Take the left and right earbuds out the case and long press the touch control area at the same time for about 3 seconds or until you see a white LED light flashing on both earbuds. It is very important that you long press the left and right earbud at the same time.
Likewise, How do I fix my earbuds without sound?
This can be fixed in four easy steps.
- Step 1: Identify the Problem Areas. When using the earphones, listen to see which side cuts out. …
- Step 2: Twist the Cord Until You Hear Sound from Both Sides. …
- Step 3: Secure the Cord. …
- Step 4: Consider Replacing the Earphones.
Also, Why is only one of my earbuds working?
Headsets may play only in one ear depending on your audio settings. So check your audio properties and make sure that the mono option is turned off. In addition, make sure that voice levels are balanced on both earbuds. … The voice levels must be equal on both sides of your headset.
Moreover, Why is only one side of my Bluetooth earbuds working?
Mono basically plays the same audio in both ears, but can sometimes cause this issue. The balance problem occurs when the balance scale may be turned all the way to the left or right. You can check for mono and balance settings in your device’s Accessibility settings. You’ll see a slider displaying left and right.
Why won’t my earbuds connect to each other?
Step 1: While the headphones are charging (the white LED indicator of earbuds is on), double-press the power keys of both sides to reset the headphones. Remove both the headphones from charging case, then both headphones power on automatically and connect each other within 60 seconds. … Take both earbuds out.
How do I fix my earbuds sound?
When your headset is playing only in one ear, rule out possible device setting issues then follow these quick fixes to get your earphones working again.
…
Ruling Out Phone or PC Settings
- Try another pair of earphones. …
- Restart the device. …
- Check the settings. …
- Clean the headphone jack.
Why is only one of my earbuds working?
Broken Wire. If all of the above solutions fail to fix the problem of sound on one of the earbuds only, the most likely issue is a broken wire inside the earbud. You’ll need to open the earbud and check for any broken or displaced wires inside. … You can either try it yourself and see if you can find a broken wire.
How do you reset earbuds?
The typical procedure of resetting earbuds like these is 1) Place the earbuds in the charging case and leave the case lid open, and 2) Press & Hold the button on the charging case for 10+ seconds, you should then see a change on the indicator light on the charging case that indicates a successful reset.
How do I fix my earbuds if only one works?
If a single earbud only cuts out occasionally, try twisting and taping the cord until sound comes through it again. If twisting the cord doesn’t work, you may need to open the earbud and solder the connection if you’re able to. In some cases, you may need to buy new earbuds.
Why is only one of my Indy earbuds working?
Turn off Bluetooth mode on your device (mobile or computer) Power on only your right Indy™ Wireless earbud by removing it from the case. It will be in a non-connected state at this point. … Next, remove both earbuds from the case to have them automatically power on and begin pairing to one another.
Why is my left earbud not working?
If the earphones work OK in another device: – Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
How do you fix one side of Bluetooth earbuds not working?
To fix wireless headphones or Bluetooth Earbud whose one side only work simply start by booting your headphones, if it doesn’t solve the issue then resetting its Bluetooth and re-pairing it is your next step.
How do you reset wireless earbuds?
The typical procedure of resetting earbuds like these is 1) Place the earbuds in the charging case and leave the case lid open, and 2) Press & Hold the button on the charging case for 10+ seconds, you should then see a change on the indicator light on the charging case that indicates a successful reset.
How do you pair both earbuds?
How to Connect Bluetooth Headphones to Android Phone
- First Open Settings. …
- Next, tap Connections.
- Then tap Bluetooth. …
- Then tap Scan at the top-right corner of your screen.
- Next, press and hold the power button on your headphones. …
- Finally, find your headphones and tap them.
Why wont my wireless earbuds turn on?
If your Bluetooth headphones won’t turn on, it’s probably not broken. You simply need to reset it. … If your device can find the headphones, but the two won’t pair successfully. If your headphones keep disconnecting from your device, even though they’re both fully charged.
How do you reset Bluetooth earbuds?
EASY BLUETOOTH HEADPHONE RESET: Turn off bluetooth headphones, reset bluetooth headphones by pressing power button for 15 seconds, delete the bluetooth headphones from your phone or device paired list, restart your device and re-pair the bluetooth headset.
Why is only one side of my wireless earbuds working?
If only one speaker side works when connecting via Bluetooth (wireless), this means that one of the small mechanical triggers in the jack port is stuck in a position of halfway, this will tell your headphone speakers to function via the audio aux cable instead of the Bluetooth technology…
How do you reset wireless earbuds?
Remove earbuds from case and hold down buttons for a few seconds until they shut off. Starting with earbuds in the OFF position hold down buttons on both earbuds for around 10 seconds. The LEDs will blink Red and White 3 times. This will reset your earbuds.
Why won’t my wireless earbuds turn on?
If your Bluetooth headphones won’t turn on, it’s probably not broken. You simply need to reset it. … If your device can find the headphones, but the two won’t pair successfully. If your headphones keep disconnecting from your device, even though they’re both fully charged.
How do you reset Boltune earbuds?
In order to perform a “factory reset“, turn the earphones off. Then press and hold the multi function button for approx 10 seconds until the LED flashes purple twice. The device is now reset and can be paired with a new device.
Why are my Indy fuel wont pair together?
Check to see if the removable Stability Ear Gel or in-ear gels have been twisted or are falling off. This could be keeping the buds from sitting correctly in the case. If you’re having a hard time closing the lid completely, it is likely because the earbuds are not set correctly or the gels are interfering.
How do you pair wireless earbuds to each other?
First, you will need to pair the earbuds to each other, then to the phone.
- Turn them both on at the same time, holding down the buttons until they flash red then blue.
- Once they both are flashing at the same time, you’ll double press a button on ONE earbud.
- The earbud will say it’s connected.
Why does my left Apple earbud not work?
Check for debris, damage, or loose connections
Check your headphone cable, connector, remote, and earbuds for damage, like wear or breakage. Look for debris on the meshes in each earbud. … Firmly plug your headphones back in. If your iOS device has a case, remove the case to get a firm connection.