BTU Chart for Sizing an Air Conditioner
Table of Contents
READ ALSO
| Room/Area Size: | Examples: | Recommended BTU: |
|---|---|---|
| 100-200 sq ft | 10×12-10×20, 12×15, 14×14 rooms | 6,000 BTU |
| 200-300 sq ft | 10×20-15×20 rooms, efficiency apartment | 8,000 BTU |
| 300-400 sq ft | 15×20-20×20 rooms, studio apartment | 10,000 BTU |
| 400-500 sq ft | 20×20-20×25 rooms, 1-bedroom apartment | 12,000 BTU |
Likewise, How many square feet will a 14000 BTU air conditioner cool?
14,000 BTUs will cover 500 sq. ft. (4,000 cubic feet)
Also, Is 8000 BTU enough for a bedroom?
Recommended BTU By Room Size
If you are looking for an air conditioner for a room measuring say 10′ x 15′ (150 square feet), the recommended BTU range is up to 5400. … Once you get into 340 and 400 square feet per room, you’d need an 8,000 or 9,000 BTU air conditioner, respectively.
Moreover, Is 400 sq ft small?
How big is a 400-square-foot apartment? Four-hundred square feet is about the size of a two-car garage. It’s not a huge apartment, but it’ll get the job done. After all, two cars take up a lot of space and you won’t actually have two cars parked in your house — the furniture you have will be much smaller!
How many BTUs do I need to cool 1000 square feet?
2. Find the correct cooling capacity for your room size
| Area To Be Cooled (square feet) | Capacity Needed (BTUs per hour) |
|---|---|
| 450 up to 550 | 12,000 |
| 550 up to 700 | 14,000 |
| 700 up to 1,000 | 18,000 |
| 1,000 up to 1,200 | 21,000 |
How much electricity does a 14000 BTU air conditioner use?
Converting BTUs to kilowatt-hours, a measurement equal to one kilowatt of power consumption per hour, you’ll find that a 7,500-BTU PAC consumes about 2.2 kWh, a 10,000-BTU unit 2.9 kWh, and a 14,000-BTU unit 4.1 kWh.
Is 5000 BTU enough for a bedroom?
A 5000 BTU air conditioner is suitable for cooling a room that’s 100-150 sq. … If placed in a bigger room, it will result in energy inefficiency because the AC will run for longer to cool the room. On the upper scale, a 12,000 BTU AC is good for a 450-550 sq. ft room.
Are higher BTUs better?
A heater with a higher BTU rating is more powerful — that is, it has a higher heat output — than one with a low BTU rating. It can do more to raise the temperature in your room each hour, so you can either heat a room more quickly or heat a larger space.
Does higher BTU mean more electricity?
BTU – British Thermal Unit – BTU is a very common term when it comes to HVAC equipment. One BTU is the amount of energy it takes to raise one pound of water one degree Fahrenheit. The higher the BTUs, the more power the system has.
Can 2 people live in 400 square feet?
It’s not something everyone should aspire to. That said, if you’re thinking about downgrading your current living situation and you are interested in minimalist living, living in a 400 sq. ft. space with two adults and two pets is totally doable.
How long is 1000 sqft?
For example, a room that is 50 feet long and 20 feet wide could occupy 1,000 square feet. A triangular room that contains one right angle and has a length of 40 feet and a width of 50 feet could also occupy 1,000 square feet.
How long is 4000 sqft?
4,000 square feet would be a square area with sides of about 63.25 feet.
How many BTUs do I need to heat 1500 square feet?
A 1,500-square-foot home will require between 45,000 to 90,000 BTUs.
How many BTU do I need for 250 square feet?
BTU Sizing Chart for Mini Split Systems
| Area To Be Cooled | Capacity Needed (BTUs Per Hour) |
|---|---|
| 150 to 250 square feet | 6,000 BTUs |
| 250 to 300 square feet | 7,000 BTUs |
| 300 to 350 square feet | 8,000 BTUs |
| 350 to 400 square feet | 9,000 BTUs |
• 18 juil. 2016
How many square feet will a 6000 BTU air conditioner cool?
You’ll need to know your room size too. In general, a 5,000 to 6,000 BTU air conditioner can cool between 100 and 300 square feet.
Is it cheaper to leave the AC on all day?
In general, it is cheaper to leave the AC on all day during very hot temperatures. However, it’s not efficient to keep it on full blast all the time. Your exact results may vary depending on your AC system. … For many systems, this can mean less efficient cooling, more frequent repairs, and higher energy bills.
How much electricity does a 12,000 BTU air conditioner use per hour?
A 12,000 BTU air conditioner uses roughly 900 watts per hour, assuming a minimum SEER rating of 13. You can achieve much more efficient performance with a better rating.
How much does it cost to run a 12,000 BTU air conditioner?
How Much Does it Cost to Run a 12,000 BTU Air Conditioner? A 12,000 BTU air conditioner costs an average of $0.14 per hour to run. If the AC unit is used for 8 hours per day, then it costs $1.12 per day. Running the air conditioner for one month will cost around $33.60.
How many BTUs do I need for AC?
To calculate the size, simply multiply the length times the width of the room or area to be cooled. Then, as a practical number, multiply that total times 25 BTU. This allows ample cooling, whether it is a rainy, moist day or a hot, sunny, humid day.
How big of a room will a 6000 BTU cool?
You’ll need to know your room size too. In general, a 5,000 to 6,000 BTU air conditioner can cool between 100 and 300 square feet. Seven thousand to 8,200 BTU units are adequate for cooling 250 to 550 square feet, while 9,800 to 12,500 BTU models cool up to 950 square feet.
How do you calculate BTU for a room?
Step 1: Measure The Square Footage (Length, Width, Height Exact To 0.25 Ft)
- Square Footage = Measured Length x Measured Width.
- Square Footage = 16 3/4 ft (Length) x 14 1/2 ft (Width) = 243 sq ft.
- BTU Requirement = 500 sq ft x 20 BTU per sq ft = 10,000 BTU.
- Accurate BTU Calculation = 20,000 BTU * 1.1 + 600 BTU = 22,600 BTU.
Is there a big difference between 5000 BTU and 6000 BTU?
Keep in mind that a 5000 BTU AC is rated for “up to” 150 square feet and a 6000 BTU unit is rated for “up to” 250 square feet. In simple terms, that a room 10×15 (150 square feet) or about 15×17 (about 250 square feet). Those are the biggest areas these units can effectively cool and dehumidify.
What happens if you have too much BTU?
More is not better. A unit with too many BTU’s, will cool the room fast, but leave the room humid. Too few BTU’s will never cool the room down and the unit will run incessantly. To be sure you’re making the right decision, call us to get answers about air conditioner sizes and efficiency.
What is the highest BTU air conditioner for 110 volts?
The highest BTU a 110V window air conditioner can generate is 15,000 BTU (you will find one example of 15,000 BTU 110V window AC below). Window air purifiers can achieve almost 30,000 BTU cooling output if hooked up to 230V.
