Take the left and right earbuds out the case and long press the touch control area at the same time for about 3 seconds or until you see a white LED light flashing on both earbuds. It is very important that you long press the left and right earbud at the same time.
similarly, How do I get my Bluetooth earbuds to work?
You must pair the two Bluetooth headsets at the same time , otherwise only one will pair . 1- press both bottons till you see a blue flashing light (don’t stop pressing when you see alternating blue /red lights ) 2. Open the Bluetooth and search for tws-k2 on your phone , click one of them to pair .
on the other hand, Why is only one of my earbuds working?
Headsets may play only in one ear depending on your audio settings. So check your audio properties and make sure that the mono option is turned off. In addition, make sure that voice levels are balanced on both earbuds. … The voice levels must be equal on both sides of your headset.
also, Why won’t my earbuds connect to each other? Step 1: While the headphones are charging (the white LED indicator of earbuds is on), double-press the power keys of both sides to reset the headphones. Remove both the headphones from charging case, then both headphones power on automatically and connect each other within 60 seconds. … Take both earbuds out.
Why is one of my Bluetooth earbuds not working?
Reset the Earbuds. The easiest solution is to reset the wireless earphones. A factory reset will likely resolve any connectivity issues causing the problem. … In earbuds that don’t have the option to fully reset, simply disconnect the Bluetooth and connect again.
How do I fix my earbuds without sound?
This can be fixed in four easy steps.
- Step 1: Identify the Problem Areas. When using the earphones, listen to see which side cuts out. …
- Step 2: Twist the Cord Until You Hear Sound from Both Sides. …
- Step 3: Secure the Cord. …
- Step 4: Consider Replacing the Earphones.
How do you reset Bluetooth earbuds?
EASY BLUETOOTH HEADPHONE RESET: Turn off bluetooth headphones, reset bluetooth headphones by pressing power button for 15 seconds, delete the bluetooth headphones from your phone or device paired list, restart your device and re-pair the bluetooth headset.
Why can I only hear out of one Bluetooth earbud?
Mono basically plays the same audio in both ears, but can sometimes cause this issue. The balance problem occurs when the balance scale may be turned all the way to the left or right. You can check for mono and balance settings in your device’s Accessibility settings. You’ll see a slider displaying left and right.
How do I fix my earbuds if only one works?
Simple Fix To One Headphone not working Right/Left
- Jack not inserted properly. …
- Check your sound balance in device settings. …
- Mono sound setting. …
- Dirty Earbuds. …
- Inspect the wires for damage. …
- Problem with the device headphone slot. …
- Check for signs of water damage. …
- Re-pairing wireless headphones.
Why does my left Apple earbud not work?
Check for debris, damage, or loose connections
Check your headphone cable, connector, remote, and earbuds for damage, like wear or breakage. Look for debris on the meshes in each earbud. … Firmly plug your headphones back in. If your iOS device has a case, remove the case to get a firm connection.
How do you get both earbuds to work?
You need to press the soft touch panel on each earbud at the same time so they sync first, then turn on your devices Bluetooth and select connect (ignoring the mono option) and vola stereo sound!
What do I do if my headphones dont work?
Android settings prevent headphones from working
If they’re still not working, your headphones are the problem. If your headphones do work in another device but not in your smartphone, your phone’s the problem. Check your sound settings. … Tap on Volume and similar settings to make sure your sound settings are turned on.
Why does my left earbud not work?
Sometimes, the issue could be with a device setting, loose jack, or tangled wires. Using simple methods, you should be able to resolve the problem of one side earbud not working. Throwing away faulty earbuds always seems to be the easy way out.
Why do my earbuds have no sound?
Make sure your audio source is on and the volume is up. If your headphones have a volume button or knob, make sure to turn it up. … Make sure the headphone jack is firmly plugged into the correct audio jack. If the audio source uses a line remote, disconnect the remote and plug directly to the audio source.
Why can’t I hear out of my left earbud?
If you only hear audio from the left side of your headphones, make sure the audio source has stereo output capability. IMPORTANT:A mono device will only output sound to the left side. Generally, if a device has an output jack labeled EARPHONE it will be mono, while an output jack labeled HEADPHONE will be stereo.
How do you reset earbuds?
The typical procedure of resetting earbuds like these is 1) Place the earbuds in the charging case and leave the case lid open, and 2) Press & Hold the button on the charging case for 10+ seconds, you should then see a change on the indicator light on the charging case that indicates a successful reset.
Why is my right earbud not working?
Sometimes, the issue could be with a device setting, loose jack, or tangled wires. Using simple methods, you should be able to resolve the problem of one side earbud not working. Throwing away faulty earbuds always seems to be the easy way out.
Why are my wireless earbuds not charging?
If your Bluetooth® headset will not accept a charge, the battery may need to be replaced or there may be a loose connection. … The headset may not charge if another USB cable is used. Verify that the USB cable is firmly connected to both the headset jack and the USB port on the computer.
Why is only one side of my earbuds working?
There can be many reasons that a pair of headphones only play audio out of one ear. The most common reason for sound to only come out of one side is the wires near the audio jack have gotten bent back and forth so many times that it has caused a short in the wiring.
Why is my right Apple earbud not working?
Check for debris, damage, or loose connections
Check your headphone cable, connector, remote, and earbuds for damage, like wear or breakage. Look for debris on the meshes in each earbud. … Firmly plug your headphones back in. If your iOS device has a case, remove the case to get a firm connection.
What to do if earphone is not working?
How to Fix Headphones That Aren’t Working
- Turn on the headphones. …
- Turn the headphones off and on again. …
- Charge the headphones. …
- Check the USB power requirements. …
- Check USB compatibility. …
- Turn on Bluetooth on the headphones. …
- Turn up the volume. …
- Successfully pair the Bluetooth headphones with the device.
Why is only one of my Apple earbuds working?
Answer: A: Try going to Settings>General>Accessibility, and look under the Hearing Section. There is a place there to set the audio volume balance between the left and right channels. See that the slider is positioned in the center.
Why is only one of my Indy earbuds working?
Turn off Bluetooth mode on your device (mobile or computer) Power on only your right Indy™ Wireless earbud by removing it from the case. It will be in a non-connected state at this point. … Next, remove both earbuds from the case to have them automatically power on and begin pairing to one another.
Don’t forget to share the post !