Blue wire generally refers to a type of wire or cable that is added to a hardware product at a factory in order to resolve design problems. Blue wires are also known as bodge wires in British English.
Table of Contents
READ ALSO
Likewise, Which wire is positive when both are black?
If the multi-colored wire is black and red, the black wire is the negative wire, while the red one is positive. If both wires are black but one has a white stripe, the striped wire is negative, while the plain black wire is positive. Look in the owner manual to determine which wires are negative in a car.
Also, Is blue wire positive or negative?
Yellow is positive, blue is negative.
Moreover, Is blue wire ground?
Other Colored Wires
These are the most common colors used in electrical wiring. … Blue and yellow wires are sometimes used as hot wires and as travelers, green wires (and bare copper wires) are ground wires, and white and gray wires are neutral.
Does blue wire go to black or red?
The blue wire from the ceiling fan gets connected to the second live wire from the ceiling. This second wire can vary in color but is most commonly red or black. This connection allows you to power your lights from the second switch.
What if I have two black wires?
You will get a reading if one wire is hot and the other isn’t. However, if both wires are hot, the reading will be zero. … However, if you need to rewire a light switch or a plug socket, you may occasionally come across two black wires. It’s essential that you determine which black wire is hot before proceeding.
Why do I have 2 black wires and 2 white wires?
the black and white wires from the power supply side need to be attached to the line side of the new outlet. (it should say this on the back of the new outlet) and the other 2 are to be attached to the Load side of the outlet.
Which wire is live when both are same color?
Identify the neutral wire in the fixture by looking at the wires. In most modern fixtures the neutral wire will be white and the hot wire is red or black. In some types of fixtures, both wires will be the same color. In this case, the neutral wire is always identified by some means.
Can I connect black wire to blue wire?
The black and blue wires need to be connected. You will be able to control your fan and lights with a single switch. You should twist the black and blue wires the same way you did the previous wires.
Which wire does the blue wire go to?
Blue wire is for the light, if light is included with the fan. White wire is neutral. Green wire is for the ground. Red wire is sometimes included and acts as a conductor to carry power to the light kit.
Is blue and black wire same?
A blue wire may be connected to a negative terminal of the power source. A blue wire should be connected to a positive terminal and a black wire should be connected to a negative terminal in a two wire system. …
What is blue electrical wire used for?
Blue wires are mostly used as travelers in three or four-way switches, for example, switches at the bottom and top of a staircase controlling the same light (three-way). When white wires are covered with black or red tape, they are hot wires. Green wires are used to ground electrical circuits.
What does a GREY wire mean?
White or gray wires indicate neutral charged wires. However, neutral wires may carry power and pose a danger of electrocution if not handled properly. White and gray wires carry power back to the service panel. Both hot and neutral wires have the potential to shock and injure you if not handled properly.
What color wires go together for a ceiling light?
Blue wire is for the light, if light is included with the fan. White wire is neutral. Green wire is for the ground. Red wire is sometimes included and acts as a conductor to carry power to the light kit.
Does blue wire go to white or black?
Black wire is for the fan. Blue wire is for the light, if light is included with the fan. White wire is neutral.
Does blue and black wire go together?
Why Yes; you can connect if both wire are to be use for same purpose, that is if the black wire is use for neutral and you intend to use the blue wire for neutral you can connect.
Why would an outlet have 2 hot wires?
The reason for multiple hot/neutral wires for one outlet is that the outlets are daisy-chained together. This means hot/neutral is only coming from one of the wires and it is being sent to the other wire.
Why is there 2 black wires on light switch?
The bare or green-wrapped ground wires serve as a backup to divert the power safely away in case of an electrical fault. In most cases, two black wires will be attached to the switch’s two terminal screws. … The ground wires will be connected to each other and attached to the grounding screw on the switch.
What happens if you mix up hot and neutral wires?
This happens when the hot and neutral wires get flipped around at an outlet, or upstream from an outlet. Reversed polarity creates a potential shock hazard, but it’s usually an easy repair.
What if I have two white wires?
You likely have a switch loop. You should find which one is hot when the switch is on (mark it black with electrical taps) and connect that one to the black wire of the fixture. The other white should connect to the white of the fixture. The ground should be connected to the bare wires (ground) in the box.
How do you wire a light fixture with 2 black and 2 white wires?
Connect the two white wires from the light fixture to the white wire located in the electrical box by twisting an orange wire nut onto all three wires. Connect the two black wires from the light fixture to the black wire from the electrical box the same way you connected the white wires.
How can I tell which wire is hot without color?
You may see a stripe on one of the wires. If so, that wire is neutral. If the plastic is clear, the wires in the neutral side are silver while those in the hot side are copper. After determining the polarity, connect the hot wire to the black circuit wire and the neutral wire to the white circuit wire.
Why are there 2 black wires on light switch?
The bare or green-wrapped ground wires serve as a backup to divert the power safely away in case of an electrical fault. In most cases, two black wires will be attached to the switch’s two terminal screws. … The ground wires will be connected to each other and attached to the grounding screw on the switch.
