What does Error Code Le mean on Samsung washer?

Samsung washing machine error code LE means the washer has tried to fill but has not reached the proper water level. Check the water supply valves are fully opened.

Likewise, What does LC code mean on Samsung washer?

An LC error code indicates a leak. The leakage sensor, which is located in the lower pan, detects moisture, and informs the control module about the probable “flooding.” When this happens, the protective system is automatically triggered.

Also, How do you fix UC error on Samsung washer?

How to fix the problem

1. Disconnect the appliance by pressing the appropriate button and taking the cord out of the socket;
2. Wait 5 minutes;
3. Plugin and restart the washing machine.

Moreover, Why does my Samsung washer keep saying IE?

Is there an error message 1E or 1C on the display of your Samsung washing machine? If so, there is a problem with the water level sensor. This means that the water pressure or water level is not correct.

Why does my Samsung washer say 4E?

The 4E (4C) error code indicates that the washing machine has detected a problem with the water supply. The most common reason for this error is a blocked or kinked water supply hose.

Why does my washer say LC?

If the control lock has been activated, the control will not function. If you try to push buttons, you may see the code “LoC” or “LC” (depending on your model). This is a reminder that you have set the control lock, and need to de-activate it to allow the washer controls to function.

What are the symbols on my Samsung washing machine?

An icon displays on Samsung washing machine

• Garment + The t-shirt with a + icon indicates you can pause the cycle to add more clothing. …
• Child Lock. The smiley face icon indicates Child Lock is turned on. …
• Delay Start. …
• Door Lock. …
• Time Remaining. …
• Signal Off. …
• Pure Cycle or Self Clean. …
• Extra Rinse.

Where is reset button on Samsung dishwasher?

Unlike their other appliances, Samsung dishwashers tend not to have a reset button or functionally.

How do I fix the error code SC on my Samsung washer?

Error code SC (5C) is caused only by large obstacles: accumulations of lint, clothing pieces, etc. Remove them, wash the filter and reinstall.

How do I reset my washing machine?

To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.

Why is my Samsung washer not spinning?

If your Samsung washing machine does not spin fully or at all during the rinsing or spinning phase of the cycle it is most likely to be caused by an unbalanced load. … 1 Open the door and redistribute the washing more evenly around the drum. 2 Check that the drum is not over or under loaded.

How do you reset a Samsung washer?

Resetting your washing machine is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.

How do I clear IE code on Samsung washer?

Samsung washing machine IE error – Possible solutions

You need to unplug your Samsung washing machine for about 5 minutes as this will normally reset most of the electronic glitches or any other issues with software that may be present. Make sure that you leave it unplugged for several minutes.

How do I fix error code 4E?

If you face with the 4E error code for the first time, try to reboot the electronic unit. Turn off the machine for a couple of minutes from the network. After this, the glitch of the control module will disappear. If the fault reset doesn’t occur and the 4E continues to light up, start checking the washer hardware.

How do I fix 4E error on my Samsung dishwasher?

Samsung 4e error code dishwasher

1. Check the water supply to make sure that everything is OK with the valve. Measure the pressure as its low value may cause the error code 4E.
2. Power off the appliance and make sure that the supply valves are open. …
3. Inspect the hoses connected to the tap.

How do I fix E4 on my washing machine?

When the washing machine shows error E4, the washing machine doesn’t get water or too little water to run the program. First, check whether the faucet is open properly. If it’s open, check the water supply. The drain hose may be clogged or kinked.

What does 4C mean on a Samsung washing machine?

The 4E (4C) error indicates that the washing machine has detected that there is a problem with the water supply. The most common reason for this error is a blocked or kinked water supply hose.

What does an LC LE error indicate?

Leakage error

LC, LE – The dishwasher’s leak sensor detects moisture or the water reflector is blocked (Waterwall models only). When this code occurs, the dishwasher will turn itself on and will not turn off.

How dO I reset my Samsung washing machine?

Resetting your washing machine is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.

What are the symbols on washing machine?

Symbols on Washing Machine Detergent Drawers

• I= pre wash.
• II= main wash.
• Flower symbol= fabric softener.

What do the symbols mean on washing machine?

If the garment is machine washable, then you’ll either see dots or numbers inside the bucket symbol, representing the recommended maximum temperature: one dot means 30 °C (meaning that you have to wash your clothing in cold water), two dots 40 °C (warm water), and four dots 60 °C.

How do I reset the code on my Samsung dishwasher?

What does LE error code mean and how to remove it? It is a leak error. When it appears on the scoreboard, protection is activated and the equipment stops working. Try rebooting: close the shut-off valve, unplug the machine for 5 – 10 minutes, and then restart it.

Why will my Samsung dishwasher not start?

Your dishwasher will not begin a wash cycle if the door latch isn’t engaged. For the dishwasher to start, make sure the door is fully closed and the latch is enabled. A broken door latch can also be responsible for a Samsung dishwasher not starting. … When this happens the latch must be replaced.

How do you bypass the LC code on a Samsung dishwasher?

Quick answer: The LC flashing on your Samsung dishwasher indicates that the leak sensor in the dishwasher detects a water leak or moisture. To clear the error code LC, simply remove power to the dishwasher for 15 minutes. This should reset the dishwasher and clear the error code.