Error code 722 indicates that your DIRECTV receiver may not have the programming information for the channel you’re trying to view.
Table of Contents
READ ALSO
similarly, How do I refresh my satellite receiver?
How to reset your receiver
- Unplug the power cord from the back of the receiver.
- Leave it unplugged for 30 seconds, then plug it back in.
- The receiver should boot up properly in less than 90 seconds, with lights flashing in front.
on the other hand, What is DIRECTV signal 771 loss?
If you see error code 771, it means your DIRECTV receiver is having trouble communicating with your satellite dish.
also, What does code 721 mean on DIRECTV? DIRECTV Error Code 721
If you see code 721 – “channel not purchased” it can mean two things: Either that channel is not part of your programming package, or your service just needs to be refreshed. Here you’ll learn how to troubleshoot code 721 without having to call customer service.
What does DIRECTV code 727 mean?
This error indicates that the sports program you’re trying to watch is blacked out in your area.
Why is my satellite receiver not working?
To reset your receiver: Unplug the receiver’s power cord from the back of the receiver or from the wall outlet. Leave unplugged for 30 seconds and plug back in. The receiver should boot up properly in less than 90 seconds.
How do I reset my satellite dish?
A hard reset is easy to perform and can be done two ways:
- Unplug your receiver. Find the power cord coming from your DISH Network receiver. …
- Press and hold the power button or press the reset button. On the left side of your receiver is a power button.
Why do I keep losing my satellite signal?
This issue is usually a result of the satellite dish being in a slightly wrong position, damaged or malfunctioning equipment, severe weather, or something blocking the dish’s view of the sky. Your signal strength can affect the delivery of your live programming, though with a DVR you can still access recorded content.
How do I fix my satellite signal?
Satellite reception problems
- Cables. Check all the cables between your TV equipment and satellite dish are connected securely. …
- Reboot. Unplug your receiver from the mains and leave for 10 minutes. …
- Dish has moved. …
- Dish Installation. …
- Obstructions. …
- Heavy Rain. …
- Snow.
How do I get signal on my DirecTV satellite?
To access the Signal Meters menu:
- Press the menu button on your remote.
- Select Settings and Help on the left hand menu.
- Select Settings.
- Select Satellite on the left hand menu.
- Select View Signal Strength on the bottom right-hand screen (scroll to it using the arrows on your remote).
How do I fix Error 721 on DIRECTV?
STEP 1: Unplug your receiver’s power cord from the electrical outlet, wait for 15 seconds, and plug it back in. STEP 2: Press the Power button on the front panel of your receiver. Wait for your receiver to reboot. STEP 3: Go to My Equipment to refresh your receiver again.
What does code 775 on DIRECTV mean?
You’ll see DIRECTV error code 775 when the signal between your receiver and satellite dish is interrupted. Check your receiver connections to resolve this issue.
What does Error Code 5 mean on DirecTV?
Error code 5
Alternatively: Ensure the receiver has enough power supply. Reset your DirecTV receiver.
What does 711 mean on DirecTV?
DIRECTV error code 711 indicates that your receiver may need to be activated, or your service refreshed.
What does Error Code 4 mean on DirecTV?
776 Messages. I haven’t seen this error in a long time, before I went to Genie equipment. If I remember correctly, there could be several reasons for it. Basically it means that your OnDemand program attempted to download a show got prematurely stopped and attempted to play the file.
Why does my satellite Say no signal?
The signal being received may be weak. … The antenna may need to be adjusted to improve the signal quality. If using cable or satellite, make sure the connection to the back of the TV is secure. Then contact your service provider for further assistance in improving the signal strength.
How do I get a signal on my satellite dish?
- To find your signal strength on a Hopper or Wally receiver, go to Menu > Settings > Diagnostics > Dish.
- To find your signal strength on a ViP receiver, go to Menu > System Setup > Installation > Point Dish.
How do I fix no satellite signal being received?
“No Satellite Signal” – What to do
You need to either remove the power cord or turn off the power at the wall, wait ten seconds and then turn it on again. The box can take up to two minutes to fully initialise again so don’t keep trying to turn it on repeatedly during this time, you may extend the restart process.
How do I reboot my Dish TV?
Reset your DISH receiver
Unplug the power cord of your DISH receiver (typically has a red tag) from the electrical outlet for 10 seconds, then plug it back in. If you have a Hopper & Joey system, unplug the power cord of the Hopper (the main, large receiver). The reset process may take up to 5 minutes to complete.
How do I reconnect my directv satellite?
Connect your satellite receiver to the TV as specified in the receiver’s manual.
- Connect 1 end of a coaxial cable to the satellite receiver through the jack labeled “OUT TO TV.” Connect the other end to the antenna’s “IN” jack on the television.
- Connect both the television and satellite receiver to a power outlet.
How do I fix no satellite signal?
“No Satellite Signal” – What to do
You need to either remove the power cord or turn off the power at the wall, wait ten seconds and then turn it on again. The box can take up to two minutes to fully initialise again so don’t keep trying to turn it on repeatedly during this time, you may extend the restart process.
How do I test my satellite signal?
How to Test Satellite TV Signal Strength
- Ensure the satellite dish is connected to the included satellite receiver box. …
- Connect the satellite receiver box to your television. …
- Ensure that both the satellite receiver and television are powered on. …
- Select the “Signal Meter Screen” option from the receiver menu.
How do I adjust my satellite dish?
To set azimuth:
- Use a compass to find the correct angle and move the plumb mast (the pole on which the dish is mounted) until the dish is pointing at that angle.
- Check your signal strength: anything over 40 is a good signal. …
- Tighten all hardware.
How do I reset my DirecTV remote control?
If that didn’t help, try resetting the remote to its default factory settings:
- Press and hold MUTE and SELECT together until the light flashes three times.
- Press 9, 8, 1 and SELECT. The remote flashes four times and should now reset.
Don’t forget to share the post !
