The F5 error code indicates that the Central Control Unit (main machine control board) detects a temperature sensor resistance that is out of the normal range.
Table of Contents
READ ALSO
Likewise, What does F5 mean on a washer?
A temperature sensor resistance that is out of the normal range is detected by the Central Control Unit. A failed NTC temperature sensor is what causes the F5 error.
Also, What is F5 error code?
An F5 error code indicates that the fan on the outdoor or indoor unit has been running at a very low speed for a set period of time. This occurs when either the controller on the board or the fan malfunctions.
Moreover, What does F5 and E2 mean on a washing machine?
The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area. Also verify there are no clothing items in the way.
What does F5 and E3 mean on a washing machine?
The F5 E3 alert indicates there is issue with the lid lock. … Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.
How do I fix F5 error on washing machine?
Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute.
What does E2 error code?
If your air conditioning system displays an E2 error, it means there is an outdoor unit sensor error. You can detect a tiny LED light signaling this error on your air conditioner. This issue arises when the evaporation temperature is lower than the temperature under the cooling or dry mode.
What does E3 mean on AC?
E3 error code indicates a indoor fan speed malfunctioning which can be affiliated to a bad indoor circuit board or a bad indoor fan motor.
How do I clear the error code on my Maytag washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
How do I fix E2 error on my Whirlpool washer?
F5 E2 Error Code
- Power unit down by turning off the circuit breaker or unplugging for one (1) minute.
- Power unit up by reconnecting power.
- Open and close the door.
- Restart a new cycle.
- Monitor the washer for one (1) minute to ensure the error code does not display again.
What does E2 mean on my washing machine?
The E2 error in Samsung washing machines informs the user about water draining problems. For some reasons, the device can’t drain the waste of water. Besides, it can report about unhurried discharge. So waiting time for draining is exceeded.
How do I fix E3 error on my washing machine?
5 Answers
- Unplug The Washing Machine: Unplug the washer for 2-3 minutes. …
- Check Wire Connections On Drive Motor: One fairly common issue that causes the 3E error code is connection problems. …
- Check Wire Connections On Control Board: …
- Check Hall Sensor:
How do I fix E3 error on my Whirlpool washer?
If you receive an E3 Error code, your washer may be unbalanced. This could be caused by the washer being too tightly packed, or clothing not distributed evenly. This will usually occur during the spin cycle. Stop the spin cycle.
How do you reset the F5 code on a Whirlpool washer?
When using hot water in a Whirlpool washer, you may encounter the “F5” error code on the appliance. To finish the laundry load, reset the washer, wash in cold water and then fix the error to use hot water again.
How do I fix error F5 E3?
The F5 E3 alert indicates there is issue with the lid lock. Do not force the lid open, as permanent damage could occur. Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid.
How do I fix E2 error?
You can resolve the error by canceling the print job, and then changing the print settings in the printing software. Frist, Press the Cancel button to cancel the print job or clear the error.
Can we run AC with E2 error?
“E2” – Low Pressure: The pressure of the compressor is too low. The ‘Error’ LED will be on. Solution: Clean filters & coils. … Check evaporator/condenser coils.
How do I fix E2 error on my thermostat?
An E2 error is shown when no contact is detected between the motor and the valve pin. To resolve this, please make sure that the mounting bracket and the adapter (if used) are attached properly to the radiator. Restart and remount the Smart Radiator Thermostat to restart calibration.
How do I fix E3 error on my washing machine?
0C, 0E, E3 code appears on the washer screen. In this case, you need to drain water and remove the laundry. Then, run the rinse mode to clean the drum. Next, start the technique to make sure that the OC error has disappeared.
What does E3 mean on a dishwasher?
Error message E3 in integrated compact dishwasher indicates too much inlet water and/or a leak. We recommend requesting a visit by a service engineer. Warning: Turn off the dishwasher’s water supply to avoid flooding.
What does FS mean on washer?
The F indicates that the washer control detected a component problem. Since the door remained locked, your likely problem was with the drain pump or excessive suds preventing the washer from draining out the water properly.
How do I fix the LF on my washing machine?
When “LF” is displayed, there could be an issue with the water flowing into the machine. Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve.
What does E01 and F09 mean on a washing machine?
Accepted Answer. Whirlpool Duet Washer Error Code E01 F09 means LONG DRAIN TIME. When your Whirlpool washer goes into drain mode and the drain time is past 8 minutes and not reaching the reset level in the pressure sensor then the valves in the drain are turned off and the drain pump will cease to pump out the water.
