Take the left and right earbuds out the case and long press the touch control area at the same time for about 3 seconds or until you see a white LED light flashing on both earbuds. It is very important that you long press the left and right earbud at the same time.
Table of Contents
READ ALSO
Likewise, Why do my earbuds not work?
Check audio settings and restart the device
There’s also a chance the problem isn’t with the jack or the headphones you’re using but has to do with the device’s audio settings. … Just open up the audio settings on your device and check the volume level and any other settings that might mute the sound.
Also, Why is only one of my earbuds working?
Headsets may play only in one ear depending on your audio settings. So check your audio properties and make sure that the mono option is turned off. In addition, make sure that voice levels are balanced on both earbuds. … The voice levels must be equal on both sides of your headset.
Moreover, How do you pair both earbuds?
How to Connect Bluetooth Headphones to Android Phone
- First Open Settings. …
- Next, tap Connections.
- Then tap Bluetooth. …
- Then tap Scan at the top-right corner of your screen.
- Next, press and hold the power button on your headphones. …
- Finally, find your headphones and tap them.
Why is only one of my Bluetooth earbuds connecting?
Mono basically plays the same audio in both ears, but can sometimes cause this issue. The balance problem occurs when the balance scale may be turned all the way to the left or right. You can check for mono and balance settings in your device’s Accessibility settings.
How do you reset earbuds?
The typical procedure of resetting earbuds like these is 1) Place the earbuds in the charging case and leave the case lid open, and 2) Press & Hold the button on the charging case for 10+ seconds, you should then see a change on the indicator light on the charging case that indicates a successful reset.
Can’t connect to Bluetooth earphones?
What you can do about Bluetooth pairing failures
- Make sure Bluetooth is turned on. …
- Determine which pairing process your device employs. …
- Turn on discoverable mode. …
- Make sure the two devices are in close enough proximity to one another. …
- Power the devices off and back on. …
- Remove old Bluetooth connections.
How do I fix my earbuds if only one works?
Simple Fix To One Headphone not working Right/Left
- Jack not inserted properly. …
- Check your sound balance in device settings. …
- Mono sound setting. …
- Dirty Earbuds. …
- Inspect the wires for damage. …
- Problem with the device headphone slot. …
- Check for signs of water damage. …
- Re-pairing wireless headphones.
Why is only one side of my wireless earbuds working?
If only one speaker side works when connecting via Bluetooth (wireless), this means that one of the small mechanical triggers in the jack port is stuck in a position of halfway, this will tell your headphone speakers to function via the audio aux cable instead of the Bluetooth technology…
Why is only one of my Indy earbuds working?
Turn off Bluetooth mode on your device (mobile or computer) Power on only your right Indy™ Wireless earbud by removing it from the case. It will be in a non-connected state at this point. … Next, remove both earbuds from the case to have them automatically power on and begin pairing to one another.
How do you pair f9 earbuds together?
Take both earbuds out of the charging case. Touch and hold both Touchpads until the LED indicators flash white and blue alternately and release, then wait for two earbuds sync with each other automatically.
Why does my left earbud not work?
Sometimes, the issue could be with a device setting, loose jack, or tangled wires. Using simple methods, you should be able to resolve the problem of one side earbud not working. Throwing away faulty earbuds always seems to be the easy way out.
How do I reset my fake AirPods?
Resetting the Fake AirPods
- Step 1: First of all, make sure that both your earbuds are in the case. …
- Step 2: Ensure that both the earbuds and the charging case are charged. …
- Step 3: Locate the button on your case. …
- Step 4: Press and hold the button you just located for at least 15 seconds.
How do I force a Bluetooth device to pair?
Go to settings, Bluetooth, and find your speaker (There should be a list of Bluetooth devices that you last connected to). Tap on the Bluetooth speaker to connect, then turn the speaker on AFTER you pressed the connect button, while your device is trying to connect to it.
Can’t connect to Bluetooth?
Step 1: Check Bluetooth basics
- Turn Bluetooth off and then on again. Learn how to turn Bluetooth on and off.
- Confirm that your devices are paired and connected. Learn how to pair and connect via Bluetooth.
- Restart your devices. Learn how to restart your Pixel phone or Nexus device.
Why won’t my Bluetooth headphones turn on?
If your Bluetooth headphones won’t turn on, it’s probably not broken. You simply need to reset it. … If your device can find the headphones, but the two won’t pair successfully. If your headphones keep disconnecting from your device, even though they’re both fully charged.
How do I fix my earbuds without sound?
This can be fixed in four easy steps.
- Step 1: Identify the Problem Areas. When using the earphones, listen to see which side cuts out. …
- Step 2: Twist the Cord Until You Hear Sound from Both Sides. …
- Step 3: Secure the Cord. …
- Step 4: Consider Replacing the Earphones.
Why does my left Apple earbud not work?
Check for debris, damage, or loose connections
Check your headphone cable, connector, remote, and earbuds for damage, like wear or breakage. Look for debris on the meshes in each earbud. … Firmly plug your headphones back in. If your iOS device has a case, remove the case to get a firm connection.
Why are my Indy fuel wont pair together?
Check to see if the removable Stability Ear Gel or in-ear gels have been twisted or are falling off. This could be keeping the buds from sitting correctly in the case. If you’re having a hard time closing the lid completely, it is likely because the earbuds are not set correctly or the gels are interfering.
How do I pair my Indy earbuds to my phone?
For Android devices: Click “+ Pair New Device” and select Indy™ Evo to pair your earbuds to your device. IMPORTANT – Select all “Pair” and “Ok” prompts that will pop up on your screen.
How do I fix my earbuds if only one works?
If a single earbud only cuts out occasionally, try twisting and taping the cord until sound comes through it again. If twisting the cord doesn’t work, you may need to open the earbud and solder the connection if you’re able to. In some cases, you may need to buy new earbuds.
How do you reset live buds?
First, navigate to and open the Galaxy Wearable app on your Galaxy phone. For the Galaxy Buds+, Galaxy Buds Live, and Galaxy Buds Pro, tap General. Tap Reset, and then tap Reset to confirm.
How do I reset my F9 Bluetooth earbuds?
Press and hold the power button for about 5 seconds until the LED flashes PINK. The earbuds will turn off and the next time you power them on, they will automatically enter pairing mode (LED alternates between flashing RED & BLUE.)
Why does only one Bluetooth earbud connect?
Mono basically plays the same audio in both ears, but can sometimes cause this issue. The balance problem occurs when the balance scale may be turned all the way to the left or right. You can check for mono and balance settings in your device’s Accessibility settings.
How do you pair true wireless earbuds?
How to Link Wireless Earbuds on Android
- Swipe down the Notifications shade.
- Press and hold the Bluetooth icon in the top row of icons. …
- First, make sure Bluetooth is turned On. …
- Tap Pair.
