Error 01 and 17– These error codes mean there has been a water level error detected in the washing machine, you should check the supply hoses and filters to make sure it’s not a simple block or hose kink.
similarly, How do I reset the code on my Siemens washing machine?
How to reset an error code on a washing machine by Bosch, Neff, or Siemens. Press and hold down on the spin button and simultaneously turn the dial to the 7 o’clock position. Hold the spin button for around 5 seconds and then release.
on the other hand, How do I reset my washing machine?
To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.
also, How do I reset my Siemens iq500? Moreover, how do I reset my Siemens iq500 washing machine? Then press and hold the spin button, while also moving the dial to the 7 o’clock position. Continue to hold the spin button for at least five more seconds then move the dial back to the off/ reset position.
What is error E17 in Siemens washing machine?
E17 appears in the display: Water supply time exceeded.
Check the water pressure directly on the tap using a bucket. … Contact your fitter if the water pressure is too low. Please additionally check filters in the water connection of the supply or whether AquaStop hose blocked.
How do I reset my iq300 washing machine?
How do I reset my Siemens iq300 washing machine?
- Turn the dial to the off or reset position (should be at the 12 o’clock position)
- Turn the dial to the 6 o’clock position.
- Press and hold down on the spin button and simultaneously turn the dial to the 7 o’clock position.
How do I reset my Siemens iq500?
We can try erasing the stored error codes from memory.
- Turn the knob to off.
- Close the door.
- Turn the knob to 6 o’clock position.
- Wait 2 seconds.
- The start/pause should begin flashing.
- Press and hold the spin button.
- Turn the knob to 7 o’clock position.
- Wait 2 seconds.
How do I reset my LG washing machine?
How to reset the washing machine:
- Press POWER to turn the washer off.
- Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
- With the power disabled, press and hold the START/PAUSE button for 5 seconds.
- Plug the washer back in, or turn the circuit breaker back on.
Does unplugging a washer reset it?
On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it. Although not usually a button, programmable washing machines might have a reset function or position to clear a program problem.
How do I know if my washing machine control board is bad?
A failed front-load washing machine control board has several symptoms, including the washer not starting, filling, spinning or draining.
How to unlock Siemens iq500?
Press and hold the start button for several seconds and see if this turns it off. If not then see if theres a finish in / ready in button. It will have a picture of a clock on it. Press and hold this button for several seconds and that should turn the lock off from there.
How to reset Siemens machine?
How do I reset my Siemens washing machine?
- Turn off the machine (dial to 0)
- Open the door.
- Turn on the machine on first program.
- Close the door.
- Turn off the machine.
- Turn on the machine on the “six-o-clock” program, which is centrifuge.
How do you unlock a Siemens iq300 washing machine?
To turn it off all you need to do is press and hold the Spin Speed and Read in buttons together for several seconds and the key light will go off and then you should be able to open the door from there.
How long does a washing machine last?
The average lifespan of a washing machine is 11 years, according to HowStuffWorks.
Why does my washing machine not start?
You should check the outlet to make sure it’s working. Then, check if a fuse is blown or a circuit breaker thrown. If those both work, see if the Delay Start button or Control Lock feature has been activated. Sometimes it’s as simple as opening and closing the door to reset the washer.
How do you unlock a Siemens iq500 washer?
Press and hold the start button for several seconds and see if this turns it off. If not then see if theres a finish in / ready in button. It will have a picture of a clock on it. Press and hold this button for several seconds and that should turn the lock off from there.
How do you unlock Siemens iq500?
Press and hold the start button for several seconds and see if this turns it off. If not then see if theres a finish in / ready in button. It will have a picture of a clock on it. Press and hold this button for several seconds and that should turn the lock off from there.
How do you unlock Siemens iq700?
On your machine, you need to press and hold the options down (arrow pointing down) button till it unlocks. You may need to have it on the program it was on when it was locked.
Is there a reset button on LG washer?
The easiest way to reset your LG washer if you need to interrupt a cycle or add to a laundry load already started is to simply press the Power button to cancel the cycle. Once you turn the machine off, it cancels the settings and resets the washer for use.
How do I clear the IE code on my LG washer?
Turn off the home’s hot and cold water supply taps/valve. Remove the water inlet hoses from the washer. Ensure to have a bucket to drain the remaining water from the hoses. Check the inlet filters on the inlet valves of the washer, inspect for any mineral deposits or other debris that may be clogging them.
Why does my LG washer keep shutting off?
Common solutions for: LG Washer stops mid cycle
If the washer door is not latched shut, the door switch prevents the washer from operating. If the door lock is defective, the washer may stop mid cycle. … Inspect the door lock for damage. If the door lock is damaged or does not latch properly, replace it.
Why do I have to keep unplugging my washing machine?
Normally this is an indication that the door switch is bad ,and not telling the control that the door has been opened . And the control will not start another cycle unless you open the door. But when you turn the power off then back on ,all you are doing is reseting the controls memory.
Why is my washer just filling with water?
If your washer continues to fill during a cycle, the water inlet valve could be at fault. … If the washer continues to fill, then the water inlet valve is defective. If the washer stops filling, then the problem is related to the electrical circuit that controls the valve.
Is there a way to reset a Whirlpool washer?
Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.
Don’t forget to share the post !