The Samsung SmartThings app lets you control your TV no matter where you are. Connect your phone to your TV, and then navigate to the SmartThings app. Select your TV from the list of available devices. From there, you can use the remote control features.
Likewise, Can you use any TV remote on any TV?
A Universal TV remote will work with any device model for almost all manufacturers and may be compatible with multiple devices. A remote control app is also a good option as they are available from most manufacturers and can be operated via a smartphone or tablet.
Also, How can I turn my Samsung TV on without the remote?
How to Control a Samsung TV without a Remote
- 1 Open the. SmartThings apps on your phone.
- 2 Select the TV your device is connected to.
- 3 Tap on Remote.
- 4 Choose between the 4D-pad, CH, 123 & Options and begin controlling your TV from your smartphone.
Moreover, What do I do if I lost my TV remote?
Here are a few common suggestions on what you can do to make sure you don’t lose your remote control again:
- Use a string to tie it to your couch.
- Put Velcro on the back and stick it to a designated place on your couch.
- Always put the remote control down on the same, designated place.
How do you program a universal remote without a TV?
Press and hold the “Program” button on your remote. Note that this button may also be titled “Prog” or “Setup.” Wait for a signal that your remote is ready to be programmed, such as a light glowing solidly or buttons flashing. (The specific signal can be found in your remote manual.)
How can I use my TV without a remote?
So How to Turn on The TV Without a Remote Control? Most TVs have the power button (joystick) located just underneath the screen, in the middle, right or left side. When you locate the button, just push and hold it for one second to power on your TV. If you want to power off your TV, use the same button.
Where is the menu button on my Samsung Smart TV remote?
Access the Settings menu
Press the Home button. From the Home screen, use the directional pad on your TV remote to navigate to and select Settings. From here, select and adjust your desired options.
How do I turn my TV on without a remote?
To turn on your TV without the remote, just walk over to the TV and hit the power button.
- Read through any manuals that came with your television if you still have them.
- Check if your TV has a visible touch power button. …
- Check the the left and right sides and the top of your TV, some TVs have power buttons there.
How do I get my Samsung Smart TV remote to work?
Using the On-Screen Remote
Press the MENU/123 button on the Samsung Smart Control to display the On-Screen Remote on the TV’s screen. Use the On-Screen Remote to enter numbers and control content playback. Select buttons on the top of the screen to use the features and functions of the TV, just like a real remote.
How do you pair a remote to a TV?
Press the (Quick Settings) button on the remote control. Select Settings.
…
The next steps will depend on your TV menu options:
- Select Remotes & Accessories — Remote control — Connect via Bluetooth or Activate button.
- Select Remote control — Connect via Bluetooth.
- Select Voice Remote Control — Activate button.
How do I get a new remote for my TV?
How to Replace TV Remote Controls
- Call the TV manufacturer. The number can be obtained from your television manual or from the Internet. …
- Buy a universal remote. Most electronics stores sell what are known as universal remote controls. …
- See what you can find for free.
How do I turn my TV on without a remote?
So How to Turn on The TV Without a Remote Control? Most TVs have the power button (joystick) located just underneath the screen, in the middle, right or left side. When you locate the button, just push and hold it for one second to power on your TV. If you want to power off your TV, use the same button.
How do I turn my Samsung TV on without the remote?
When facing the TV, certain models have the TV Controller on back of the TV in the bottom right corner. The control stick toggles up and down as well as side to side – the menu options will appear on the TV screen when you press the center button. Long press the center button to turn the TV on or off.
What is the 4 digit code for a Samsung TV?
The generic PIN for Samsung TVs is 0000 – or four zeros.
How do you program a universal remote to a Samsung TV?
Method 1:
- Switch on your Samsung TV set.
- Hold your Universal Remote to face the set.
- Press the ‘PROG’ button and hold until the LED light on your remote lights up, then press on to the ‘INFO’ button.
- The LED light should continue to blink – then get the code you need from myuniversalremotecodes.com and enter it in.
How can I control my Smart TV without a remote?
When facing the TV, certain models have the TV Controller situated under the front panel on the middle or right-hand side. Single press the button to bring up the menu. Then, single press the button to move along the menu. Long press the center button to make your selection.
How do I change the source on my Samsung TV without the remote?
Using the Control Stick
The first location is on the back of the TV, in the bottom-left corner. You can use the middle button to display the menu options on the screen as you would with a remote. Use other controls to navigate the menu options screen. Find the input change option and change the input to HDMI.
Where is the menu button on my TV remote?
Using the TV Menu Bar
- Press the TV button while watching a TV broadcast. The TV Menu Bar is displayed at the bottom of the screen.
- Move the focus up or down to select the desired category.
- Move the focus left or right to select the desired item.
- Press the (Enter) button to launch the selected item.
How do I get to the Samsung hidden menu?
If you’d like to try it out, enabling it is rather simple: Head over to settings within the Gallery app and open About Gallery. Now repeatedly tap on the version number until you see a toast that reads [Labs] Gallery labs is enabled. You’ll now find the now-not-so-secret menu in the app’s settings menu.
Where are the buttons on a Samsung TV?
The TV controller located under the front panel has varied layouts. For TVs with a TV controller in the middle, there is either a five-button or single-button design. The five-button layout will have a center, up/down, and left/right buttons.
How do I reset my Samsung Smart TV without a remote?
To reset a TV without a remote, first, you need to unplug the power cord from it, and then locate and press the ‘Power’ button and ‘Volume Down’ button on the TV at the same time. Without leaving these buttons, you need to plug the cord back in it.
What is the source button on Samsung TV remote?
Grab your remote and hit the “Home” key. Doing this will bring up a menu bar that usually runs along the bottom of the screen. On the menu, scroll left until you get to the word “Source”. Select “Source” and it takes you to the input screen.
How do you pair a Samsung remote to a TV?
Here’s how you can pair up your Samsung Smart TV with your Smart remote:
- Flip the remote. Take the remote and turn it to the other side. …
- Locate the down arrow. …
- Insert batteries. …
- Aim the IR sensor. …
- Press any button. …
- Wait for pairing to finish. …
- Press the Return and Extra buttons simultaneously. …
- Wait for pairing to finish.
Why is my TV not responding to my remote?
A remote control that will not respond or control your TV usually means low batteries. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.
Why is my Samsung TV not responding to the remote?
There are a number of reasons why your remote may not be working. The most common are physical damage, battery issues, pairing issues, or issues with the infrared sensor on the remote or TV. … If it seems like it’s pressing buttons by itself, it may actually be that your TV’s controls are dirty.