Press the door switches and the refrigerator temperature button three times within 10 seconds. After releasing the switches, there should be a letter “S” display in the freezer section and an “E” in the refrigerator’s display.
Likewise, What causes a Whirlpool refrigerator to stop cooling?
Dirty condenser coils are the most common cause for a Whirlpool refrigerator not cooling. Condenser coils dissipate heat as the refrigerant passes through them. If the coils are clogged in dirt and debris, they can’t release the heat properly.
Also, How do I run a diagnostic on my Whirlpool refrigerator?
Starting Diagnostics
To start with we need to start the refrigerator’s diagnostic mode. To do this open the refrigerator door and press one or both door switches, depending on your refrigerator type. Next press the refrigerator temperature (+) button three times in ten seconds and release the light switch or switches.
Moreover, What causes a refrigerator to stop getting cold?
As the refrigerant travels through the coils at a high pressure, it cools and turns back into a liquid. Clogged condenser coils can produce poor circulation of air, restricting your fridge’s ability to keep cool.
Can you reset a refrigerator by unplugging it?
Unplug the appliance from the wall socket for 30-45 minutes, then plug it back in. This will reset the device and in some cases it may be enough to completely fix the problem. If a hard reset did not solve the problem, measure the fluid temperature.
How do you fix a Whirlpool refrigerator that is not cooling?
A Whirlpool refrigerator not cooling may have a dirty or damaged gasket that leaks cold air, warming the refrigerator’s interior. Inspect the door gasket for damage, using a cloth dipped in warm water to clean away any dirt and debris. If the gasket is ripped or broken it will need to be professionally replaced.
Why would a refrigerator stop cooling?
Problem: Fridge Not Cooling
Be sure the fridge is plugged in and getting power. … Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan).
What to check if refrigerator stops cooling?
Depending on what’s causing your fridge not to keep perishable foods cold enough, the following procedures might help.
- Make sure your fridge is getting power.
- Check the refrigerator’s thermostat.
- Test the seals on your fridge doors.
- Determine whether the refrigerator is level.
- Clean the condenser coils.
How do you program a Whirlpool refrigerator?
Programming Mode (Version 2):
- Press and hold the WATER Keypad.
- Press and hold LL Keypad.
- Release the WATER Keypad and wait 3 seconds.
- The control will display PE to indicate the programming mode.
- Entry is confirmed by pressing the LL Keypad once more.
- The control will display the current Program CODE.
What is the first thing to check when a refrigerator stops working?
The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.
What to do if fridge is not cooling?
Depending on what’s causing your fridge not to keep perishable foods cold enough, the following procedures might help.
- Make sure your fridge is getting power.
- Check the refrigerator’s thermostat.
- Test the seals on your fridge doors.
- Determine whether the refrigerator is level.
- Clean the condenser coils.
Why would fridge suddenly stop working?
Typical causes are: 1) the door is left open frequently, 2) the condenser coils need cleaning, 3) the door doesn’t seal against the refrigerator box, 4) the cold control is set too cold, or 5) something is blocking the flow of cold air inside the fridge.
How long does a refrigerator last?
Compared to some home appliances, refrigerators actually have a pretty lengthy lifespan. In fact, according to the National Association of Home Builders, the average fridge lasts about 13 years — longer than freezers, dishwashers, trash compactors, and even the typical washing machine.
What is the first thing to check when refrigerator stops working?
The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.
What number should a Whirlpool fridge be set at?
However, a range of 33–40°F (0–4°C) is generally accepted as safe for most purposes. The typical factory setting for Whirlpool® refrigerators is the recommended 37°F (3°C), but temperatures on all refrigerators may need to be set higher or lower depending on your fridge’s environment and other factors.
How long does it take for a Whirlpool refrigerator to get cold?
The key takeaway is that the cooling time varies significantly across brands. For example, Whirlpool refrigerators take 24 hours to cool down, while Samsung models only take 2 hours.
What can damage a refrigerator?
6 Habits That Can Cause Refrigerator Damage
- Overstocking/Understocking Causing Refrigerator Damage. …
- Forgetting to Clean the Coils. …
- Storing Leftovers Improperly. …
- Placing Your Fridge Too Close to the Wall. …
- Leaving the Door Open Too Long. …
- Not Checking the Drainage Hole.
How do you know if your fridge is not working?
Warm food or a defrosting freezer are the obvious signs a refrigerator is malfunctioning. Check for power lights on the water or ice dispenser, if the refrigerator is so equipped. Open the doors and check for lights inside. … Adjust the thermostat inside if there is power, but the refrigerator does not seem cold enough.
How do you know your fridge is dying?
Most refrigerators emit a gentle hum, but if your appliance has recently started buzzing loudly, the motor might be struggling to work properly. Try unplugging the fridge and plugging it back into the socket. If the buzzing doesn’t stop, your fridge is probably dying.
How long should a refrigerator last?
Compared to some home appliances, refrigerators actually have a pretty lengthy lifespan. In fact, according to the National Association of Home Builders, the average fridge lasts about 13 years — longer than freezers, dishwashers, trash compactors, and even the typical washing machine.
How much does it cost to fix a refrigerator that is not cooling?
Some repairs that are generally worthwhile include cleaning a dirty coil, unclogging a drain line, or replacing a faulty thermostat. A fridge that won’t stay cold is usually suffering from a bad thermostat or a dirty coil. Both of these problems can be fixed in about an hour, and will cost about $50 to $250.
Can a refrigerator go out and the freezer still work?
Refrigerator not cooling but freezer is fine
If your freezer is cold but the refrigerator is warm, it is possible that the parts that cool the refrigerator and freezer are working properly. Instead, the problem may reside in the air that is already getting to the freezer also getting to the refrigerator.
How do you diagnose a refrigerator problem?
- Check the temperature setting.
- Assure that there is enough room for air flow in the refrigerator or freezer.
- Check for air flow restrictions in vents.
- Test the temperature control.
- Clean the condensor coils.
- Check the door seals.
- Test the door switch.
- Test the defrost heater.