The manufacturer has assigned this error or fault code to indicate that the washing machine drain cycle is taking too long. After 8 minutes of drain time the error code is displayed. Press PAUSE/CANCEL twice to clear the display. If the error code returns, check to be sure the drain hose isn’t clogged or kinked.
Likewise, Why does my washer say F?
The F indicates that the washer control detected a component problem. If the F code was caused by excessive suds preventing the washer from draining, you may be able to shut the door and run a drain/spin cycle to remove the water from the washer.
Also, Can you reset a Maytag washing machine?
If an error message causes your Maytag washer to not run properly, reset the washer to clear the error message. You also can reset the washer if you want to cancel a setting you chose.
Moreover, What are the codes for a Maytag washer?
Error Codes in your Maytag Top Load Washer:
| Error code | Error |
|---|---|
| Ofb | The washer load is out of balance. |
| OL | The washer load too large. |
| PF | The wash cycle was interrupted by a power failure. |
| Sud | There are excessive suds in washer. |
• 16 juin 2020
What does the Code F mean on a Whirlpool washer?
The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen. When the door fails to lock, the machine won’t run at all.
How dO you reset the code on a Whirlpool washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
What does F code mean?
FCODE
| Acronym | Definition |
|---|---|
| FCODE | Forth Code (electrical engineering) |
How do you bypass the clean cycle on a Maytag washer?
Hello Sandy, Press and hold the “Spin” and “Soil” button simultaneously for 10 seconds. A countdown will be displayed on the console. Once the countdown has completed the unit will have successfully reset.
Why does my Maytag washer not start?
If your Maytag washing machine isn’t starting, verify that the power cord is connected to a live outlet. Test the outlet with another three-prong appliance. … Select a wash setting and pull out the knob to start the cycle. If it still won’t start, reset the circuit breaker or change out the fuses if they are blown.
How do I reset my Maytag mvwx655dw1 washer?
Be sure the washer is in standby mode (plugged in with all indicators off). Perform the following sequence of movement using the cycle selector knob. NOTE: AFTER RESET, sequence “A” through “E” must be completed within 6 seconds. RESET – Rotate cycle selector knob counterclockwise one or more clicks to clear sequence.
What does the code CL mean on a Maytag washer?
Does the washer need to be cleaned? The CL code is a reminder to run the Clean Washer cycle and will appear after 30 cycles. The code will automatically clear once a Clean Washer cycle has completed or after three cycles.
Is there a recall on Maytag washers?
Important: CPSC Recall Remedy Notice Due to COVID-19
Description: The recall involves white Maytag front-load washers with model number MAH9700 and a serial number from 10188468GA through 11683946GJ. The model and serial numbers are located inside the door opening and below the rubber boot.
What does F5 and E3 mean on a washing machine?
The F5 E3 alert indicates there is issue with the lid lock. … Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.
Why does my washer say F 21?
If you see error code F21 on your Whirlpool washing machine, this refers to a water drain problem. The washer won’t be able to finish the cycle and your laundry will be wet. This error code means draining is taking too long, and something is wrong with the water pumping.
What does it mean when a washer says F1?
When the Whirlpool Cabrio displays an F1 error, this means the the control board is having difficulty communicating with the motor. To fix your F1 error, you can first try to unplug your washing machine for 15 minutes and then plug it back in.
What does E dL mean on a washing machine?
E:dL – Door Lock Error – Open and close door. Check door lock and switches. E:dO – Door Open During Running Cycle – Make sure door is properly closed. Check door lock and switches for defects. E:dr – Drain Error – Maximum drain time exceeded or water is still being detected at end of spin cycle.
How do I fix the code on my Whirlpool washer?
To remove the error display, press Power once. Then press Power again to restart the washer.
…
If pressing Power does not work:
- Unplug the washer or disconnect the power for one minute.
- Plug in the washer or reconnect the power.
- Re-select the cycle and press Start.
What is the problem with Whirlpool washing machines?
The machines, branded as Hotpoint or Indesit, were sold for more than five years, but their door locking system can overheat creating the risk of fire. Owners face the prospect of doing without hot washes for months until products are fixed or replaced.
What is the power wash setting on Maytag washer?
PowerWash® Cycle – The PowerWash® cycle features a combination of more wash action and heated water to drive powerful cleaning. PowerWash® Agitator – The PowerWash® agitator tackles any load size with both efficient, concentrated cleaning to fight stubborn stains and robust wash action to help break up messes.
How long is the normal cycle on a Maytag washer?
Best answer: The washer takes anywhere from 45 minutes to an hour to complete a cycle using the Normal Wash Cycle. Some other factors to consider is how long the machine takes to fill to do the laundry in the Normal Wash cycle and how much water pressure you have coming to the machine.
Why does my Maytag washer smell?
Wet laundry that sits in the Maytag washer for long periods may cause the machine to smell. Fungus and mildew thrive in moist environments; the dark, dank tub of wet laundry becomes the ideal breeding ground for bacteria and odors.
How do you fix a washer that won’t start?
How to Fix a Washing Machine That Won’t Start
- Activate the power button.
- Test the outlet.
- Reset outlet if necessary.
- Make sure the power cord is plugged in.
- Check if fuses are blown or the circuit breaker is thrown.
- See if Delay Start has been pushed.
- See if Control Lock has been activated.
Why is my Maytag washer not filling up with water?
If the water inlet valve is defective, the wash may fill slowly or not fill at all. … If the water pressure is adequate, try cleaning the screens inside the water inlet valve hose connection ports. If the washer still fills slowly, replace the water inlet valve.
