How do I find the error code on my LG refrigerator?

LG Refrigerator Error Codes

1. Open the refrigerator door.
2. Press and hold the REFRIGERATOR and ICE PLUS buttons at the same time.
3. Hold the buttons until the control panel beeps. This takes approximately fize seconds.
4. Check the temperature display panel to confirm that DEMO mode is off.

Likewise, How do I troubleshoot my LG refrigerator?

The most common LG refrigerator repairs are temperature issues. Check the settings and adjust if too low or high. Check the condenser coils for dust and debris and clean with a vacuum. Make sure the condenser and evaporator fans are free of obstructions and spin freely.

Also, How do I test my LG refrigerator?

To put your LG refrigerator in Test Mode 1, locate the “Freezer Temp” function. But keep in mind that some units have a dedicated “TEST” button. If yours is one of them, press the button for the amount of time indicated instead. Then, press the “Express Freezing” and “Colder” choices at the same time.

Moreover, Why did my LG refrigerator stop cooling?

Check the Evaporator Fan Motor

Another possible cause of your LG refrigerator not cooling is a faulty evaporator fan motor. … Remove the cover and then try to turn the fan blade around manually. If you can’t turn it the whole way around, then it is likely defective and should be replaced.

Does a refrigerator have a reset button?

Most don’t automatically reset. If the appliance has a reset button, it should just need to be held in for 30 seconds to correct the fridge. Some refrigerators, including Maytag and Amana, need to have the lock button and the reset or auto buttons held at the same time to reset the fridge.

Where is the reset button on my ice maker?

Look for the Reset Button

To access it, you must first remove the ice tray. Once you do that, you should see the bright red reset button on the bottom of the ice maker itself. To reset the ice maker, push this button in and hold it for 10 seconds.

How do I reset my freezer compressor?

4 steps to reset a refrigerator compressor

1. Unplug your refrigerator. …
2. Turn off the refrigerator and freezer from the control panel. …
3. Reset your freezer and fridge temperature settings. …
4. Wait for the refrigerator temperature to stabilize.

How do I run a diagnostic on my LG TV?

1. Open the settings of the TV by pressing on the gear icon on the remote.
2. Highlight or move the pointer over the All Settings option and open all settings.
3. Select the Channels option.
4. Move the pointer or highlight Channel Tunning.
5. Press the 1 key on the remote five times quickly.

How long does LG refrigerator last?

How long do LG refrigerators last? LG states its refrigerators should have about a 20-year lifespan.

How do I know if my LG refrigerator compressor is bad?

The best way to tell if something has gone wrong with the compressor is to pull the fridge slightly out from the wall and listen closely. If the motor is running with a slight humming sound but the temperature is above what its normal range should be, then it’s likely there could be a problem with the compressor.

Why is my refrigerator running but not cooling?

Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out. … Plug in the fridge and make sure the fan runs when the compressor is running.

How do I know if my LG refrigerator compressor is bad?

Shake the relay switch. If you hear a rattle, then it is bad. You will need to order a replacement part. If there is no rattle, then it’s likely the relay is fine but the compressor is the issue.

Do LG refrigerators have compressor problems?

Our surveys also look at refrigerator problems that arise, including compressor problems. Our 2019 survey shows that LG French-doors are an outlier for compressor problems, with 8 percent of LG French-doors in our sample having such problems, compared with 3 percent of refrigerators overall.

What is the first thing to check when a refrigerator stops working?

The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.

Can you reset a refrigerator by unplugging it?

Unplug the appliance from the wall socket for 30-45 minutes, then plug it back in. This will reset the device and in some cases it may be enough to completely fix the problem. If a hard reset did not solve the problem, measure the fluid temperature.

Why would fridge suddenly stop working?

Typical causes are: 1) the door is left open frequently, 2) the condenser coils need cleaning, 3) the door doesn’t seal against the refrigerator box, 4) the cold control is set too cold, or 5) something is blocking the flow of cold air inside the fridge.

How do I force my ice maker to cycle?

How to Force an Ice Maker to Cycle

1. Open the freezer door to remove the ice bin from below the ice maker.
2. Empty the ice from the bin. …
3. Press the ice maker toggle switch to the “On” setting if it is not already activated.
4. Pop off the front cover of the ice maker with the tip of a flat-blade screwdriver.

What causes a ice maker to stop working?

Cause: A common cause for a clog is frozen water in the line. … Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).

Why is my ice maker taking so long to make ice?

The top reasons for a slow ice maker inside of a freezer are incorrect temperature setting, too much or too little food inside, and a clogged water line or filter. If your ice maker is slow at making ice, try the solutions below. … Appliance^® are standing by to repair your ice maker.

Why is my fridge compressor not working?

If the start capacitor is defective then the compressor may not start. Check for signs of overheating or arcing and replace if necessary. If the overload, start relay and capacitor check ok, then you may have a defective compressor which should be checked by a qualified technician.

How do I use LG Smart Diagnostics?

How run the Smart Diagnosis™ feature:

1. Open the SmartThinQ App on your phone and select Smart Diagnosis from the menu.
2. Press the POWER to turn on the washer.
3. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button.

How does LG Smart Diagnostics work?

The signal from your smart range is transmitted over your home wireless network and our servers analyze the signal to diagnose any issues and then relay that information to your smart phone app. To use the Wi-Fi diagnosis, open up the LG smart range app and then open the smart diagnosis feature.

Do LG refrigerators still have compressor problems?

In our service department’s experience, LG refrigerators had a normal compressor repair rate up until late 2018/early 2019. Although today in late 2020 we are seeing a decrease overall in calls about this problem, they are still higher than normal. A recent lawsuit against LG was settled in September 2020.

Is LG fridge better than Samsung?

Collectively, their refrigerators are some of the most reliable in the market. Due to their popularity too, it is also easier to fix an LG or Samsung refrigerator. However, LG refrigerators are a little more reliable than Samsung refrigerators.

Is LG refrigerator a good brand?

LG refrigerators have received the most J.D. Power awards for kitchen appliances than any other manufacturer three years in a row. The J.D. Power 2019 Kitchen Appliance Satisfaction Study even showed that LG refrigerators were number one in reliability.