The CL message means that the child lock feature is currently engaged. If you’ve chosen to lock the control panel to prevent tampering with a currently running wash cycle, it must be deactivated before any other buttons other than the power key will work.
similarly, How do I turn off child lock?
- You can activate the CHILD LOCK function by pressing the STOP button for more than 5 seconds. The key symbol will light up in the front panel display.
- To cancel, press the STOP button for more than 5 seconds so that the key symbol disappears from the front panel display.
on the other hand, How do I remove Cl from my Samsung washing machine?
This indicates that a Child Lock error has occurred
power off and then on, the washing machine will operate normally. To clear “CL” display, after draining is complete, close the door of the washing machine, turn the power off and then on.
also, What does CL mean on Samsung? The Child Lock function on the Samsung washer locks all the buttons on the machine, other than the power button, so that the wash cycle selected can’t be changed. In addition at the end of the wash cycle, if the Child lock is activated it automatically powers off the machine.
What does the code DC mean on my Samsung washer?
By Lyle Weischwill. A dc error code on your Samsung front-load washer means the washer won’t spin because the load is unbalanced. Fixing a dc error code can be as easy as redistributing an unbalanced load or adding a few garments to a small or single-item load.
Why is my LG dishwasher flashing CL?
The CL code in the LG dishwasher is not an error at all. This code indicates that a user has activated child protection mode. … LG dishwashers are equipped with a door opening protection system during operation, and a button protection system (mode changing). Basically, the blocking mode completely locks all buttons.
What means CL?
Centilitre (cL), a metric measure of volume. Chlorine (Cl), a chemical element. Confidence level. Lift coefficient (CL)
Why is my Samsung washer always unbalanced?
The drum is overloaded or underloaded. If you wash your laundry at a temperature of more than 60 degrees, some extra water enters the washer during the rinse cycle. This may lead to a slight imbalance. … If the bearings are worn or rusty or the shaft is bent, the vibration increases and the washer may not spin at all.
Is there a reset button on my Samsung washer?
To reset your Samsung washing machine you need to simply disconnect the washing machine from power for 5 to 10 minutes. … Once the 5 to 10 minutes has passed, connect power to your Samsung washer and run a test wash load to see if the error code has cleared.
How do I turn off CL on my LG Direct Drive dishwasher?
Press the UP ARROW or DOWN ARROW repeatedly until CHILD LOCK appears in the front panel display. Press either the +(Enter) or the RIGHT ARROW button. Press the UP ARROW or DOWN ARROW to select a setting. OFF: the CHILD LOCK function is off.
What does the code CL mean on my Maytag washer?
Does the washer need to be cleaned? The CL code is a reminder to run the Clean Washer cycle and will appear after 30 cycles. The code will automatically clear once a Clean Washer cycle has completed or after three cycles.
What is mean by CL in registration?
People call it as EC in Hyderabad. This is in regards to that certificate, which shows to whom the property belonged earlier and now to whom does it belong. This property is a Gifted Property. The terms Executant (EX) and Claimants (CL) are used when it is a Sale Deed.
What does CL mean in job?
CL means Casual Leave – These are the leave which employee can anytime during their service years and it is not carried forward.
What is CL as a measurement?
A centilitre (cL or cl) a metric unit of volume that is equal to one hundredth of a litre and is equal to a little more than six tenths (0.6102) of acubic inch, or one third (0.338) of a fluid ounce.
How do I rebalance my Samsung washer?
- 1 Tap Settings on your washing machines display.
- Tap Calibration.
- Tap Start. The washing machine door will lock and the drum will rotate clockwise and anticlockwise for several minutes. When your washing machine has finished calibrating, it will turn off automatically.
How do I fix an unbalanced washing machine?
If your washer is located on a pedestal, the problem can be amplified. Top-loading washers automatically adjust to level. If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it.
How do you troubleshoot a Samsung washing machine?
Troubleshooting
- Unplug the machine. …
- Disconnect the hoses.
- Remove the detergent drawer by pressing the central locking button.
- Open the hatch of the drain filter at the bottom of the front panel.
- Empty the water and clean the filter.
- Put the washer on a side so that you can access the bottom.
How do I troubleshoot my Samsung washer?
Troubleshooting
- Unplug the machine. …
- Disconnect the hoses.
- Remove the detergent drawer by pressing the central locking button.
- Open the hatch of the drain filter at the bottom of the front panel.
- Empty the water and clean the filter.
- Put the washer on a side so that you can access the bottom.
Where is the reset button on my Samsung dishwasher?
Unlike their other appliances, Samsung dishwashers tend not to have a reset button or functionally.
…
How to Fix a Samsung Dishwasher That Won’t Turn On
- The power button does not respond when you touch it. …
- The circuit breaker has a tripped circuit. …
- The switch near the dishwasher is off.
How do I reset my Samsung washer to factory settings?
How to reset Samsung washing machine program – eco bubble models
- Step 1: Turn on the washing machine. You clearly simply need to press the power button to make it turn on.
- Step 2: Press the option button. …
- Step 3: Turn the dial to factory reset. …
- Step 4: Tap to reset.
How do you reset the code on a Maytag washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
What does F5 and E3 mean on a washing machine?
The F5 E3 alert indicates there is issue with the lid lock. … Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.
How do I get a link document for my property?
if there are no transactions, then you need to go for a link forensic (a professionalised service) where certified copies of all your link deeds will be obtained by taking photographs of links as recorded manually in Sub registrar office. In link forensics, we can get documents as old as year 1908.
What is Mr and me in registration?
ME – Mortgagee [Financier] MR – Mortgagor [Present Owner or Borrower]
What does CL stand for water?
The chloride ion /ˈklɔːraɪd/ is the anion (negatively charged ion) Cl−. It is formed when the element chlorine (a halogen) gains an electron or when a compound such as hydrogen chloride is dissolved in water or other polar solvents. Chloride salts such as sodium chloride are often very soluble in water.
Don’t forget to share the post !