In the Settings menu, find Backup & reset, then tap Factory data reset and Reset phone. You’ll be prompted to enter your passcode and then to Erase everything. Once that is done, select the option to reboot your phone. Then, you can restore your phone’s data.
similarly, How do I reset the control panel on my Whirlpool Refrigerator?
Reset power to the product:
- Power unit down by turning off the circuit breaker(s) or unpluging the product for 5 – 10 minutes.
- Power unit up by turning on the circuit breaker(s) or plugging the product back in.
- Ensure the cooling function is turned on.
- Test the control panel functionality.
on the other hand, What causes a Whirlpool refrigerator to stop cooling?
Dirty condenser coils are the most common cause for a Whirlpool refrigerator not cooling. Condenser coils dissipate heat as the refrigerant passes through them. If the coils are clogged in dirt and debris, they can’t release the heat properly.
also, Why won’t my Whirlpool refrigerator make ice? A Whirlpool refrigerator not making ice may come down to incorrect temperature settings. For proper ice production, the freezer should be set between 0-5°F. If the temperature is too warm, ice may not adequately freeze and can appear smaller or misshapen.
Where is the reset button on a Whirlpool refrigerator ice maker?
Press the Reset Button
- At the bottom of the ice maker.
- Above the ice tray.
- Underneath the ice tray.
Does a Whirlpool refrigerator have a reset button?
Whirlpool refrigerator control panel reset is recommended if the refrigerator is beeping and not functioning properly. When the Whirlpool refrigerator reset button is not dealt with, it may cause more issues in the future.
What to check if refrigerator stops cooling?
Depending on what’s causing your fridge not to keep perishable foods cold enough, the following procedures might help.
- Make sure your fridge is getting power.
- Check the refrigerator’s thermostat.
- Test the seals on your fridge doors.
- Determine whether the refrigerator is level.
- Clean the condenser coils.
How do I fix my refrigerator that is not cooling?
Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out.
How do I force my ice maker to cycle?
How to Force an Ice Maker to Cycle
- Open the freezer door to remove the ice bin from below the ice maker.
- Empty the ice from the bin. …
- Press the ice maker toggle switch to the “On” setting if it is not already activated.
- Pop off the front cover of the ice maker with the tip of a flat-blade screwdriver.
Is there a reset button on a Whirlpool ice maker?
In most cases, to access the reset button, you will need to take the ice tray out. Once that is done, you will be able to see a bright reset button. This will mostly be located on the bottom of your ice maker. When you find this button, you will need to push it down and hold it for roughly for about 10 seconds.
Can you reset a refrigerator by unplugging it?
Unplug the appliance from the wall socket for 30-45 minutes, then plug it back in. This will reset the device and in some cases it may be enough to completely fix the problem. If a hard reset did not solve the problem, measure the fluid temperature.
Why is my refrigerator running but not cooling?
Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out. … Plug in the fridge and make sure the fan runs when the compressor is running.
What is the first thing to check when refrigerator stops working?
The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.
Why is my side by side refrigerator not cooling?
If the refrigerator is not cold enough there might be something caught in the condenser fan motor blade, or the condenser fan motor might be defective. The condenser fan motor draws air over the condenser coils to cool them. The condenser fan motor is located underneath the refrigerator near the back.
Why is my fridge not getting cold but my freezer is?
When the fridge is not cold but the freezer is, the problem is probably tied to one of your refrigerator’s mechanisms not working as designed. … A small fan and motor are mounted near the evaporator, helping draw air over the coils and circulate it to the fridge and freezer.
Why is my fridge light on but not cold?
Your refrigerator lights are on, you can hear the fan blowing air in the refrigerator, but the air is not cold. … When your refrigerator has working lights, the inner fan (or blower) inside the fridge is still blowing and the air is room temperature, then possibly the problem is the Compressor Start Relay.
What would cause a refrigerator to not be cold?
If your fan is running, but the fridge is not getting cold, a faulty compressor may be the issue. Suppose your condenser coils are clogged and thus are inhibiting the flow of the hot gas we mentioned earlier. In that case, that will significantly restrict the ability of your refrigerator to maintain a cold temperature.
What is the first thing to check when a refrigerator stops working?
The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.
How long does it take a Whirlpool refrigerator to make ice?
It will take 6 to 12 hours for the fridge-freezer’s ice maker to make ice after you have installed it. The first three batches of ice cubes should be thrown away to make sure all the ice cubes you use are made from clean water.
Why is my ice maker not working?
If your ice maker isn’t producing ice at all or is producing crescents or cubes that are smaller than usual, it’s typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it.
Does a refrigerator have a reset button?
Most don’t automatically reset. If the appliance has a reset button, it should just need to be held in for 30 seconds to correct the fridge. Some refrigerators, including Maytag and Amana, need to have the lock button and the reset or auto buttons held at the same time to reset the fridge.
How long does it take for a refrigerator to reset?
On average, refrigerators take around 12 hours to cool down. However, the cooling time ranges from 2 hours up to 24, depending on the brand.
What to check if your refrigerator stops cooling?
Depending on what’s causing your fridge not to keep perishable foods cold enough, the following procedures might help.
- Make sure your fridge is getting power.
- Check the refrigerator’s thermostat.
- Test the seals on your fridge doors.
- Determine whether the refrigerator is level.
- Clean the condenser coils.
How much does it cost to fix a refrigerator that is not cooling?
Some repairs that are generally worthwhile include cleaning a dirty coil, unclogging a drain line, or replacing a faulty thermostat. A fridge that won’t stay cold is usually suffering from a bad thermostat or a dirty coil. Both of these problems can be fixed in about an hour, and will cost about $50 to $250.
Don’t forget to share the post !