How do you reset error F21?

Reset. When the “F21” error code appears, try pressing “Pause/Cancel” to stop the current wash cycle. If water remains in the washing machine tub, touch “Drain/Spin” to force a secondary drain cycle to remove the water. Once all the water drains, try selecting a new wash cycle and pushing “Start.”

Likewise, What does error code F20 mean on a Whirlpool Duet washer?

An F20 or FH error code indicates a water supply problem. Here are some common issues: Both hot and cold water must be connected and turned on. Water inlet hoses kinked. Water inlet valve screen clogged.

Also, How do I fix error code F21 on Maytag?

What is an F21 or F02 Error Code on my Maytag Front Load Washer? These error codes indicate that drain times are longer than expected .
…
Removing the Error

1. Unplug the washer or disconnect the power for one minute.
2. Plug in the washer or reconnect the power.
3. Re-select the cycle and press Start.

Moreover, How do you run a diagnostic on a Whirlpool Duet washer?

Duet Washer Diagnostic Test Mode

Pick any three buttons on the Duet washer control except power, start, or cancel. Now do the key dance within eight seconds… Button 1, Button 2, Button 3, Button 1, Button 2, Button 3, Button 1, Button 2, Button 3 (You are pressing 9 buttons in 8 seconds so it needs to be pretty quick.)

How do you reset a Whirlpool front load washer?

The first way you can reset whirlpool washer top load is by unplugging it for about 2 minutes then plug it back in and wait about 30 seconds before starting the washer again. This performs a hard reset on the machine and it will start over after you reconnect it again.

Why does my washer keep saying F20?

F20 Error Code

Whirlpool error code F20 appears when no water is detected entering the machine or if the pressure switch trip is not detected. The pressure switch is the part of the machine that monitors high water pressure. The washing machine automatically cancels the wash cycle during an F20 error.

How do I fix my Whirlpool Duet F20?

To reset the f20 error code, exclude the program crash of the Whirlpool washer. To do this, de-energize your washing machine for 10-20 minutes, then turn it on back. If the error disappears from the display, the problem is successfully eliminated.

How do I clear the error code on my Maytag front load washer?

To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

What does F21 mean on a Maytag 3000 washer?

In this particular case, error code F21 indicates an issue with your Maytag washing machine’s drain valve. When it takes eight or more minutes for a Maytag washing machine to drain, the device will tell its pipes to close, and you’ll be forced to troubleshoot.

How do I reset my Maytag front load washer?

How to Reset a Maytag Washer

1. Press the “Power/Cancel” button.
2. Push the appropriate button to choose a new cycle.
3. Press “Start/Pause.” You have now reset your Maytag washer.

What does whirlpool diagnostic mode do?

The washer’s diagnostic mode can be used to troubleshoot washer problems by viewing logged washer errors, performing an automatic diagnostic cycle, or manually turning on and off different washer parts to test for proper operation.

Do Whirlpool washers have a reset button?

How to Confirm You Have Reset Your Whirlpool Washing Machine. … Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.

Is there a reset button on Whirlpool Duet washer?

Unplug the washer for 30 seconds to attempt to reset the Duet washer control. You can manually unlock the washer by removing the top (remove screws on the back of the top panel and slide the top panel back to lift off.

How do you manually unlock a Whirlpool front load washer?

Reach up inside the front panel and locate the door latch assembly on the right side of door. Feel for a tear-drop shaped tab on the bottom of the door latch assembly. This tab will manually unlock the door.

How do I reset my Whirlpool Duet washer?

Unplug the washer for 30 seconds to attempt to reset the Duet washer control. if your fill hoses have a flood stop check valve turn the water off, disconnect the hoses and run a little water into a bucket. Then reconnect the hoses to your washer and do a Duet Washer Quick Diagnostic Test.

How do you reset the F20 code on a Maytag washer?

What is an F20 or FH Error Code on my Maytag Front Load Washer? An F20 or FH error code indicates a water supply problem.
…
Removing the Error

1. Unplug the washer or disconnect the power for one minute.
2. Plug in the washer or reconnect the power.
3. Re-select the cycle and press Start.

How do you check the pressure switch on a Whirlpool Duet washer?

Use an ohmmeter to determine whether the pressure switch is malfunctioning.

1. Unplug the Whirlpool Duet washer power cord from the wall outlet. …
2. Go behind the Duet and remove the three screws securing the top panel to the rear panel with a Phillips-head screwdriver. …
3. Locate the pressure switch inside the washer cabinet.

How do you reset a Whirlpool Duet front load washer?

Unplug the washer for 30 seconds to attempt to reset the Duet washer control. if your fill hoses have a flood stop check valve turn the water off, disconnect the hoses and run a little water into a bucket. Then reconnect the hoses to your washer and do a Duet Washer Quick Diagnostic Test.

How do I reset Whirlpool front load washer?

Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.

How do I reset my front load washer?

How to reset the washing machine:

1. Press POWER to turn the washer off.
2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
4. Plug the washer back in, or turn the circuit breaker back on.

How do I reset my Whirlpool front load washer?

The first way you can reset whirlpool washer top load is by unplugging it for about 2 minutes then plug it back in and wait about 30 seconds before starting the washer again. This performs a hard reset on the machine and it will start over after you reconnect it again.

Is there a recall on Maytag washers?

Important: CPSC Recall Remedy Notice Due to COVID-19

Description: The recall involves white Maytag front-load washers with model number MAH9700 and a serial number from 10188468GA through 11683946GJ. The model and serial numbers are located inside the door opening and below the rubber boot.

What does E1 F9 mean on a Whirlpool washer?

F9 E1 Code in the display:

This error code indicates that drain times are longer than expected, typically over eight (8) minutes.

What does F mean on my Maytag washer?

Maytag F/02 – Drain Cycle Too Long

The manufacturer has assigned this error or fault code to indicate that the washing machine drain cycle is taking too long. After 8 minutes of drain time the error code is displayed. … If the error code returns, check to be sure the drain hose isn’t clogged or kinked.