How do I reset the OE code on my LG washer?

Test the drain pump.

1. Press POWER to turn the washer ON.
2. Press the SPIN SPEED key until HIGH is selected.
3. Press the START/PAUSE button to start the SPIN ONLY cycle.
4. Listen to hear a humming sound which indicates that the drain pump motor has started working.

Likewise, Why isnt my LG washer draining?

Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.

Also, How do I fix the OE code on my LG top load washer?

Force drain the unit by starting a cycle and pausing it.
…
If you don’t have SPIN ONLY

1. Power the unit ON.
2. Select a cycle.
3. Press START/PAUSE button to START the cycle.
4. Allow a few minutes to pass so the cycle begins.
5. Press the START/PAUSE button to PAUSE the cycle.
6. Run an empty wash cycle to see if issue occurs again.

Moreover, How do I test my LG washing machine drain pump?

Test the drain pump.

1. Press POWER to turn the washer ON.
2. Press the SPIN SPEED key until HIGH is selected.
3. Press the START/PAUSE button to start the SPIN ONLY cycle.
4. Listen to hear a humming sound which indicates that the drain pump motor has started working.

How do I know if my washing machine pump is broken?

When the pump fails, you can hear or see the trouble: a loud rumbling inside the machine, or a failure of the water to drain out of the tub. Here’s what you can do to fix the problem: Step 1: Check the drain hoses to make sure they’re draining properly. Remove the water supply hoses from the back of the washer.

How do I reset my LG washer?

How to reset the washing machine:

1. Press POWER to turn the washer off.
2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
4. Plug the washer back in, or turn the circuit breaker back on.

Why is my washing still wet after spinning?

The most likely culprit for a washer that spins but still turns out soaked clothing is a drain hose problem. … Often with this issue, whatever is causing it to not drain during the spin cycle means the water isn’t draining off fast enough and is essentially flowing back into the washer drum, re-soaking your clothing.

What does IE mean on LG washing machine?

An IE error code indicates that the washer was unable to fill with water. During cold and freezing weather conditions, an IE error code could mean the water in the water supply lines are frozen.

How long does LG washer last?

The average life expectancy for washers and dryers is between 10 and 15 years. Front loaders are very efficient.

Where is the pump on LG washing machine?

The pump on an LG machine is located in the front of the washer on the bottom left near the floor. The LG front-load washer has an accessible drain filter to help keep lint and objects out of the pump.

How do you know if your washing machine drain hose is clogged?

An easy way to check that the drain hose is clear is to blow air through it. If nothing is obstructing the drain tube, the problem is most likely at the washing machine pump. If the hose is worn or badly kinked, replacing the hose may improve the ability of the machine to pump water.

How do you know if your washing machine is clogged?

How to unblock Your Washing Machine (8 Easy Steps):

1. Turn your washing machine off at the plug. …
2. Locate the pump filter. …
3. Place a bucket, towel or even a baking tray under the pump filter. …
4. Unscrew the pump filter SLOWLY. …
5. Wait for the water to finish draining. …
6. Check to see if there is a block.

How do I clear the IE code on my LG washer?

Turn off the home’s hot and cold water supply taps/valve. Remove the water inlet hoses from the washer. Ensure to have a bucket to drain the remaining water from the hoses. Check the inlet filters on the inlet valves of the washer, inspect for any mineral deposits or other debris that may be clogging them.

Why does my LG washer keep shutting off?

Common solutions for: LG Washer stops mid cycle

If the washer door is not latched shut, the door switch prevents the washer from operating. If the door lock is defective, the washer may stop mid cycle. … Inspect the door lock for damage. If the door lock is damaged or does not latch properly, replace it.

How do I reset my LG wt1101cw?

To reset this issue, the manufacturer advises to unplug the machine, press the Start-Pause button, and hold it in for 5 seconds before restoring power by plugging it into the outlet.

Why is my brand new washing machine wet inside?

Each washing machine is subjected to a functional test during the final inspection in which a washing program is simulated. As a result of this, there may be some water or moisture in the new device. There is no error. It is also not a used device.

What causes a washer not to spin dry?

When your washer will not spin dry your clothes, the debris filter or coin trap may be blocked. Your washer has a filtering device down and near the pump called a drain filter or a coin trap. This filter grabs all foreign objects that go down and into the drain.

How do I know if my washing machine pump is clogged?

Check the pump

Sometimes, it’s as simple as a lost coin blocking the pump. Behind the machine’s service hatch you’ll usually see a round access cap about the size of a biscuit – put the tray under it to catch any water, then carefully unscrew and remove it. This will reveal the pump’s impeller.

How do I know if my washer drain pump is bad?

How do I know if my washing machine water pump is bad?

1. Start the washer and wait for the washer tub to fill with water. If you do not hear water or hear a motor whirring, the washer motor may be dead.
2. Open the washer lid in mid-cycle.
3. Wait for the washer to finish its cycle.

How do you fix IE error on LG top load washer?

An IE error code indicates that the washer was unable to fill with water .
…

1. Turn off the home’s hot and cold water supply taps/valve.
2. Remove the water inlet hoses from the washer. …
3. Check the inlet filters on the inlet valves of the washer, inspect for any mineral deposits or other debris that may be clogging them.

Why is my LG washer flashing Le?

An LE error code on the washer’s display indicates that the motor is locked, possibly due to a heavy wash load. Large and heavy sized loads will put a strain on the motor, causing the LE code to occur. Performing a reset on the washer will normally resolve this error with a reduced load size.

Are there any recalls on LG washers?

Incidents/Injuries: LG has received at least 343 reports of washing machines vibrating excessively, of which at least 187 involved minor property damage. … Consumers who have observed their recalled washing machine shaking excessively should immediately stop using it.

Are LG washing machines any good?

Best Overall

Based on our extensive evaluation, LG is one of the most reliable brands of washers, as it currently holds the number-one spot in both product and service quality in the American Customer Satisfaction Index rankings.

Is it worth repairing a 15 year old washing machine?

As a general rule, if it costs less than 50% of the price of a new washing machine to repair your old one, you should choose the repair option. But, you should also consider whether or not there is a warranty coverage on your washer and think about economic realities.