An icon displays on Samsung washing machine
Table of Contents
READ ALSO
- Garment + The t-shirt with a + icon indicates you can pause the cycle to add more clothing. …
- Child Lock. The smiley face icon indicates Child Lock is turned on. …
- Delay Start. …
- Door Lock. …
- Time Remaining. …
- Signal Off. …
- Pure Cycle or Self Clean. …
- Extra Rinse.
similarly, What does CL mean on Samsung?
The Child Lock function on the Samsung washer locks all the buttons on the machine, other than the power button, so that the wash cycle selected can’t be changed. In addition at the end of the wash cycle, if the Child lock is activated it automatically powers off the machine.
on the other hand, What are the symbols on washing machine?
Symbols on Washing Machine Detergent Drawers
- I= pre wash.
- II= main wash.
- Flower symbol= fabric softener.
also, Why is my Samsung Washer not starting? To fix a Samsung washer that won’t start or stop, check for a malfunctioning door lock, thermal fuse, or line fuse. Also, look for a defective display board, inadequate main control or logic board, broken power cord, clogged debris filter, kinked hoses, or an imbalanced wash load.
How do I turn off the child lock on my Samsung washer?
Child Lock
To deactivate the lock, push and hold the “Spin” and “Soil Level” buttons for six seconds. The “Child Lock” light will go out. To reactive the child lock, press and hold the “Signal” and “Soil Level” buttons for three seconds. The “Child Lock” light illuminates.
What is CL on washing machine?
When the child lock is activated, there will either be a key symbol or a “CL” symbol in the display and all the washing machine buttons will be disabled. To deactivate the child lock, press and hold the start button for three to five seconds.
What does the code DC mean on my Samsung washer?
By Lyle Weischwill. A dc error code on your Samsung front-load washer means the washer won’t spin because the load is unbalanced. Fixing a dc error code can be as easy as redistributing an unbalanced load or adding a few garments to a small or single-item load.
Does Laundry Detergent go in 1 or 2?
The detergent for the main cycle goes into the slot marked “II” (or 2). This is the most frequently-used slot. The amount of detergent you put in it depends on how dirty your laundry is. You can read the dosage on the detergent packaging.
What does 40 mean in laundry symbols?
If there is a number inside the basin, that is the maximum water temperature (in Celsius) that you should use to wash the item. A label that says 30 means a water temperature of 86 degrees Fahrenheit, 40 means 104 degrees Fahrenheit, 60 means 140 degrees Fahrenheit and 95 means 203 degrees Fahrenheit.
What’s the symbol for no fabric softener?
There is currently no symbol for fabric softener; it’s better not to use fabric softener at all. Fabric softener is a liquid chemical added to the washing machine to penetrate and soften fibers.
Is there a reset button on a Samsung washing machine?
To reset your Samsung washing machine you need to simply disconnect the washing machine from power for 5 to 10 minutes. … Some machines have a button you push to reset its motor. On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it.
How do I reset my Samsung washer?
Reset your washing machine
Resetting your washing machine is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.
Why is my washing machine not turning on?
Power Source
Make sure the machine is tightly plugged in. Next, check for a tripped circuit breaker. Reset the breaker and try to start the washer. If neither is at fault, you may have a damaged power cord.
How do I turn off child lock?
- You can activate the CHILD LOCK function by pressing the STOP button for more than 5 seconds. The key symbol will light up in the front panel display.
- To cancel, press the STOP button for more than 5 seconds so that the key symbol disappears from the front panel display.
How do I unlock my Samsung Bubble Wash?
- Press the Start/Pause button to unlock the door.
- Open the door, then add or remove laundry.
- After closing the door, press the Start/Pause button to restart the wash. To change a cycle, you may tap the Pause button and then change the cycle.
How do I unlock my Samsung Eco Bubble?
The washing machine door will be locked when it detects water in the unit. Wait and see if it drains out by itself. When water is no longer in the washer, reset the washer by pressing the ON/OFF or START/PAUSE button. Then wait for a minute to pass, and you can then unlock the door.
How do I turn off CL?
Once LG is powered ON, go to the right touch-screen panel, press and hold “Pre-wash + Delay wash” buttons simultaneously for 3-5 seconds. This will turn OFF the CL (control lock/child lock). You’ll hear a little jingle when the function is processed.
What are the 3 compartments in a washing machine drawer?
1 Main wash compartment: Detergent for the main wash, water softener, pre-soaking agent, bleach and stain remover. 2 Softener compartment: Fabric softener (do not fill higher than the line indicated by MAX). 3 Prewash compartment: Detergent for prewash or starch.
Why is my Samsung washer always unbalanced?
The drum is overloaded or underloaded. If you wash your laundry at a temperature of more than 60 degrees, some extra water enters the washer during the rinse cycle. This may lead to a slight imbalance. … If the bearings are worn or rusty or the shaft is bent, the vibration increases and the washer may not spin at all.
Is there a reset button on my Samsung washer?
To reset your Samsung washing machine you need to simply disconnect the washing machine from power for 5 to 10 minutes. … Once the 5 to 10 minutes has passed, connect power to your Samsung washer and run a test wash load to see if the error code has cleared.
What happens if you put fabric softener in the wrong slot?
Putting it in where laundry detergent normally goes will mean the softener is instead dispensed in the wash cycle. If that’s all you put in, you’re not putting in any detergent, so the wash cycle is just acting as a long rinse.
Why is the softener not emptying?
Check for Clogged Dispenser
Fabric softener can get clogged in an automatic dispenser’s drain holes, keeping it from draining. Remove the dispenser from your washer. … Before inserting the dispenser back into your washer, fill it completely with water to test its cleanness. Once filled, water should begin to empty out.
Where do you put vinegar in a washing machine?
When washing your clothing, add 1/2 cup of vinegar to the fabric softener compartment just before the last rinse cycle. If you’d like your clothes to have a mild scent, add four or five drops of essential oil into the fabric softener compartment.
Don’t forget to share the post !
