Take the left and right earbuds out the case and long press the touch control area at the same time for about 3 seconds or until you see a white LED light flashing on both earbuds. It is very important that you long press the left and right earbud at the same time.
Table of Contents
READ ALSO
Likewise, What to do if one of your wireless earbuds stop working?
- Check your source. …
- Re-pair the headphones. …
- Bring the headphones closer to your device. …
- Pair individual buds properly. …
- Disconnect other devices. …
- Update the firmware. …
- Turn off any audio processing. …
- Adjust your Bluetooth audio codec.
Also, Why is only one side of my Bluetooth earbuds working?
Mono basically plays the same audio in both ears, but can sometimes cause this issue. The balance problem occurs when the balance scale may be turned all the way to the left or right. You can check for mono and balance settings in your device’s Accessibility settings. You’ll see a slider displaying left and right.
Moreover, How do I sync my earbuds to my phone?
How to pair Bluetooth headphones with your phone
- Open the Settings app on your phone.
- Tap Connected devices.
- Tap Pair new device.
- Make sure your headphones are in pairing mode (see the owner manual on how to do this).
- Tap the headphones under the list of available devices.
How do you get both earbuds to work?
You need to press the soft touch panel on each earbud at the same time so they sync first, then turn on your devices Bluetooth and select connect (ignoring the mono option) and vola stereo sound!
Why does my left earbud not work?
Sometimes, the issue could be with a device setting, loose jack, or tangled wires. Using simple methods, you should be able to resolve the problem of one side earbud not working. Throwing away faulty earbuds always seems to be the easy way out.
How to fix a headphone with one side working?
Start by resetting the Bluetooth headphones. If that doesn’t work, it’s time to employ some other measures. Go to the settings and make sure that the headphones are not set on mono or phone option. Both these options play audio through one headphone, so disabling these settings may be enough to resolve the issue.
How do I fix my earbuds without sound?
This can be fixed in four easy steps.
- Step 1: Identify the Problem Areas. When using the earphones, listen to see which side cuts out. …
- Step 2: Twist the Cord Until You Hear Sound from Both Sides. …
- Step 3: Secure the Cord. …
- Step 4: Consider Replacing the Earphones.
Why does my left earbud not work?
If the earphones work OK in another device: – Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Why is only one of my Indy earbuds working?
Turn off Bluetooth mode on your device (mobile or computer) Power on only your right Indy™ Wireless earbud by removing it from the case. It will be in a non-connected state at this point. … Next, remove both earbuds from the case to have them automatically power on and begin pairing to one another.
How do you reset earbuds?
The typical procedure of resetting earbuds like these is 1) Place the earbuds in the charging case and leave the case lid open, and 2) Press & Hold the button on the charging case for 10+ seconds, you should then see a change on the indicator light on the charging case that indicates a successful reset.
How do you sync iPhone earbuds?
Pair your device with a Bluetooth accessory
- On your device, go to Settings > Bluetooth and turn on Bluetooth. …
- Place your accessory in discovery mode and wait for it to appear on your device. …
- To pair, tap your accessory name when it appears onscreen.
How do I fix my left AirPod?
If your left or right AirPod isn’t working
- Make sure that your charging case is fully charged.
- Place both AirPods in your charging case and let them charge for 30 seconds.
- Open the charging case near your iPhone or iPad.
- Check the charge status on your iPhone or iPad to make sure that each AirPod is charging .
How can I repair my earphone?
Photo 2: Solder the connection
Add solder. Then remove the hot iron and hold the wire in place until the solder cools. Cheap earbuds are disposable, but don’t toss out an expensive pair. If the problem is a broken connection, you can fix them yourself with a soldering iron and electronics solder.
How do you fix earbuds?
How to Fix Earbuds That Won’t Work
- Turn on the earbuds’ power source. Some earbuds have power sources. …
- Turn on the audio source or turn up the volume. …
- Clean the earbuds. …
- Unplug and reconnect wired earbuds. …
- Check the Bluetooth connection with wireless earbuds. …
- Connect the earbuds to another audio source.
Why do my earbuds have no sound?
Make sure your audio source is on and the volume is up. If your headphones have a volume button or knob, make sure to turn it up. … Make sure the headphone jack is firmly plugged into the correct audio jack. If the audio source uses a line remote, disconnect the remote and plug directly to the audio source.
How do I get my earbuds to work?
Without any further delay, let’s get started.
- Make sure your headphones aren’t broken. …
- Check to see if the smartphone is connected to a different device via Bluetooth. …
- Clean the headphone jack. …
- Check audio settings and restart the device. …
- Time to call the repairman.
Can you fix earbuds that only work on one side?
If a single earbud only cuts out occasionally, try twisting and taping the cord until sound comes through it again. If twisting the cord doesn’t work, you may need to open the earbud and solder the connection if you’re able to. In some cases, you may need to buy new earbuds.
How do I fix my left earphones not working?
Simple Fix To One Headphone not working Right/Left
- Jack not inserted properly. …
- Check your sound balance in device settings. …
- Mono sound setting. …
- Dirty Earbuds. …
- Inspect the wires for damage. …
- Problem with the device headphone slot. …
- Check for signs of water damage. …
- Re-pairing wireless headphones.
How do I connect my Indy fuel earbuds to my Iphone?
Sync the buds together:
- Place the buds back in the case until both LED’s show red, and then pull them back out.
- Both buds will automatically power ON and the LED’s will simultaneously flash BLUE while they sync to each other.
How do I pair my Indy earbuds to my phone?
For Android devices: Click “+ Pair New Device” and select Indy™ Evo to pair your earbuds to your device. IMPORTANT – Select all “Pair” and “Ok” prompts that will pop up on your screen.
How do I reset my Bluetooth earbuds?
EASY BLUETOOTH HEADPHONE RESET: Turn off bluetooth headphones, reset bluetooth headphones by pressing power button for 15 seconds, delete the bluetooth headphones from your phone or device paired list, restart your device and re-pair the bluetooth headset.
How do you reset wireless earbuds?
Remove earbuds from case and hold down buttons for a few seconds until they shut off. Starting with earbuds in the OFF position hold down buttons on both earbuds for around 10 seconds. The LEDs will blink Red and White 3 times. This will reset your earbuds.
How do you reset Bluetooth earbuds?
If the Bluetooth headset has the design of power key and two volume keys, you can press and hold the [Power switch] key and the [Volume +] key at the same time for 15 seconds, then the Bluetooth headset will automatically restore the factory settings and turn off, and can be used after restart.
