How do I fix error code F21 on Maytag?

Problem with the overflow contact.

1. Disconnect power to the washer.
2. Turn off both hot and cold water faucets.
3. Make sure the drain hose is free from kinks and obstructions.
4. Clean the drain pump filter.
5. Plugin the washer.
6. Try to restart the machine.

Likewise, How do you clear F21 error on Bosch washing machine?

How do I deal with error code F21 on a Bosch Classixx 6 1400

1. Turn the knob to the off position.
2. Wait 2 seconds.
3. Turn the knob to the 6 o’clock position.
4. Wait till the start light flashes.
5. Wait 2 seconds.
6. Press and hold the spin button.
7. While holding it, turn the knob to the 7 o’clock position.
8. Release the spin button.

Also, What does F21 mean on a Maytag 3000 Series?

In this particular case, error code F21 indicates an issue with your Maytag washing machine’s drain valve. When it takes eight or more minutes for a Maytag washing machine to drain, the device will tell its pipes to close, and you’ll be forced to troubleshoot.

Moreover, What does code F21 mean on Kenmore washer?

The F21 error code indicates a long drain. Here are some tips that should help you resolve this problem: Check your washer drain to make sure that it is draining properly. Check the drain hose for kinks and clogs. Make sure that it is installed properly per the instructions in your owner’s manual.

How do I clear my F21 code on Kenmore?

This may be an indication of a drain pump problem and/or clog in the drain line. Unplug your machine for 1/2 hour to see if the CCU will reset. If that is without result check the drain hose for kinks or if it is clogged. After that check the electrical connections to the pump and ensure the pump is running.

What does F21 mean on my Bosch?

F21” is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a “SUDS” error may also be displayed. This may be an indication of a drain pump problem and/or clog in the drain line.

What is the best make of washing machine to buy UK?

Best overall – Bosch serie 4 WAN28050GB: £369, Currys.co.uk. Best integrated washing machine – Indesit BIWMIL71252: £309.99, Very.co.uk. Best budget washing machine – Bush WMNB712EW: £199.99, Argos.co.uk. Best for stain removal – Hotpoint BIWMHG81484UK: £390, Ao.com.

What does FH mean on a Maytag washer?

FH indicates that there is a Water Inlet Problem—no or insufficient water supply. Select PAUSE/CANCEL twice to cancel the cycle. Unplug washer or disconnect power.

How do I clear the error code on my Maytag washer?

To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

What is wrong with my Maytag washer?

Some common Maytag front-load washer problems include not agitating or spinning, and not draining or filling with water. Perhaps your washing machine is vibrating during spin cycles or making noises during wash cycles. … Look, Maytag is a great brand, but if the washer isn’t working that doesn’t work for anybody.

What does F28 mean on a Kenmore washer?

The F28 error code indicates a communication problem between the central control and the motor control. This simply means the control boards are not talking to each other. This can be a difficult and frustrating problem to diagnose even for a technician.

What does F33 mean on a Kenmore washer?

The F33 fault code indicates that the wiring connection between the pump and CCU (central control unit or main control board) is lost. This can be caused by a loose wire harness connection at the pump or the CCU. It could also be caused by a bad pump motor.

What does Sud mean on a Kenmore washer?

SUD : The Sud error code is used to indicate there are too many suds for the washer to remove. This is often caused by too much detergent being used or non HE detergent being used in an HE machine. After 4 minute the SUD will be displayed and 4 minutes later the F02 will be displayed.

How long does Sud error last?

If you have noticed a SUD code during a washing cycle, it means the suds have exceeded the drum’s usual level. More specifically, this error means that the washing machine is reducing foaming. It has just stopped for 5-10 minutes to allow the suds to dissipate and the washing cycle to go on.

What does VarioPerfect mean?

We all dread piles of laundry. Thankfully Bosch’s VarioPerfect™ feature offers quick and eco-friendly washing for your family. (1) Put yourself in this exclusive group with a superhero washing machine feature to make your laundry less of a chore. …

What are the worst washing machines to buy?

The worst washing machines on the market today all leave a lot to be desired.
…
These are brought to you via Amazon reviews and a few YouTube videos.

1. Whirlpool WTW5000DW. …
2. Maytag MVWB835DW Bravos XL 5.3 Cu. …
3. Samsung White Top Load Washer. …
4. Samsung 4.5 Cu. …
5. LG WT7200CW 5.0 Cu.

Which washing machines should I avoid?

7 washing machine brands to avoid

• Costway.
• Deco.
• Danby.
• Electrolux.
• Speed Queen.
• Summit.
• Whirlpool.
• LG.

What is the best washing machine for 2020?

Best Washing machines

• Bosch Serie 4 WAN28201GB review: A great all-round package.
• AEG 9000 Series L9FEC966R review. 929.
• Bosch Serie 6 review: A great value washing machine. 629.
• Bosch Serie 8 WAWH8660GB review: A great all-rounder. 799.

What does the code F20 mean on a Whirlpool washer?

An F20 or FH error code indicates a water supply problem. Here are some common issues: Both hot and cold water must be connected and turned on. Water inlet hoses kinked. Water inlet valve screen clogged.

Why is my Whirlpool washer flashing HF?

The manufacturer has assigned this error or fault code to indicate that there is a problem with the amount of water entering the machine. This error code will be displayed if the machine is trying to fill with water but the flow meter doesn’t sense any flow for 30 seconds.

How do I reset my Whirlpool front load washer?

The first way you can reset whirlpool washer top load is by unplugging it for about 2 minutes then plug it back in and wait about 30 seconds before starting the washer again. This performs a hard reset on the machine and it will start over after you reconnect it again.

What does F5 mean on a washer?

A temperature sensor resistance that is out of the normal range is detected by the Central Control Unit. A failed NTC temperature sensor is what causes the F5 error.

What does F5 mean on washing machine?

The F5 error code indicates that the Central Control Unit (main machine control board) detects a temperature sensor resistance that is out of the normal range.

Why does my Maytag washer not start?

If your Maytag washing machine isn’t starting, verify that the power cord is connected to a live outlet. Test the outlet with another three-prong appliance. … Select a wash setting and pull out the knob to start the cycle. If it still won’t start, reset the circuit breaker or change out the fuses if they are blown.