How do you reset a Master combination lock if you forgot the code?

To set or reset the combination on your 175, 176, 177, or 178 Master Lock padlock:

1. Open the lock using the previous combination. …
2. Insert the reset tool in the hole on the side of the lock. …
3. Push the reset tool in and turn 90° in either direction. …
4. Set wheels to your new combination.
5. Turn and remove the reset tool.

Likewise, How do you reset a combination lock without the code?

Pull up gently on the shackle and hold it in place. Turn the dial clockwise listening carefully until you hear the lock click. Start with a good deal of pressure and gently let up as you spin it around, until you meet resistance in only one place. If the dial catches every few numbers, you are pulling too hard.

Also, How do you reset the combination on a 4 digit Master Lock?

Steps

1. Open the lock using the old combination.
2. Insert the reset tool into the shackle hole.
3. Turn the reset tool so that the Master logo is facing you.
4. Rotate the dial clockwise 3 times to clear the old combination.
5. Enter your new combination.
6. Remove the reset tool to lock it.
7. Write down the combination in a safe place.

Moreover, How do you unlock a combination 4 Number lock?

TO UNLOCK ON A TRUE FOUR NUMBER COMBINATION

Starting anywhere, turn the dial right (clockwise), stopping when the first combination number comes to the opening index the FIFTH time. 2. Turn the dial left (counterclockwise), stopping when the second number comes to the opening index the FOURTH time.

How do you reset a 4 digit combination lock if you forgot the code?

If you forgot a bike lock combination or the digits to a padlock with a dial, you can try to reset it. Pull on the shackle until you see the wheels turn. When the wheel sticks or catches, move to the next wheel and continue through all the wheels.

How do you unlock a 3 digit Master lock?

Turn the lock until the numbers read right-side-up. Roll the left-most dial until the first number of your combination lines up with the scored hash mark just to the left of the dial. Roll the middle dial until the appropriate number lines up with the number to its left. Do the same for the right-most number.

How do you change the combination on a 4 digit Master lock?

“Set-Your-Own” Combination Locks Instructions FAQ

1. Open the lock (preset at 0-0-0).
2. Turn shackle counterclockwise 180 degree and press it down. You must hold the shackle down while performing the next step.
3. Set the dials to your new combination.
4. Lift and return the shackle to the closed position.

How do you unlock a 4 digit Master Lock?

How to Open a Four Number Combination Lock

1. Find your combination. …
2. Go to the first number. …
3. Set the second dial on the lock to the second number in the combination. …
4. Use the third wheel to find the third number in the combination. …
5. Locate the fourth number in the combination on the bottom wheel on the lock and center it.

How do you open a master lock without a code?

Please follow the steps outlined below:

1. Turn the dial 3 times to the right and stop on the first number of the sequence.
2. Turn the dial to the left, pass the first number of the sequence and stop on the second number.
3. Turn the dial to the right and stop on the third number of the sequence.
4. Pull up on the shackle.