OE can be triggered by a kinked drain hose or a clogged drain pump filter.
- Check for kinked drain hose. Check behind the washer to ensure that the drain hose is not kinked or clogged. …
- Test the drain pump. …
- Do you hear the humming sound? …
- Clean drain pump filter. …
- Run tub clean cycle. …
- Request Repair.
similarly, How do I fix OE error on my LG top load washer?
Force drain the unit by starting a cycle and pausing it.
…
If you don’t have SPIN ONLY
- Power the unit ON.
- Select a cycle.
- Press START/PAUSE button to START the cycle.
- Allow a few minutes to pass so the cycle begins.
- Press the START/PAUSE button to PAUSE the cycle.
- Run an empty wash cycle to see if issue occurs again.
on the other hand, Why does my LG washer say Le?
An LE error code on the washer’s display indicates that the motor is locked, possibly due to a heavy wash load. Large and heavy sized loads will put a strain on the motor, causing the LE code to occur. Performing a reset on the washer will normally resolve this error with a reduced load size.
also, How do I know if my washing machine drain pump is bad? You can check by looking for a few signs that a pump is dying or already dead.
- Start the washer and wait for the washer tub to fill with water. If you do not hear water or hear a motor whirring, the washer motor may be dead.
- Open the washer lid in mid-cycle. …
- Wait for the washer to finish its cycle.
How do I troubleshoot my LG washer?
How to Troubleshoot LG Washer Problems
- Adjust your clothes. …
- Check the drum and drain filter for foreign objects. …
- Adjust the leveling feet at the base of your LG washer. …
- Check your hoses. …
- Check the power. …
- Contact LG customer support, if none of the previous steps help.
Why isnt my LG washer draining?
Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.
How do I test my LG washing machine drain pump?
Test the drain pump.
- Press POWER to turn the washer ON.
- Press the SPIN SPEED key until HIGH is selected.
- Press the START/PAUSE button to start the SPIN ONLY cycle.
- Listen to hear a humming sound which indicates that the drain pump motor has started working.
How do I troubleshoot my LG washer?
How to troubleshoot:
- Open the stop valve to its full capacity. It may be closed or opened insufficiently.
- Check the intake hose. …
- The filter screen may be clogged with debris as well. …
- The intake valve is malfunctioning. …
- If the pressure switch is broken, you can repair your LG washing machine yourself.
How do I fix the Sud error on my LG washer?
SUD Error Code
If too many suds are detected during spinning, the washing machine stops to help prevent leaking. Recommended solution: Do not add more than the manufacturer’s recommended amount of detergent. Reduce the amount of detergent used until there is no more sudsing.
Where is the Hall sensor on LG washer?
The hall sensor is mounted on the stator, on the back of your motor. In most cases, you can access the stator by unplugging the washer and removing the rear panel of your machine to expose the motor.
How much does it cost to replace washer pump?
The most important part is a new washer pump. It can cost as little as $10 or as much as $75 or more. However, most homeowners pay between $25-$40 for a new pump.
Are there any recalls on LG washers?
Incidents/Injuries: LG has received at least 343 reports of washing machines vibrating excessively, of which at least 187 involved minor property damage. … Consumers who have observed their recalled washing machine shaking excessively should immediately stop using it.
Why is my LG washer not filling with water?
If the water inlet valve is defective, the wash may fill slowly or not fill at all. … If the water pressure is adequate, try cleaning the screens inside the water inlet valve hose connection ports. If the washer still fills slowly, replace the water inlet valve.
Are LG washers hard to repair?
LG front-loaders are less repair-prone than Frigidaire and GE but then the LG repair service left something to be desired. Of course, the most important thing to consider is performance. … So if you buy an LG washer and it breaks, consider calling your local repair shop first.
What do you do when your washing machine won’t drain?
What to Do When Your Washing Machine Won’t Drain
- Perform a Master Reset. Unplug your washer for about one minute. …
- Test the Lid Switch Assembly. …
- See if the Drain Hose is Kinked. …
- Check the Drain Hose or Pump for Clogs. …
- Clean out the Coin Trap. …
- Check the Water Level Control. …
- Schedule Washing Machine Repair.
How long does LG washer last?
The average life expectancy for washers and dryers is between 10 and 15 years. Front loaders are very efficient.
Why does my LG washer keep saying Le?
An LE error code on the washer’s display indicates that the motor is locked, possibly due to a heavy wash load. Large and heavy sized loads will put a strain on the motor, causing the LE code to occur. Performing a reset on the washer will normally resolve this error with a reduced load size.
How do I run a diagnostic on my LG front load washer?
Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer. Keep the phone in place until the tone transmission has finished.
How do I reset my washing machine?
To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.
Where is the water level sensor on a washing machine?
The water level switch (aka pressure switch) senses the water level in the wash tub. It does this through a plastic tube which runs from the switch in the control console down to the side of the outer tub, near the bottom . The tube is filled with air.
Where is the hall sensor located?
The Hall effect sensors are located at one end of the stator, near the pole faces of the rotor.
What is a washing machine hall sensor?
The Hall Sensor, also as the rotor position sensor (RPS) is a portion of the automatic system of the washing machine. … Essentially, hall sensor keeps an eye on the washer motor to make sure it’s working properly and in the right time during your washing cycle.
Why is my LG washer not draining?
Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.
Don’t forget to share the post !
