How do you reset a Bosch washing machine? Press and hold down on the spin button and simultaneously turn the dial to the 7 o’clock position. Hold the spin button for around 5 seconds and then release. Turn the dial to the off positionIt may take a few attempts for the machine to reset.
similarly, How do I fix e16 error on my Bosch washing machine?
The door is not locked properly
Open and close the door again and press the “start reload” button (play and pause button). If necessary, open the washing machine door, remove some of the cothing items and then push the door closed again.
on the other hand, How do you unlock a front load washer?
How To Open A Front Load Washing Machine Door After Starting The Wash Cycle
- How to unlock washer door? …
- Within at least 5 minutes of pressing the START/WASH button, press the START/PAUSE button to unlock the washer door. …
- Now open the washing machine door once unlocked and add or remove any extra clothing.
also, How do you do a factory reset on a washing machine? Reset your washing machine
Resetting your washing machine is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.
Why will my Bosch washing machine door not open?
A problem with the door both opening and closing properly can be caused by clothes, especially smaller garments such as socks. These can get jammed between the door and the washing machine housing. Ensure that there are no clothes caught between the door and the housing before starting a programme.
What is E16 error on Bosch washing machine?
Washing machine troubleshooting: error code E16 or F16
These error codes indicate that the door is open. Please close the door and proceed as usual. If you’re still getting the error after closing the door, please verify it’s properly closed.
What is E16 error code?
An E16 error code means there is a heater insulation problem which could cause the tripping of your fuse box and other random cycle errors, but it’s hard to prove without the replacement of your heater. An E17 error code means that there is an issue with the motor tachometer and could result in your motor not spinning.
How do you fix E17 error on a Bosch washing machine?
Fix Error Code E17 & E13 Bosch Vision 500 With Aquashield
- Step 1: I Will Start With the E17 Code! …
- Step 2: Open the Water Sensor Housing Case and Remove the Sensor Switch! …
- Step 3: Disable the E17 Flood Control Switch. …
- Step 4: Clean Out the Pump on Your Bosch Vision 500 Washer. …
- Step 5: First You Must Drain Your Machine.
How do you bypass a washing machine door lock?
One of the main ways of bypassing a washing machine door lock is by disabling the safety circuit. It is good to note that the process involves cutting of electrical wires. Thus, you need to disconnect your machine from the main power supply. Additional, cutting the cord may void your warranty.
Why is my washer stuck on lid lock?
– Lock striker that presses down on the lid switch may be out of alignment. – A piece of lint or washing machine detergent has built up over time and hinders the locking of the lid. – The control board sees an open lid switch when it attempts to lock.
Does unplugging a washer reset it?
On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it. Although not usually a button, programmable washing machines might have a reset function or position to clear a program problem.
Why is the washing machine door not opening?
The most common cause is water left in machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray). The door interlock has simply jammed.
How do I know if my washing machine control board is bad?
A failed front-load washing machine control board has several symptoms, including the washer not starting, filling, spinning or draining.
How do you unlock a Bosch front load washer?
Here is how to unlock it-
- Press and hold the start button for three to five seconds until you hear a beep and the key symbol disappears.
- Another way is to press and hold the “rpm” and the “finished in” buttons together until you hear a beep and the symbol disappears.
What do you do when your washing machine door won’t open?
The most common cause is water left in machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray). The door interlock has simply jammed.
What does Error 24 mean on a Bosch dishwasher?
It means that the dishwasher is not draining properly due to the drain filter being blocked. Possible causes for the E24 error code: The drain hose could be blocked. … After fixing the problem, reset the dishwasher according to the owner’s manual.
What does code E15 mean on a Bosch dishwasher?
Dishwasher Troubleshooting: E15 Bosch Dishwasher Error Code
An E15 error code indicates that the safety switch has detected water in the base of the dishwasher. Your leakage protection system has activated.
What does E14 mean on Bosch washing machine?
An E14 error code indicates a flow meter failure or an issue with water flowing into the dishwasher or the filling system. What can I do to solve the E14 Error Code on my dishwasher? Contact Bosch Customer Service at 1-800-944-2904 for further assistance.
What does error code E03 mean?
An E03 error code means that your washing machine has encountered a draining problem.
What does 888 mean on washer?
888 means the PC board is shorted and the display driver that shows what supposed to be a display is not working,I would take the PC board out of the machine,look for water corrosion,it will be like a white puffy kind of stuff,if you see that,you have water damage from some other part inside.
What does Error 13 mean on a Bosch washing machine?
Bosch front load washer displays an e13 error code. It means that the problem is related to water draining. If after the timeout (10 minutes) the water remains in the tank and is not drained, the system gives an error. The device shows it on the scoreboard.
How do you bypass a lid lock?
Put the lid back down and plug the washing machine back into the electrical outlet. Turn on the appliance and lift the lid. If the appliance keeps running, the magnet is in the proper location. If the appliance turns off, you’ll have to lift the lid again and reposition the magnet.
Will washer work without lid lock?
11 Answers. Do I recommend it? NO. The lid lock it to prevent injury to the people near the washer, as without it stopping the machine, the agitator will turn with the lid open.
Don’t forget to share the post !
