To find your model number, take off the cover of your bath fan and look on the inside of the housing for the sticker. If you can’t find the UPC/model number and you need assistance, please contact Hampton Bay.
Table of Contents
READ ALSO
Likewise, Why is my fan remote not working?
Perhaps the most common cause for a ceiling fan remotes not working is either a lack of batteries or dead batteries. If your remote control has an indicator light, check to see if it comes on. If it doesn’t, that’s a good sign that it has a battery problem. Open the remote control battery cover.
Also, How do I find my fan model?
You will find the model number for all fans on the:
- Part guide or installation manual that came inside your ceiling fan box.
- Outside of the box.
- On the fan itself. Location depends on the type of fan: For Downrod-mount fans- ID sticker located on top of the motor housing (facing the ceiling of an installed fan).
Moreover, What is Hampton Bay customer service number?
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.
How do I resync my ceiling fan remote?
To resync your ceiling fan remote, start by turning off your fan using the wall switch and then waiting for a few seconds. Different guides will tell you to wait anywhere from 10-30 seconds while the fan is off. After waiting, turn the fan back on again.
Can you bypass ceiling fan remote?
Although some fans are operated with a remote control, you might not wish to use them in that way. Fortunately, converting remote control-operated ceiling fans to switch-operated fans is a fairly simple project for most ceiling fan models and can be accomplished by most homeowners.
What model is my Harbor Breeze fan?
The model number on a Harbor Breeze Ceiling Fan can be located on the top by the motor. It can also be found in the instruction manual and also on the ceiling fan box. The model number is usually 5 digits in length whereas the item number is 6 digits in length.
Where is the model number on a Harbor Breeze ceiling fan?
The model number can be found on the fan motor, as well as on the inside of the battery compartment cover of the included remote.
Where is the model number on Hunter ceiling fan?
Enter your model number, typically located on the top of your fan motor on a Hunter tag, and we’ll find the right documentation for you.
How do I get in touch with Hampton Bay?
Or You can contact Hampton Bay customer service at 877-527-0313 M-F 8 AM to 6 PM Eastern time and they should be able to assist you.
Is Hampton Bay a good brand?
Overall Quality was a 3.3 out of 5 and Overall Value was a 3.1 out of 5. In conclusion, Hampton Bay is probably made in China and then branded by Home Depot. It is good value for money, but you need to do your due diligence by checking the reviews and if possible checking the product in-store.
Does Home Depot own Hampton Bay?
Hampton Bay Lighting and Fans is a wholly owned subsidiary of The Home Depot. The company manufactures and sells a line of light fixtures and ceiling fans that are available online and at Home Depot stores across the United States and Canada.
How do I reset my Harbor Breeze ceiling fan remote?
To reset your Harbor Breeze ceiling fan remote you need to turn the power off then on and then push the ‘reset’ button or ‘learn’ button under the back cover of the remote. Make sure you hold the reset button down until the light comes on and the ceiling fan speed goes to medium.
What do you do if you lose your ceiling fan remote?
First would be to simply buy a new remote and set the dip switches to match the pattern on the receiver inside the fan. The new unit will now operate the fan just as the old lost one did. Second would be to remove the receiver and wire the fan directly to the house wiring so that it would operate with the pull chain.
How do I reset my Honeywell ceiling fan remote?
Tap the FAN OFF button to turn off the fan. 3. If user cannot finish the setting within the 30 seconds time frame the main power must be turned off and re-started again. This will reset the unit.
Can you get a universal remote for ceiling fan?
There are many “universal” ceiling fan remote control kits on the market for overhead fans controlled by pull chains and a singe wall switch. All of them feature on/off and fan speed control. Others also offer light-dimming and thermostatic control capabilities.
How do you turn on a Hampton Bay ceiling fan without a remote?
How to Use a Hampton Bay Fan Without a Remote Turn on the light switch connected to the ceiling fan. Pull the short cord hanging from the Hampton Bay fan once to turn the fan on high, twice to turn the fan on medium, three times to turn the fan on low and four times to turn off the fan.
Is Hampton Bay and Harbor Breeze the same company?
Hampton Bay ceiling fans are sold exclusively by Home Depot, it is their own house brand. … Harbor Breeze ceiling fans are sold exclusively by Lowes, it is their own house brand. About Hampton Bay When compared to Hunter, Hampton Bay is a much younger brand being around only since 1986.
How do you troubleshoot a Harbor Breeze ceiling fan?
- Check power to fan.
- Check reversing switch – make sure switch is not in between positions.
- Put reversing switch in either forward or reverse to check.
- If fan looks like trying to turn and a bad groan sound or smoke turn off fan and replace motor.
Are Harbor Breeze and Hampton Bay the same company?
Because Harbor Breeze and Hampton Bay are house brands, both serve the budget ceiling fan market and neither brand holds an edge on pricing.
How do you troubleshoot a Hunter ceiling fan?
- Turn the house power on. …
- Loosen the fan canopy, and check all connections. …
- Inspect the plug connection in the switch housing.
- Push motor reversing switch firmly up or down. …
- Remove any remaining shipping packaging.
- Check the blade bracket screws, and tighten if needed.
- Check the blade screws, and tighten if needed.
Where is capacitor in ceiling fan?
The capacitor is usually a black box inside the switch housing of the fan. If the case appears burnt or melted in any way, that is also the sign of a bad capacitor and it should be replaced. Keep in mind that there may be other components in the circuit with the defective capacitor.
Are Hunter ceiling fan light kits interchangeable?
For example, Hunter ceiling fan light kits are only interchangeable with Hunter ceiling fans. The “universal” means universal to their ceiling fan models only. A few brands are like this, so when shopping for universal light kits make sure they don’t specify this important detail.
Are ceiling fan blade arms universal?
No, they are not universal. It’s because ceiling fans are made by different manufacturers and thus come in different unique designs. To find the appropriate replacement, you should check on the hole patterns; they should be the same as the replacement.
Are ceiling fan light kits universal?
Some ceiling fan light kits are truly Universal – they work with most ceiling fans. Some are not. Call a professional before you buy to be sure.
