Problem with the overflow contact.
Table of Contents
READ ALSO
- Disconnect power to the washer.
- Turn off both hot and cold water faucets.
- Make sure the drain hose is free from kinks and obstructions.
- Clean the drain pump filter.
- Plugin the washer.
- Try to restart the machine.
Likewise, What does F21 mean on a Maytag 3000 washer?
In this particular case, error code F21 indicates an issue with your Maytag washing machine’s drain valve. When it takes eight or more minutes for a Maytag washing machine to drain, the device will tell its pipes to close, and you’ll be forced to troubleshoot.
Also, What does code F21 mean on Kenmore washer?
The F21 error code indicates a long drain. Here are some tips that should help you resolve this problem: Check your washer drain to make sure that it is draining properly. Check the drain hose for kinks and clogs. Make sure that it is installed properly per the instructions in your owner’s manual.
Moreover, How do I clear my F21 code on Kenmore?
This may be an indication of a drain pump problem and/or clog in the drain line. Unplug your machine for 1/2 hour to see if the CCU will reset. If that is without result check the drain hose for kinks or if it is clogged. After that check the electrical connections to the pump and ensure the pump is running.
What is wrong with my Maytag washer?
Some common Maytag front-load washer problems include not agitating or spinning, and not draining or filling with water. Perhaps your washing machine is vibrating during spin cycles or making noises during wash cycles. … Look, Maytag is a great brand, but if the washer isn’t working that doesn’t work for anybody.
How do I clear the error code on my Maytag washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
What does FH mean on a Maytag washer?
FH indicates that there is a Water Inlet Problem—no or insufficient water supply. Select PAUSE/CANCEL twice to cancel the cycle. Unplug washer or disconnect power.
What does F28 mean on a Kenmore washer?
The F28 error code indicates a communication problem between the central control and the motor control. This simply means the control boards are not talking to each other. This can be a difficult and frustrating problem to diagnose even for a technician.
What does F33 mean on a Kenmore washer?
The F33 fault code indicates that the wiring connection between the pump and CCU (central control unit or main control board) is lost. This can be caused by a loose wire harness connection at the pump or the CCU. It could also be caused by a bad pump motor.
What does Sud mean on a Kenmore washer?
SUD : The Sud error code is used to indicate there are too many suds for the washer to remove. This is often caused by too much detergent being used or non HE detergent being used in an HE machine. After 4 minute the SUD will be displayed and 4 minutes later the F02 will be displayed.
How long does Sud error last?
If you have noticed a SUD code during a washing cycle, it means the suds have exceeded the drum’s usual level. More specifically, this error means that the washing machine is reducing foaming. It has just stopped for 5-10 minutes to allow the suds to dissipate and the washing cycle to go on.
Where is the reset button on Maytag washer?
How to Reset a Maytag Washer
- Press the “Power/Cancel” button.
- Push the appropriate button to choose a new cycle.
- Press “Start/Pause.” You have now reset your Maytag washer.
Is there a recall on Maytag washers?
Important: CPSC Recall Remedy Notice Due to COVID-19
Description: The recall involves white Maytag front-load washers with model number MAH9700 and a serial number from 10188468GA through 11683946GJ. The model and serial numbers are located inside the door opening and below the rubber boot.
How do I fix error code F21 on Kenmore?
This may be an indication of a drain pump problem and/or clog in the drain line. Unplug your machine for 1/2 hour to see if the CCU will reset. If that is without result check the drain hose for kinks or if it is clogged. After that check the electrical connections to the pump and ensure the pump is running.
What does F5 mean on a washer?
A temperature sensor resistance that is out of the normal range is detected by the Central Control Unit. A failed NTC temperature sensor is what causes the F5 error.
What does F5 mean on washing machine?
The F5 error code indicates that the Central Control Unit (main machine control board) detects a temperature sensor resistance that is out of the normal range.
What does the code F20 mean on a Whirlpool washer?
An F20 or FH error code indicates a water supply problem. Here are some common issues: Both hot and cold water must be connected and turned on. Water inlet hoses kinked. Water inlet valve screen clogged.
Why is my Whirlpool washer flashing HF?
The manufacturer has assigned this error or fault code to indicate that there is a problem with the amount of water entering the machine. This error code will be displayed if the machine is trying to fill with water but the flow meter doesn’t sense any flow for 30 seconds.
Why does my washer say F 28?
The F28 error code on this model of washer indicates a communication error between the motor control unit and the computer circuit unit that results in the washer stopping during a cycle.
What is F28 code?
The F28 code is displayed when your boiler fails three ignition attempts, resulting in the boiler halting operation and turning off. Vaillant officially defines the F28 error code as an ignition fault.
What does error code F28 mean?
Posted: 08/01/17. shantapanchu a F28 error code is a common problem indicating that there is a communication problem with the central control unit. Any error code can be caused by a electrical anomaly. try to reset your washer.
What does F33 code mean?
Code F33. 1 is the diagnosis code used for Major Depressive Disorder (MDD), Recurrent, Moderate. It is a mental disorder characterized by a pervasive and persistent low mood that is accompanied by low self-esteem and by a loss of interest or pleasure in normally enjoyable activities.
How do I fix error code F33?
This is most commonly caused by a failed drain pump. Check the drain pump trap and make sure it is clean and that nothing is binding the pump impeller. Check the wiring at the drain pump make sure the connection is seated properly. If all that looks and the error continues replace the drain pump.
