Blue wire generally refers to a type of wire or cable that is added to a hardware product at a factory in order to resolve design problems. Blue wires are also known as bodge wires in British English.
similarly, Which wire is hot if both are black?
Here’s a rundown of electrical wires: The black wire is the “hot” wire, which carries the electricity from the breaker panel into the switch or light source. The white wire is the “neutral” wire, which takes any unused electricity and current and sends them back to the breaker panel.
on the other hand, Is blue wire ground?
Other Colored Wires
These are the most common colors used in electrical wiring. … Blue and yellow wires are sometimes used as hot wires and as travelers, green wires (and bare copper wires) are ground wires, and white and gray wires are neutral.
also, Is blue wire positive or negative? Yellow is positive, blue is negative.
Does blue wire go to black or red?
The blue wire from the ceiling fan gets connected to the second live wire from the ceiling. This second wire can vary in color but is most commonly red or black. This connection allows you to power your lights from the second switch.
What if I have two black wires?
You will get a reading if one wire is hot and the other isn’t. However, if both wires are hot, the reading will be zero. … However, if you need to rewire a light switch or a plug socket, you may occasionally come across two black wires. It’s essential that you determine which black wire is hot before proceeding.
Why do I have 2 black wires and 2 white wires?
the black and white wires from the power supply side need to be attached to the line side of the new outlet. (it should say this on the back of the new outlet) and the other 2 are to be attached to the Load side of the outlet.
What happens if you mix up hot and neutral wires?
This happens when the hot and neutral wires get flipped around at an outlet, or upstream from an outlet. Reversed polarity creates a potential shock hazard, but it’s usually an easy repair.
Do I connect the blue wire to the black wire?
Why Yes; you can connect if both wire are to be use for same purpose, that is if the black wire is use for neutral and you intend to use the blue wire for neutral you can connect.
Can a white wire be hot?
The term “hot” is used for source wires that carry power from the electric service panel to a destination, such as a light or an outlet. Even though you are permitted to use a white wire as a hot wire by marking it with electrical tape, the opposite is not recommended or allowed.
What is a blue wire on a light switch?
The blue wire is known as the Switched Live and takes power to the light. Switched Live is only live when the switch is on (this is where it gets its name from).
What wire does the blue wire connect to?
Blue wire is for the light, if light is included with the fan. White wire is neutral. Green wire is for the ground. Red wire is sometimes included and acts as a conductor to carry power to the light kit.
Can I connect black wire to blue wire?
The black and blue wires need to be connected. You will be able to control your fan and lights with a single switch. You should twist the black and blue wires the same way you did the previous wires.
Is blue and black wire same?
A blue wire may be connected to a negative terminal of the power source. A blue wire should be connected to a positive terminal and a black wire should be connected to a negative terminal in a two wire system. …
Does blue wire go to black or white?
Black wire is for the fan. Blue wire is for the light, if light is included with the fan. White wire is neutral.
Does black connect to blue wire?
The black and blue wires need to be connected. … You will be able to control your fan and lights with a single switch. You should twist the black and blue wires the same way you did the previous wires.
Can red and black wires go together?
If the red and black wires are connected together already and energized, yes you can do that but you will need a pull chain light or a remote control, if they are not switch controlled.
Can you connect 2 black wires together?
Just go ahead and connect the new dimmer the same way. This is the typical way to connect a switch. The 2 blacks connected are “power in, power out” to the next switch in the circuit.
Why does my light switch have 3 black wires?
If the light turns on, the second black wire you connected to the switch is the switch feed and the unconnected black wire is the feed to the other loads. If the light doesn’t turn on, then it’s the other way around: the connected wire feeds the other loads and the disconnected wire is the light feed.
What if I have two white wires?
You likely have a switch loop. You should find which one is hot when the switch is on (mark it black with electrical taps) and connect that one to the black wire of the fixture. The other white should connect to the white of the fixture. The ground should be connected to the bare wires (ground) in the box.
Can you connect black and white wires together?
A single black and white connected together is normal. It is part of a switch loop. A black connected to a group of whites is not normal and probably should be connected to the other blacks. It is normal to have a white connected to a group of blacks if a switch loop is used.
Why would an outlet have 2 hot wires?
An outlet may have two hot wires so that one wire may function as an ‘always on’ transmutation from the power supply, feeding the other wire. The other hot wire would transmute that voltage to another device or series of devices.
What happens if you wire light backwards?
Tip. The fixture still works if you reverse the wires, but the socket sleeve will be hot, and anyone who touches it while changing a bulb can get a shock. When wired correctly, the socket sleeve is neutral and only the small metal tab at the base of the socket is hot.
What happens if an outlet is wired backwards?
If your outlet’s polarity is reversed, it means that the neutral wire is connected to where the hot wire is supposed to be. This may not sound like a terrible thing, but it is. There is always electricity flowing out of an outlet with reversed polarity, even if an appliance is supposed to be off.
What happens if you connect the wrong electrical wires?
But here’s the catch: If you connect the circuit wires to the wrong terminals on an outlet, the outlet will still work but the polarity will be backward. When this happens, a lamp, for example, will have its bulb socket sleeve energized rather than the little tab inside the socket.
Don’t forget to share the post !