The IE error code on the LG washers display is indicating water did not fill the tub or it did not fill properly in the allotted time. This can be from a faulty water inlet valve, drain hose issue, bent water hoses, the water valves to the washer are not “open”, or there may be a communication or wiring harness issue.
similarly, What does IE mean on a LG dishwasher?
Water does not fill the appliance properly. Turn off the appliance. Check the following for the IE error: Check the water pressure.
on the other hand, Why does my Samsung washer keep saying UE?
When an UE error message is displayed on Samsung Washing Machine, it is indicating that the laundry load is unbalanced and has stopped the spin for safety reasons. … Redistribute washing by adding or removing items to ensure a more balanced load.
also, What does UE mean?
Acronym | Definition |
---|---|
UE | Upper Extremity |
UE | Unethical |
UE | United Electrical, Radio and Machine Workers of America |
UE | User Error |
How do I fix the UE on my washing machine?
How to Fix the LG Washer UE Error Code
- Make Sure the Load is Balanced. …
- Run a Rinse and Spin Cycle. …
- Check That the Washer Is Level. …
- Adjust the Legs to Level the Washer. …
- Check the Leveling Legs. …
- Check the Rotor Mounting Nut. …
- Check the Suspension Rods or Shock Absorbers. …
- Check the Hall Sensor.
What does F mean on LG dishwasher?
“F” code. When the unit is displaying “F”, the sensor is measuring the amount of soil. After 5 minutes sensing(except draining and filling), the unit will display the processing time.
How do I drain my LG dishwasher?
The LG dishwasher has a CANCEL & DRAIN option.
…
How to force water drain in the LG dishwasher
- Start a dishwashing cycle.
- Let the dishwasher run for 45 seconds.
- Turn off the device.
- Then turn it on. The first 45 seconds of any cycle is drain only.
What does CL mean on LG dishwasher?
The child lock feature has been activated by this code. The washer’s door and the power button are the only buttons that will not change when activated. The dishwasher door has a child lock on it. The power button should be pressed.
What do you do if your Samsung washer won’t drain?
Samsung washing machine does not drain
- Turn off the washer and check the level. If the washer isn’t level it may not drain correctly. …
- Inspect the drain hose. …
- Clean the pump filter (front loaders only). …
- Turn the washer back on and start a cycle.
Why does my washer keep going off balance?
Laundry caught below the tub or between the agitator and the inner tub can cause the washer to operate off balance with every load. The problem can be anything: a penny that worked its way out of a pocket, a button that fell off a shirt or a wayward sock or other article of clothing.
What does UE stand for on phone?
In the Universal Mobile Telecommunications System (UMTS) and 3GPP Long Term Evolution (LTE), user equipment (UE) is any device used directly by an end-user to communicate. It can be a hand-held telephone, a laptop computer equipped with a mobile broadband adapter, or any other device.
What does UE stand for in text?
Unemployment. UE. Urban Exploration. UE. Unknown Enemy (gaming)
What does UE stand for in media?
“Universe Estimate”, a Nielsen Media Research term. Urban exploration. Unemployment. German Type UE submarine (disambiguation)
What does unbalanced mean on a washing machine?
An unbalanced load is when your Washing Machine cannot spread out the clothing properly. The drum will tilt during the spin cycle and the Washing Machine will attempt to redistribute the load automatically by self correcting. The spin may stop completely and you will see a “Ub” error code.
How do I reset the code on my LG dishwasher?
Once the water is soaked up or enough time has passed for the water to evaporate, turn off the circuit breaker and turn it back on to reset the dishwasher. Then run an empty cycle with nothing in it to clean out the dishwasher. If the error code occurs again, service will be required.
How do I reset the CL code on my LG dishwasher?
This can usually be corrected by performing the following steps:
- Press the POWER button to turn the dishwasher off.
- Turn the circuit breaker to the dishwasher OFF and wait 10 seconds.
- Turn the circuit breaker to the dishwasher back ON.
- Press the POWER button to turn the dishwasher ON, and start a new cycle.
How do I fix the code on my LG dishwasher?
-Turn off the LG Dishwasher for 30 to 45 minutes to let the motor cool down as it may have overheated. -After 30 to 45 minutes start a new wash cycle and check if the LE error code shows again. -If not, resume normal washing.
How do I manually drain my LG washer?
If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water. Another way you can drain the water is by turning off your washing machine and unplugging it from the outlet.
How do I know if my dishwasher drain pump is bad?
If your dishwasher has a timer, turn the timer dial to the drain portion of the cycle to run the drain pump. Listen for the drain pump running. If the drain pump runs but doesn’t pump water and the drain path is clear, then the drain pump is likely bad.
Is there supposed to be water in the bottom of the dishwasher?
You’re likely noticing this water as you’re going to remove your dishwasher filters for regular cleaning. Water in this area is actually perfectly normal, useful even. It’s there to keep the seals from drying up. It drains when a cycle starts and is replaced with fresh water at the end of the cycle.
Where is the CL button on LG washer?
CL is not an error code, but an indicator that the child lock feature is active. When the child lock feature is active, the control panel is disabled, and settings cannot be adjusted. To activate or de-activate child lock, press and hold the child lock button for 3 seconds.
How do I reset the CL code on my LG washer?
To TURN OFF CHILD LOCK on your LG washer, press and hold the CHILD LOCK button for 3 to 5 seconds. The washer should now have CHILD LOCK mode DISABLED and all buttons will function properly.
How do I fix the CL on my LG dishwasher?
It simply means you (or someone in the household) has activated the child local feature on the dishwasher. You can release this feature by: Pressing down the wash and rinse buttons simultaneously. Hold both for at least five seconds.
Don’t forget to share the post !