A DC code error on a Samsung washing machine indicates that the washer is unable to spin due to a load imbalance. Correcting a DC error is as simple as redistributing the weight of an existing load, removing items to reduce the overall weight in the washer, or changing suspension rods (or shock absorbers).
Likewise, How do I fix the LC error on my Samsung washing machine?
How to solve the problem?
- Ensure that the drain hose is not clogged, kinked, or installed correctly. Part of the hose (bend) should be above the filling point of the water in the tank.
- Make sure the drain filter cover is tight.
- Turn on any program without loading laundry or adding detergents.
Also, How do I get my Samsung washer to spin only?
To run a Spin Only cycle on a model that does not have this option on the cycle selector dial, perform the following:
- Power the unit on.
- Press and hold the spin key for approximately 3 seconds. A chime will sound.
- Select the spin level, if desired.
- Press the Start/Pause button.
Moreover, Why is my Samsung washer always unbalanced?
The drum is overloaded or underloaded. If you wash your laundry at a temperature of more than 60 degrees, some extra water enters the washer during the rinse cycle. This may lead to a slight imbalance. … If the bearings are worn or rusty or the shaft is bent, the vibration increases and the washer may not spin at all.
What does the Red Key mean on Samsung washing machine?
A red key usually means that the door of the washing machine is blocked.
How do I reset the error code LC on my Samsung dishwasher?
When the LC code is flashing on your Samsung dishwasher it indicates the unit’s leak sensor is detecting moisture or a water leak. If you’d like to simply clear the code it’s as simple as unplugging the power cord to the dishwater for about 15 minutes. Doing this should clear the error and reset your dishwasher.
Where is reset button on Samsung dishwasher?
Unlike their other appliances, Samsung dishwashers tend not to have a reset button or functionally.
Why is my washer not spinning all the water out of my clothes?
Drain Hose Issues
The most likely culprit for a washer that spins but still turns out soaked clothing is a drain hose problem. It could be clogged, kinked, or even positioned incorrectly if you had to remove the drain tube to make another repair already.
Can you just do a spin cycle on Samsung washer?
Note: Some models can select a Spin Only cycle by pressing and holding the Spin button for about 3 seconds until a cycle time displays. You can then toggle the desired spin setting and start the cycle as normal.
How do I reset my Samsung washing machine?
How to reset Samsung washing machine program – eco bubble models
- Step 1: Turn on the washing machine. You clearly simply need to press the power button to make it turn on.
- Step 2: Press the option button. …
- Step 3: Turn the dial to factory reset. …
- Step 4: Tap to reset.
Why does my washer always become unbalanced?
One or more of the suspension springs might be broken. The suspension springs help to absorb the movement of the washer tub. If a suspension spring breaks, the tub might become unbalanced, causing it to shake and vibrate during operation. Inspect the suspension springs to determine if any of the springs are broken.
How do you balance Samsung washer?
- 1 Tap Settings on your washing machines display.
- Tap Calibration.
- Tap Start. The washing machine door will lock and the drum will rotate clockwise and anticlockwise for several minutes. When your washing machine has finished calibrating, it will turn off automatically.
What do you do if your Samsung washer won’t drain?
More videos on YouTube
- Turn off the washer and check the level. If the washer isn’t level it may not drain correctly. …
- Inspect the drain hose. …
- Clean the pump filter (front loaders only). …
- Turn the washer back on and start a cycle.
What are the symbols on my Samsung washing machine?
An icon displays on Samsung washing machine
- Garment + The t-shirt with a + icon indicates you can pause the cycle to add more clothing. …
- Child Lock. The smiley face icon indicates Child Lock is turned on. …
- Delay Start. …
- Door Lock. …
- Time Remaining. …
- Signal Off. …
- Pure Cycle or Self Clean. …
- Extra Rinse.
Why is my Samsung washing machine flashing?
Samsung washer spin light blinking
For the most part, this is due to improper installation of the washer or failing to balance the load. For that reason, work on balancing the load size (as explained earlier) and ensure the selected type of cycle matches what you’re washing.
Why does my Samsung dishwasher keep blinking?
This means there is too much water in the dishwasher. This is often related to a drain issue. Inspect the dishwasher’s drain connection at the sink. Check the drain hose.
Why is the normal light flashing on my Samsung dishwasher?
A blinking Normal light indicates the dishwasher’s leak sensor detects moisture or there’s not enough water in the machine.
Why is my dishwasher flashing lights?
Other blinking lights or beeping sounds: These may indicate a problem with the dishwasher caused by power surges. Try pressing the “Start/Reset” pad to reset the dishwasher and wait 2 minutes.
Why will my Samsung dishwasher not start?
Your dishwasher will not begin a wash cycle if the door latch isn’t engaged. For the dishwasher to start, make sure the door is fully closed and the latch is enabled. A broken door latch can also be responsible for a Samsung dishwasher not starting. … When this happens the latch must be replaced.
Why is my spin cycle not working?
An unbalanced load of laundry is one of the most common causes of an inadequate spin cycle. Sometimes clothing can settle on one side of the drum, throwing off the motion of the washing machine. … If you suspect a distribution problem, try rearranging your clumped-up wet laundry and running the spin cycle again.
Why is my washing machine not finishing the cycle?
Some of the most common faults that will make your washer stop mid cycle include thermostat failure, problems filling up with water for the rinse cycle, or even pump problems that prevent your washer from draining. … The pump could also be to blame if your washer is failing to drain.
How do you fix a washer that won’t spin?
If the drum stops spinning mid-cycle, try stopping the machine, draining the water and rearranging the laundry. You might be using too much detergent or an inappropriate type for your appliance. In this case, your washing machine will stop the spinning cycle and try to absorb the excess foam in its drum.
How long is a wash cycle on a Samsung washer?
The length of a Self Clean cycle varies based on your model washer. Front loading Samsung washers have a 4 hour Self Clean cycle while the cycle for top-loading machines lasts 1 hour.
How long does quick wash take on Samsung washer?
Quick Wash is a 15 minute quick timed wash program in Samsung front loader washing machines. Also, you can freely select the cycles between 15 to 60 minutes for perfect fast washing with no aggressive action.
Do you add detergent to self clean Samsung washer?
To run a Self Clean cycle, make sure the washer is empty, press Self Clean, and then press Start. You don’t need to add any cleaner when running self clean. However, we do recommend using bleach if you already have an existing mold smell (see our guide for details).
