10 Answers. start by trying to reset your TV. Disconnect the power cord from the outlet, then press and hold the power button on the TV (not the remote), for at least 10 seconds. Then wait a few minutes and plug the TV back in and press power once.
Table of Contents
READ ALSO
Likewise, Is there a reset button on LG plasma TV?
Just press and hold the “OK” button to reset LG tv with TV remote and TV panel as well for few seconds and then your device will start the factory reset process. … The reset LG tv will show you 4 digit password on-screen. Enter the LG service menu pin or password codes and then tap on the “OK” button.
Also, What causes a plasma TV to go black?
Loss of Power
Check the power cable that runs from the back of the TV to the electrical outlet to ensure it is securely connected on both ends. Then, press the “Power” button on both your television’s remote and the television itself to turn the TV off and back on.
Moreover, What is the lifespan of a LG plasma TV?
LG: States 100,000 hours for both plasma and LCD. Sharp LCD panels: States 100,000 hour life.
What are the signs of a plasma TV going out?
How Do I Tell If a Plasma TV Has Gone Bad?
- A vertical or horizontal line can appear and remain on the screen.
- Ghostly images or a greyish effect that appears somewhere on the screen and either disappears after a while or never goes away.
How do I reset my LG plasma TV without a remote?
To reset lg smart tv without remote -> press power button on bottom or back of your lg tv and press and hold for 20 seconds and select reset and confirm reset.
How do I hard reset my LG TV?
How do I reset my LG television to factory settings?
- Step 2: open All settings. Select the option Support and press the OK button. …
- Step 3: navigate to General. Select the General option. …
- Step 4: go to Reset to Initial Settings. Go down until you see the Reset to initial settings option. …
- Step 5: confirm the reset.
Should I repair or replace my plasma TV?
Plasma TVs can crack or scratch easily, but as long as there is no plasma dripping from the TV or any effect on the television picture, it’s safe to fix a plasma TV screen yourself.
How do you fix a plasma TV that has sound but no picture?
If Your Plasma TV Has No Picture and No Sound :
- Turn off the TV and unplug it from the wall.
- Wait 5 minutes so that the capacitors are discharged.
- Unplug the connector going into the Z-sustain and then plug the TV back in.
- Check for sound . …
- Unplug the TV and wait another 5 minutes. …
- Plug the TV back in and check for sound .
How long should a plasma television last?
Early plasma TVs have a half-life of about 30,000 hours, which means that the image loses approximately 50 percent of its brightness after 30,000 hours of watching. However, due to technology improvements made over the years, most plasma sets have a 60,000-hour lifespan, with some sets rated as high as 100,000 hours.
Are plasma TVs worth fixing?
Plasma Screen is not repairable. In my humble opinion a Plasma Screen TV is not worth the effort in finding parts to repair. They are heavy, power hungry and prone to picture burn in a way that the new extremely light weight LCDs are not. Write it off and look for a LCD replacement.
How many years do plasma TVs last?
The lifetime of the latest generation of plasma displays is estimated at 100,000 hours (11 years) of actual display time, or 27 years at 10 hours per day. This is the estimated time over which maximum picture brightness degrades to half the original value.
What’s the life expectancy of a plasma TV?
Early plasma TVs have a half-life of about 30,000 hours, which means that the image loses approximately 50 percent of its brightness after 30,000 hours of watching. However, due to technology improvements made over the years, most plasma sets have a 60,000-hour lifespan, with some sets rated as high as 100,000 hours.
How many years should a plasma TV last?
However, due to technology improvements made over the years, most plasma sets have a 60,000-hour lifespan, with some sets rated as high as 100,000 hours. If a plasma TV has a 30,000-hour rating and is on eight hours a day, its half-life would be about nine years.
How long does an LG TV last?
If an LG TV is LED, LEDs have a lifespan between 40,000 to 60,000 hours or 4.5 to 6.8 years. Let’s say it’s between 5 and 7 years, with the understanding that you aren’t watching TV for 24 hours a day.
How do I get the hidden menu on my LG TV?
Turn on your Smart TV. Press the setup key on the remote control for about 7 seconds or until some information appears in the upper left corner. Next, press the 1,1,0,5 keys and press OK. The hidden menu will open on the left side of the screen.
How do I reset my TV without a remote?
Unplug the TV’s AC power cord from the electrical socket. Simultaneously press and hold down the Power and volume Down (-) buttons on the TV (not on the remote), and then (while holding the buttons down) plug the AC power cord back in. Continue to hold the buttons down until Erasing screen appears.
How do I get the secret menu on my LG TV?
The best way to access the secret menu on your TV is to use the original remote. Hold the TV’s menu button and the remote’s menu button at the same time. If you see a password request, let go of both buttons and enter your TV’s password, which could be 0000, 67531, or 7777.
What should I replace my plasma TV with?
OLED, or organic light-emitting diode, is the legitimate successor to plasma and perhaps the only choice for those looking for the best picture quality without compromise.
Are old plasma TVs worth anything?
The older models are not worth much.. Almost nothing.. This is why some give it away for free to friends or familie, because making someone happy is often more worth then the money you get..
How do you fix a scratch on a plasma TV?
If there are mild scratches, you can use Colgate toothpaste or Vaseline (petroleum jelly) applied with a Q-tip. Put the toothpaste or petroleum jelly on the cotton tip and rub this across the scratch, back and forth for approximately two to five minutes.
What happens when your TV goes black but has sound?
The device you are using may have a temporary fault and needs to be reset. A hidden fault within HDMI cable – Replace with new High-Speed HDMI 2.0 cable. Replace the HDMI cable as it may have a short or another defect which causes the black screen issue. Unplug the TV for 5 minutes to attempt a reset.
Why has my TV screen gone black?
If the TV MENU appears, then the issue is coming from one of your sources or components. Black TV Screen Solution 1: This would mean that either a CABLE BOX, SAT BOX, COAX CABLE, HDMI CABLE, ETC may not be working properly, something is loose, or needs reset.
How do you fix a plasma TV screen?
How to Fix a Cracked Plasma TV Screen
- Turn on the TV. …
- Turn the screen off and unplug the TV if the TV appears to be in working order except for the crack.
- Apply a thick coat of petroleum jelly to the crack. …
- Reapply the petroleum jelly and rub off again, if necessary.
