Simultaneously press and hold all 4 temperature adjustment buttons for approximately 3 seconds. A flashing 0 in the refrigerator and freezer displays will indicate that the refrigerator is in Self Diagnostic mode. Use the freezer temperature adjustment buttons to enter the test code number in the freezer display.
similarly, What are the codes on a GE refrigerator?
Refrigerator – Error, Fault or Function Codes
Fault Code | Definition |
---|---|
FF | Check frozen food for thawing because the temperature is rising too high. |
PF | The power to the refrigerator has been interrupted. |
CI | Check the icemaker for proper operation. |
dE | The defrost system has not operated properly in the last 24 hours. |
on the other hand, Does my GE refrigerator have a reset button?
Reset Button on GE Refrigerator
When your GE refrigerator doesn’t respond to the temperature knob, you can rest the unit. Resetting the appliance leads your unit clear and get it back up and operating.
also, How do I reset my GE French door refrigerator? Try resetting the control panel by turning off power to the refrigerator briefly. Unplug the refrigerator or turn it off at the circuit breaker for 30 seconds to reset the control.
What does EF mean on a GE refrigerator?
When set, you will typically see ‘tF’ in the temperature display when set to Turbo Freeze. Note: The symbol may look like an ‘EF’, an upside down f with an F, or something similar. This is not an error code, it is the Turbo Freeze (tF) setting.
What temperature should my GE refrigerator be set at?
Recommended control settings are 0°F for the freezer and 37°F for the fresh food compartment. To view or adjust the current temperature settings, press the Freezer or Fridge pads or “Warmer” or “Colder” pads (depending on the model) until the desired temperature setting is displayed.
What causes a GE refrigerator to stop cooling?
If the condenser coils are dirty, they won’t dissipate the heat effectively. As debris builds up on the coils, the refrigerator becomes less efficient, causing the refrigerator to work harder to cool down. If the coils are significantly dirty, the refrigerator will not be able to maintain the proper temperature.
Does a refrigerator have a reset button?
Most don’t automatically reset. If the appliance has a reset button, it should just need to be held in for 30 seconds to correct the fridge. Some refrigerators, including Maytag and Amana, need to have the lock button and the reset or auto buttons held at the same time to reset the fridge.
What is the coldest setting on a GE refrigerator?
The coldest setting is “9” and the warmest setting is “1”. The “0” setting is OFF, which turns the cooling off. Turn knobs to lower numbers for warmer temperatures and to higher numbers for colder temperatures.
Why is my refrigerator running but not cooling?
Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out. … Plug in the fridge and make sure the fan runs when the compressor is running.
How long does Turbo Cool work on GE refrigerator?
TURBO COOL™ SETTING
The fresh food temperature will revert to the coldest setting for an 8 hour period or until TurboCool is turned off (whichever comes first). It maximizes the cooling ability of the fresh food compartment.
What should my GE fridge and freezer be set at?
What temp should my GE fridge be? The temperature controls for the GE are set in the factory for 37 degrees Fahrenheit for the fridge and 0 degrees Fahrenheit for the freezer.
What does F mean on a refrigerator?
When running on LP, I get fault code F which means the burner did not ignite. For somereason, this is showing up even though the burner does ignite. In fact it ignites and runs all the while the igniter is still clicking as if there is no fire.
Is a fridge colder on 1 or 5?
On every fridge the rules for the coldest settings are always the following: The numbers on the fridge’s temperature dial indicate refrigerant power. The higher the number goes the colder the fridge will maintain. Setting it to 5 will make your fridge the coldest.
What number should my fridge be set at?
What temperature should a refrigerator be? The U.S. Food and Drug Administration (FDA) says the recommended refrigerator temperature is below 40°F; the ideal freezer temp is below 0°F. However, the ideal refrigerator temperature is actually lower: Aim to stay between 35° and 38°F (or 1.7 to 3.3°C).
What temp should I set my fridge at?
Keep the refrigerator temperature at or below 40° F (4° C). The freezer temperature should be 0° F (-18° C).
How do I fix my GE refrigerator not cooling?
Dirty Condenser Coils
- Locate the condenser coils. …
- Unplug the refrigerator.
- Vacuum dust and debris in and around the coils with a narrow hose vacuum attachment.
- Use an appliance brush to remove additional debris.
- Vacuum a second time, including the floor around the coils.
- Restore power to the refrigerator.
What causes a refrigerator to stop cooling?
Problem: Fridge Not Cooling
Be sure the fridge is plugged in and getting power. … Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan).
What is the first thing to check when a refrigerator stops working?
The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.
Can you reset a refrigerator by unplugging it?
Unplug the appliance from the wall socket for 30-45 minutes, then plug it back in. This will reset the device and in some cases it may be enough to completely fix the problem. If a hard reset did not solve the problem, measure the fluid temperature.
What is wrong with refrigerator not cooling?
Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). … Clean the fan blades and spin the fan by hand to see if it’s stuck. Plug in the fridge and make sure the fan runs when the compressor is running.
How do you fix a refrigerator when it’s not cooling?
Depending on what’s causing your fridge not to keep perishable foods cold enough, the following procedures might help.
- Make sure your fridge is getting power.
- Check the refrigerator’s thermostat.
- Test the seals on your fridge doors.
- Determine whether the refrigerator is level.
- Clean the condenser coils.
Should I unplug a refrigerator that is not cooling?
If the coils inside the fridge/freezer are frozen over, then the air can not circulate over the coils and the fridge/freezer will not cool. By unplugging the fridge for 24 hours, the ice melts.
Don’t forget to share the post !