An IE error code indicates that the washer was unable to fill with water. During cold and freezing weather conditions, an IE error code could mean the water in the water supply lines are frozen.
similarly, How do I troubleshoot my LG washer?
How to Troubleshoot LG Washer Problems
- Adjust your clothes. …
- Check the drum and drain filter for foreign objects. …
- Adjust the leveling feet at the base of your LG washer. …
- Check your hoses. …
- Check the power. …
- Contact LG customer support, if none of the previous steps help.
on the other hand, Why does my LG washer keep filling with water?
If the washer continues to fill with water even when it is not getting power, this indicates that the water inlet valve is defective. If the water inlet valve is defective, replace it. … If the pressure switch fails, the water inlet valve will continue to fill the washer tub with water, causing the washer to overflow.
also, How do I force drain my LG washer? If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.
Why is my LG washer not agitating?
#1 If the washer won’t agitate the drive block might be worn out or broken. The drive block connects the washer transmission to the agitator, if it’s worn out the transmission shaft will still move back and forth but the agitator will either stay still or move slightly.
Are there any recalls on LG washers?
Incidents/Injuries: LG has received at least 343 reports of washing machines vibrating excessively, of which at least 187 involved minor property damage. … Consumers who have observed their recalled washing machine shaking excessively should immediately stop using it.
Do washing machines have a reset button?
Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. … Some machines have a button you push to reset its motor. On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it.
Why is my washer filling up and draining at the same time?
If your washer continues to fill during a drain cycle, the water inlet valve could be at fault. … If the washer continues to fill, then the inlet valve is defective. If the washer stops filling, then the problem is related to the electrical circuit that controls the valve.
How do I know if my inlet valve is bad?
Signs that point to an inlet valve problem include leaks that fill the dishwasher when not running, the dishwasher filling too slowly when in use, or the dishwasher not filling at all. Leaks that end up outside of the dishwasher also can indicate an inlet valve problem, and this must be addressed immediately.
Why is my washing machine filling up and draining at the same time?
If your washer is draining the water at the same time it is filling with water, please check the following: Make sure that the house drain pipe is at least 30 inches high. If so, check to make sure the drain hose is not pushed too far down into the drain. … There must be an air gap around the drain hose.
Why is my LG washer not draining completely?
Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.
How do I test my LG washing machine drain pump?
Test the drain pump.
- Press POWER to turn the washer ON.
- Press the SPIN SPEED key until HIGH is selected.
- Press the START/PAUSE button to start the SPIN ONLY cycle.
- Listen to hear a humming sound which indicates that the drain pump motor has started working.
How do I manually drain my LG dishwasher?
How to force water drain in the LG dishwasher
- Start a dishwashing cycle.
- Let the dishwasher run for 45 seconds.
- Turn off the device.
- Then turn it on. The first 45 seconds of any cycle is drain only.
Why won’t my washer agitate or spin?
The washer transmission might be worn out or defective. Transmissions have gears in them that can fail causing the washer to not spin or agitate. … If the motor is turning the transmission, but the washer won’t spin or agitate, consider replacing the transmission.
How long do LG washing machines last?
The average life expectancy for washers and dryers is between 10 and 15 years. Front loaders are very efficient.
Are LG washers hard to repair?
LG front-loaders are less repair-prone than Frigidaire and GE but then the LG repair service left something to be desired. Of course, the most important thing to consider is performance. … So if you buy an LG washer and it breaks, consider calling your local repair shop first.
Does LG make good washers?
Based on our extensive evaluation, LG is one of the most reliable brands of washers, as it currently holds the number-one spot in both product and service quality in the American Customer Satisfaction Index rankings.
Do GE washing machines have a reset button?
Some machines have a button you push to reset its motor. … To reset washing machines that use the GE Hydrowave system, start by unplugging the washer for one minute. Plug the washing machine back in and then within 30 seconds, quickly open and close the lid six times. You’ll need to do this within a 12-second period.
How do I know if my washing machine control board is bad?
A failed front-load washing machine control board has several symptoms, including the washer not starting, filling, spinning or draining.
What are common problems with washing machines?
7 Common problems with washing machine
- Washing machine not starting. …
- Washing machine is noisy. …
- Excessive vibrations during operation. …
- Washing machine making noise when draining or not draining at all. …
- Washing machine over-filling or under-filling. …
- Washing machine not spinning. …
- Water leaking from soap drawer.
How do I know if my washing machine drain pump is bad?
Put your finger into the drain outlet and feel the impellers if the pump freely turns. One or more of them may be broken. If so, you’ll be able to feel them while you’re turning the pump flywheel with your other hand. You also may see broken pieces of plastic in the bottom of the pump housing.
How do I stop my washing machine from draining?
What to Do When Your Washing Machine Won’t Drain
- Perform a Master Reset. Unplug your washer for about one minute. …
- Test the Lid Switch Assembly. …
- See if the Drain Hose is Kinked. …
- Check the Drain Hose or Pump for Clogs. …
- Clean out the Coin Trap. …
- Check the Water Level Control. …
- Schedule Washing Machine Repair.
How do I stop my washing machine from draining water?
Start by unplugging the machine and emptying the water. Bail the water out of the tub, or you can drain the tub using gravity by placing the washer drain hose on the floor near the drain or in a bucket. Clamp the hose to prevent any remaining water from running out.
Don’t forget to share the post !