Water Level Too High
- Inspect the tube for obstructions as it may cause the dishwasher to overfill with water. Remove any gunk and run a test wash.
- If the problem still persists, check the float and switch are operating correctly and replace the float switch if required to solve your worries.
similarly, What does code E15 mean on Bosch dishwasher?
An E15 error code indicates that the safety switch has detected water in the base of the dishwasher. Your leakage protection system has activated.
on the other hand, What does error code E17 mean on Bosch dishwasher?
An E16 or E17 error code indicates an issue with water flowing into the dishwasher or the filling system. The water may not be able to enter the dishwasher. What can I do to troubleshoot my dishwasher? Check the inlet hose and make sure it isn’t kinked or damaged.
also, How do you fix an e19 error on a Bosch dishwasher? It is also called a drain valve. And if you face this error, you should start checking the elements of the Bosch dishwasher and especially pay attention to the recirculation valve. To do this, you have to remove the detail and check the loop. The heat-exchange unit is considered to be a patented technology from Bosch.
What does Error 24 mean on a Bosch dishwasher?
It means that the dishwasher is not draining properly due to the drain filter being blocked. Possible causes for the E24 error code: The drain hose could be blocked. … After fixing the problem, reset the dishwasher according to the owner’s manual.
Can I reset my Bosch dishwasher?
To reset the modern Bosch dishwasher, press and hold the start button for about 3 to 5 seconds. On some older Bosch models, the reset feature may be called “cancel” or “drain”. … Pressing the on/off button does not reset the dishwasher’s Electronic Controller for most Bosch dishwashers.
Why does my Bosch dishwasher says water tap?
Tap indicator lights up
According to the instructions for Bosch dishwashers, if the indicator just lights up, it means that: … The water tap is closed. The filter in the supply hose is clogged. Filters are clogged or blocked.
How do you reset a Bosch dishwasher?
To reset the modern Bosch dishwasher, press and hold the start button for about 3 to 5 seconds. On some older Bosch models, the reset feature may be called “cancel” or “drain”.
What does E22 mean on my Bosch dishwasher?
An E22 error code indicates that the dishwasher filter is blocked. The filter is the area where food particles get caught and it needs to be cleaned regularly. Remove the filter to make sure it is not clogged.
What is code E09 on Bosch dishwasher?
If the E09 error code appears on the appliance display it means that your heating element is defective. If your salt LED is on at the same time, please check that your dishwasher salt sensor isn’t dirty and causing your appliance to assume there’s dishwasher salt when it hasn’t been topped up.
What is E19 error in Bosch dishwasher?
If the E19 error code appears on the appliance display it means that there is a problem with the heat exchanger. We recommend that you do not try to resolve the issue on your own at home due to health and safety reasons, and that you book an engineer visit to have a professional rectify the problem.
How do I fix e25 error on my Bosch dishwasher?
Filter. The first thing to do when an e25 error occurs is to check the filter inside the dishwasher and the pump impeller. If the code appeared during the dishwashing, prepare for the fact that there may be too much water on the floor.
What is error 22 on a Bosch dishwasher?
Dishwasher Troubleshooting: E22 Bosch Dishwasher Error Code
An E22 error code indicates that the dishwasher filter is blocked. The filter is the area where food particles get caught and it needs to be cleaned regularly. Remove the filter to make sure it is not clogged.
Why is my Bosch dishwasher red light blinking?
The flashing red light on a Bosch dishwasher indicates that the door is not latched correctly, which is required to initiate the wash cycle. The door latch may not be fully engaged, or the latch sensor may be faulty.
Why does my Bosch dishwasher keep stopping?
The appliance will stop mid cycle if the door is not closed properly. Ensure that the door is shut firmly and the latch engages fully. Check if the rear panel is being pressed in, for example by a hose holder, which has not been removed. If the door does not shut properly, click here for more information.
What does cleaning display light mean on Bosch dishwasher?
The action that it is instructing you to take is to empty the dishwasher, because the contents are clean, before loading the DW with any dirty dishes.
How do I clean my Bosch dishwasher drain hose?
Pinch the clamps holding the recirculation hose to the dishwasher. Remove the recirculation hose. Take the hoses outside and run water through them with a garden hose to clear your blockage. Reconnect both hoses to the dishwasher and the sink and secure them with the wire clamp.
Why does my Bosch dishwasher say check water?
A Bosch dishwasher check water and rinse aid light flashing may indicate that the anti-flood switch has been activated. … This is often caused by a blocked drain or a faulty drain pump, and you may find water leaks under the machine.
Where is the drain filter on a Bosch dishwasher?
Cleaning a Bosch Dishwasher Filter
The dishwasher filter is located on the bottom of the dishwasher floor. Grasp the top of the filter and turn it counterclockwise.
How do I clean my Bosch dishwasher filter with vinegar?
Dishwasher Tub Cleaning
White vinegar: Pour 1 cup of white vinegar in the base of an empty dishwasher and run a heavy clean cycle. Baking soda: After running a vinegar cycle, sprinkle 1 cup of baking soda in the dishwasher’s base and allow it to sit overnight. Run a regular, empty clean cycle in the morning.
How much salt do I put in my Bosch dishwasher?
Filling the salt dispenser
Before using the appliance for the first time, pour about 1 litre of water in the salt container. Then refill with salt (not cooking salt) until the salt container is full (max. 1.5 kg). When you refill the salt, water is being displaced and drains off.
How long is Bosch washing machine warranty?
All Bosch appliances have a two year manufacturer’s warranty as standard to protect against any manufacturing and material faults and defects during this warranty period. For further information about this warranty, please read our warranty terms and conditions.
How long is Bosch dishwasher warranty?
How long is the warranty on a Bosch dishwasher? As part of your Bosch dishwasher warranty, you get a one-year limited warranty on the entire appliance, parts, and labor. In years 2–5 of ownership, you’ll receive protection for the microprocessor or printed circuit board parts only.
Don’t forget to share the post !
