If you’re still seeing the error message, try resetting your receiver:
- Unplug your receiver’s power cord from the electrical outlet.
- Wait for 15 seconds then plug it back in.
- Press the Power button on the front panel of your receiver and let it reboot.
- Refresh your service again, if necessary.
Likewise, How do I fix SWM connection loss on DIRECTV?
Unplug the Swim power inserter from the power outlet. Wait for 30 seconds. Plug the Swim power inserter back into its power outlet, and make sure it’s turned on and working. Make sure everything’s hooked up, turn your TV on and check to see if the issue has been resolved.
Also, How do I reset my DIRECTV signal?
Press the reset button
On most DIRECTV receivers, there is a small red button located inside the access card door. With others, the button is on the side of the receiver. Press the red button, then wait for your receiver to reboot.
Moreover, Why do I keep losing my satellite signal?
This issue is usually a result of the satellite dish being in a slightly wrong position, damaged or malfunctioning equipment, severe weather, or something blocking the dish’s view of the sky. Your signal strength can affect the delivery of your live programming, though with a DVR you can still access recorded content.
Why can’t I get a signal on my satellite dish?
Check all the cables between your TV equipment and satellite dish are connected securely. Try disconnecting and reconnecting the cables as this often works. While doing so, check none are damaged or wet. Unplug your receiver from the mains and leave for 10 minutes.
How do you reset a DIRECTV satellite dish?
Press the reset button
- Locate the reset button. On most DIRECTV receivers, there is a small red button located inside the access card door. With others, the button is on the side of the receiver.
- Press the red button, then wait for your receiver to reboot.
How do I connect my DIRECTV SWM?
DIRECTV specs suggest connecting the power inserter one of three ways. On SWM-enabled dishes, a single line is run to a splitter. A cable is run from the red connection on the splitter into the “Power to SWM” connection on the power inserter. Then, a cable is run from the “Signal to IRD” connection to your receiver.
Why does my DirecTV keep losing signal?
A phenomenon called “rain fade” is one common cause of DirecTV signal loss. Rain fade happens when atmospheric conditions disrupt communication between DirecTV’s broadcasting network and your home receiver. … Naturally, rain fade affects some regions of the country more than others.
How do I reconnect my DirecTV Genie Mini?
Pair the Wireless Genie Mini with your Genie HD DVR
- Press MENU on your Genie remote.
- Select Settings > Whole-Home > Manage Client > Add Clients.
- Write down the PIN you see on the screen. …
- Go back to the TV where you connected the Wireless Genie Mini.
- Use the remote to select Continue and enter the PIN when prompted.
Does a dirty satellite dish affect reception?
dirty dish may boost curb appeal, but it will likely have little impact on your signal quality. Snow and ice accumulations are another story, however, and may require more attention.
How do I get my satellite signal back?
Unplug the receiver from your electrical power outlet. Leave it unplugged for 30 seconds and plug it back in. Allow the receiver to restart and re-acquire the signal.
How do I test my satellite signal?
How to Test Satellite TV Signal Strength
- Ensure the satellite dish is connected to the included satellite receiver box. …
- Connect the satellite receiver box to your television. …
- Ensure that both the satellite receiver and television are powered on. …
- Select the “Signal Meter Screen” option from the receiver menu.
Can I adjust my directv dish myself?
Even if you didn’t install the dish yourself, realigning your satellite dish is a fairly easy process. Once you have the coordinates for your location, it’s just a matter of making minor adjustments until the signal strength is strong. Use the buttons on your receiver or the remote to access the Direct TV Menu.
Why am I getting no signal from my satellite dish?
This issue is usually a result of the satellite dish being in a slightly wrong position, damaged or malfunctioning equipment, severe weather, or something blocking the dish’s view of the sky. Your signal strength can affect the delivery of your live programming, though with a DVR you can still access recorded content.
How do I refresh my satellite receiver?
How to reset your receiver
- Unplug the power cord from the back of the receiver.
- Leave it unplugged for 30 seconds, then plug it back in.
- The receiver should boot up properly in less than 90 seconds, with lights flashing in front.
What is a SWM box on DIRECTV for?
see less The DirecTV Single Wire Multiswitch (SWM) is a specially designed piece of hardware that allows a DirecTV satellite dish signal to be split and used with many different tuners/receivers. The usual configurations allow 5, 8, 16, or 32 connections to a single satellite dish.
Can I move my DIRECTV SWM?
Yes, absolutely. Most DIRECTV installations today use the SWM system which lets you move your equipment easily. … Not every splitter will work so always get the DIRECTV-approved ones. You can replace a smaller splitter with a larger one, or run one line from a splitter into another splitter.
How do I connect my DIRECTV receiver to my satellite?
Connect your DIRECTV satellite cable to a receiver
On the back of your receiver, look for 1 or 2 ports labeled Satellite In or SAT-In. Plug the ends of the RG6 coaxial cable into the Satellite In (SAT-In) ports on the back of your receiver. If you have 2 Satellite In ports and only 1 cable, use the Satellite In 1 port.
Why is my DirecTV box blinking orange?
If you are using DirecTV Genie Mini wireless and facing a flashing orange light on it, this means your wireless video bridge is not connected with the device. To make it workable, reset the wireless video bridge, and reboot the DirecTV device. After resetting, you will have an intense blue light on your device.
Why is my genie mini not working?
Make sure the HDMI connection to the TV is secure. Check that the TV input selection. Try changing the channels. Press and hold the red reset button located near the access card to reboot the system.
Why is my DIRECTV receiver not connecting?
Unplug your receiver
Unplug your receiver’s power cord from the electrical outlet, wait 15 seconds, and plug it back in. Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.
How does the DIRECTV Genie 2 work?
A Genie 2 is a more simplified system that provides DIRECTV for up to seven rooms of TV. (That’s three more rooms than the HR54 provides.) The Genie 2 provides two 4K streams while the HR54 only allows for one. It allows wireless clients without having an external wireless adapter.
Can a satellite dish stop working?
Whilst a satellite dish will be fixed in the correct alignment when installed, if the dish shifts over time or shifts due to an external force such as extreme wind, or a falling branch, this would cause it to stop working.
Will a rusty satellite dish still work?
If for whatever reason the round part of the satellite dish is misshapen or bent or very rusty. This can cause the satellite signals to bounce off at different angles than they otherwise would and not be received by the LNB as they should be which can cause poor satellite reception.
Can I spray silicone on my satellite dish?
Extensive testing has shown that dish covers are ineffective and might cause problems with signal reception. DO NOT spray silicone, PAM or any slippery oily coating on your DIRECTV Dish. The chemicals in these substances can damage the surface.