How do I fix the error on my LG washing machine?

How to reset the washing machine:

1. Press POWER to turn the washer off.
2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
4. Plug the washer back in, or turn the circuit breaker back on.

Likewise, How do I fix the OE error on my LG washer?

OE can be triggered by a kinked drain hose or a clogged drain pump filter.

1. Check for kinked drain hose. Check behind the washer to ensure that the drain hose is not kinked or clogged. …
2. Test the drain pump. …
3. Do you hear the humming sound? …
4. Clean drain pump filter. …
5. Run tub clean cycle. …
6. Request Repair.

Also, What are the error codes of LG washing machine?

LG Washer / Dryer Error Codes and Resolutions

Error Code	Description
dE2	Door Closed But Not Locking Error
UE	Unbalance Error
DE	Drain Error
CL	Child Lock On

• 5 janv. 2019

Moreover, How do I reset my washing machine?

To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.

How do I force my LG washer to drain?

If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water. Another way you can drain the water is by turning off your washing machine and unplugging it from the outlet.

Why is my LG washing machine not draining?

Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.

How do I know if my washing machine drain pump is bad?

You can check by looking for a few signs that a pump is dying or already dead.

1. Start the washer and wait for the washer tub to fill with water. If you do not hear water or hear a motor whirring, the washer motor may be dead.
2. Open the washer lid in mid-cycle. …
3. Wait for the washer to finish its cycle.

How do I test my LG washing machine drain pump?

Test the drain pump.

1. Press POWER to turn the washer ON.
2. Press the SPIN SPEED key until HIGH is selected.
3. Press the START/PAUSE button to start the SPIN ONLY cycle.
4. Listen to hear a humming sound which indicates that the drain pump motor has started working.

Does LG washing machine have error?

LG error code dE, dE1, or dE2

If you see the message dE, dE1, or dE2, the door is not closed properly. Therefore, push the door firmly until you hear a click.

How do I run a diagnostic on my LG front load washer?

Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer. Keep the phone in place until the tone transmission has finished.

Why is my washer not starting?

You should check the outlet to make sure it’s working. Then, check if a fuse is blown or a circuit breaker thrown. If those both work, see if the Delay Start button or Control Lock feature has been activated. Sometimes it’s as simple as opening and closing the door to reset the washer.

How do I reset my LG washing machine?

How to reset the washing machine:

1. Press POWER to turn the washer off.
2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
4. Plug the washer back in, or turn the circuit breaker back on.

How do I know if my washing machine control board is bad?

A failed front-load washing machine control board has several symptoms, including the washer not starting, filling, spinning or draining.

Why is my LG dishwasher not draining?

If the valve gets stuck closed, it will prevent the water from draining. If the check valve is stuck closed, try cleaning it out and then replace it if necessary. The drain hose might be clogged. To unclog the drain hose, remove the drain hose from both the dishwasher and the sink drain and clean it out.

How do I reset my LG washer?

How to reset the washing machine:

1. Press POWER to turn the washer off.
2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
4. Plug the washer back in, or turn the circuit breaker back on.

What do you do when your washing machine won’t drain?

What to Do When Your Washing Machine Won’t Drain

1. Perform a Master Reset. Unplug your washer for about one minute. …
2. Test the Lid Switch Assembly. …
3. See if the Drain Hose is Kinked. …
4. Check the Drain Hose or Pump for Clogs. …
5. Clean out the Coin Trap. …
6. Check the Water Level Control. …
7. Schedule Washing Machine Repair.

How much does it cost to replace washer pump?

The most important part is a new washer pump. It can cost as little as $10 or as much as $75 or more. However, most homeowners pay between $25-$40 for a new pump.

How much does it cost to replace a washing machine pump?

Washing Machine Pump Repair Cost

If a pump is no longer working, it’s a relatively easy fix for a contractor and extends the lifetime of your appliance. On average, expect to spend $300 to $400 for a pump replacement job.

How long does LG washer last?

The average life expectancy for washers and dryers is between 10 and 15 years. Front loaders are very efficient.

Is there a reset button on my LG washer?

How to reset the washing machine: Press POWER to turn the washer off. Unplug the washer from the power outlet or turn the circuit breaker to the unit off. With the power disabled, press and hold the START/PAUSE button for 5 seconds.

How do I run a diagnostic on my LG TV?

1. Open the settings of the TV by pressing on the gear icon on the remote.
2. Highlight or move the pointer over the All Settings option and open all settings.
3. Select the Channels option.
4. Move the pointer or highlight Channel Tunning.
5. Press the 1 key on the remote five times quickly.

How do you reset LG dishwasher?

This can usually be corrected by performing the following steps:

1. Press the POWER button to turn the dishwasher off.
2. Turn the circuit breaker to the dishwasher OFF and wait 10 seconds.
3. Turn the circuit breaker to the dishwasher back ON.
4. Press the POWER button to turn the dishwasher ON, and start a new cycle.

Does a washing machine have a reset button?

Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. … Some machines have a button you push to reset its motor. On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it.

Is there a fuse on a washing machine?

Washing machines have fuses that protect them from power surges. Washing machines require lots of power to run. … The other fuse sits in the lid switch on some machines; if the washer overheats or there is a power surge, the washer will not run again until the fuse in the switch is replaced.