The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area. Also verify there are no clothing items in the way.
Table of Contents
READ ALSO
Likewise, What does F5 and E3 mean on a washing machine?
The F5 E3 alert indicates there is issue with the lid lock. … Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.
Also, How do I fix E2 error on my Whirlpool washer?
F5 E2 Error Code
- Power unit down by turning off the circuit breaker or unplugging for one (1) minute.
- Power unit up by reconnecting power.
- Open and close the door.
- Restart a new cycle.
- Monitor the washer for one (1) minute to ensure the error code does not display again.
Moreover, What does E2 and F6 mean on Maytag washer?
The F6 E2 alert indicates there is issue with the appliance control unit, user interface or associated wiring. Unplug the washer, wait five minutes, then plug back in.
What does E2 mean on a Kenmore washer?
Dryers , Kenmore , Washers. 1 Answer from this member: The E2 error message indicates the control has detected a shorted thermistor. Most likely replacing the thermistor will fix this problem.
What does E3 mean on my washing machine?
The E3 error in Samsung washers means a drum overflow with water. The water level sensor sends a signal indicating that there is too much water in the drum. … The E3 error code indicates overfilling with water. That’s what this error, displayed on the washing machine, means.
How do I fix F5 E3 error on Maytag washer?
F5 E3 Error Code
- Power unit down by turning off the circuit breaker or unplugging for one (1) minute.
- Power unit up by reconnecting power.
- Restart a new cycle.
- Monitor the washer for one (1) minute to ensure the error code does not display again.
What does F5 mean on my washing machine?
The F5 error code indicates that the Central Control Unit (main machine control board) detects a temperature sensor resistance that is out of the normal range.
Do Whirlpool washers do E2?
The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area. Also verify there are no clothing items in the way. CLICK HERE to review a video for more information on the F5 E2 code.
What does E2 means on AC?
“E2” – Low Pressure: The pressure of the compressor is too low.
How do I reset my Whirlpool front load washer?
The first way you can reset whirlpool washer top load is by unplugging it for about 2 minutes then plug it back in and wait about 30 seconds before starting the washer again. This performs a hard reset on the machine and it will start over after you reconnect it again.
Is there a reset button on a Maytag washer?
Press “Start/Pause.” You have now reset your Maytag washer.
What do you do when your washing machine won’t turn on?
How to Fix a Washing Machine That Won’t Start
- Activate the power button.
- Test the outlet.
- Reset outlet if necessary.
- Make sure the power cord is plugged in.
- Check if fuses are blown or the circuit breaker is thrown.
- See if Delay Start has been pushed.
- See if Control Lock has been activated.
Why does my Maytag washer not start?
If your Maytag washing machine isn’t starting, verify that the power cord is connected to a live outlet. Test the outlet with another three-prong appliance. … Select a wash setting and pull out the knob to start the cycle. If it still won’t start, reset the circuit breaker or change out the fuses if they are blown.
What does E2 and F2 mean on a dishwasher?
Maytag Dishwasher F2 E2 Error Code Meaning
If this code appears on your dishwasher display, it means that there is a communication failure between the electronic control and the touchpad.
What does E2 mean on a dishwasher?
E2 – Abnormally long drain time. Check to make sure that the drain line is not obstructed or bent in a way that restricts water flow. Make sure the drain line is routed below the height of the dishwasher and that it has not been extended. This will inhibit the ability of the drain function to operate properly.
What does E2 mean on a dryer?
The Whirlpool Duet Dryer Error E2 means the control has detected that the thermistor is shorted. This error can be a wiring issue from the control to the thermistor or a bad thermistor. In some cases it can be a bad control reporting false errors but this is not common.
How do I fix E3 error on my washing machine?
5 Answers
- Unplug The Washing Machine: Unplug the washer for 2-3 minutes. …
- Check Wire Connections On Drive Motor: One fairly common issue that causes the 3E error code is connection problems. …
- Check Wire Connections On Control Board: …
- Check Hall Sensor:
What is E2 in automatic washing machine?
If the LED Lights are flashing with an E2, 5C or 5E error, it is an indication of water drainage issue. Water is not draining from the drum. To resolve the error issue, check the following: • Check drainage pump filter for blockages (e.g. lint, coins hair, clips)
What is F5 error code?
An F5 error code indicates that the fan on the outdoor or indoor unit has been running at a very low speed for a set period of time. This occurs when either the controller on the board or the fan malfunctions.
How do I know if my detergent is high efficiency?
Walk down the laundry detergent aisle in any store, and almost every single bottle, box, and the bag has a little symbol on the label: the letters “h” and “e” separated by a red dot on a field of blue surrounded by a white circle swirl. The HE stands for high-efficiency laundry detergent.
Why is my Whirlpool washer not draining?
If your washer’s drain hose is kinked or bent, the washer will not be able to drain properly. The drain hose may also be obstructed by a small article of clothing. Check your drain hose and remove any obstructions, and straighten it if it’s bent. Make sure the hose is placed less than eight feet above the floor.
What does F2 mean on a Whirlpool washer?
The F2 error code on the Whirlpool washer is indicated as F02, and means that the washer is taking too long to drain properly. This means there is come kind of problem with the washer’s draining system.
