the washing machine:

1. Press POWER to turn the washer off.
2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
4. Plug the washer back in, or turn the circuit breaker back on.

Why won’t my washer agitate or spin?

The washer transmission might be worn out or defective. Transmissions have gears in them that can fail causing the washer to not spin or agitate. … If the motor is turning the transmission, but the washer won’t spin or agitate, consider replacing the transmission.

Are LG top load washers good?

The LG WT7300 earns the third spot in our Best Overall Washers 2021 ratings, with a score of 3.7 out of 5. It is No. 1 in our rating of the Best Top-Load Washers. A top-loading washing machine, this LG uses the newer impeller technology as opposed to a traditional stick agitator.

How do I run a diagnostic on my LG TV?

1. Open the settings of the TV by pressing on the gear icon on the remote.
2. Highlight or move the pointer over the All Settings option and open all settings.
3. Select the Channels option.
4. Move the pointer or highlight Channel Tunning.
5. Press the 1 key on the remote five times quickly.

How do I run a diagnostic on my LG dryer?

To run the Smart ThinQ feature:

1. Open the Smart ThinQ App in your phone.
2. Press the POWER to turn on the dryer.
3. Place the mouthpiece of your phone very close to the POWER button.
4. Press and hold the TEMP. …
5. Keep the phone in place until the tone transmission has finished.

Do GE washing machines have a reset button?

Some machines have a button you push to reset its motor. … To reset washing machines that use the GE Hydrowave system, start by unplugging the washer for one minute. Plug the washing machine back in and then within 30 seconds, quickly open and close the lid six times. You’ll need to do this within a 12-second period.

What are common problems with washing machines?

7 Common problems with washing machine

• Washing machine not starting. …
• Washing machine is noisy. …
• Excessive vibrations during operation. …
• Washing machine making noise when draining or not draining at all. …
• Washing machine over-filling or under-filling. …
• Washing machine not spinning. …
• Water leaking from soap drawer.

Don’t forget to share the post !