If your Samsung washer has the LC Error code on its control panel, it means that there is a leak or your device is self-draining the water from the tank.
Table of Contents
READ ALSO
Likewise, What does LC mean in Samsung washing machine?
Samsung Washing Machine Error Codes 1E, LE, 1C, LC, LC1, 1 1C, 1 LC – Water level sensor failure or water hose connected to the sensor being detached from the drum because of vibration or water hose clogged with some gunk and sensor unable to measure how much water left in the drum.
Also, What does an LC LE error indicate?
Leakage error
LC, LE – The dishwasher’s leak sensor detects moisture or the water reflector is blocked (Waterwall models only). When this code occurs, the dishwasher will turn itself on and will not turn off.
Moreover, What does LC error mean?
What does lC error code mean? It indicates a malfunction of the pressure switch. The function of this element is to inform the electronics that the tank is full enough, and it is time to proceed to the next action. But in case of damage, the signal does not reach the control board or comes with distortion.
What are the symbols on my Samsung washing machine?
An icon displays on Samsung washing machine
- Garment + The t-shirt with a + icon indicates you can pause the cycle to add more clothing. …
- Child Lock. The smiley face icon indicates Child Lock is turned on. …
- Delay Start. …
- Door Lock. …
- Time Remaining. …
- Signal Off. …
- Pure Cycle or Self Clean. …
- Extra Rinse.
How do you clear the Le code on a Samsung dishwasher?
What does LE error code mean and how to remove it? It is a leak error. When it appears on the scoreboard, protection is activated and the equipment stops working. Try rebooting: close the shut-off valve, unplug the machine for 5 – 10 minutes, and then restart it.
Why is my dishwasher flashing lights?
Other blinking lights or beeping sounds: These may indicate a problem with the dishwasher caused by power surges. Try pressing the “Start/Reset” pad to reset the dishwasher and wait 2 minutes.
Why does my Samsung dishwasher keep blinking?
This means there is too much water in the dishwasher. This is often related to a drain issue. Inspect the dishwasher’s drain connection at the sink. Check the drain hose.
WHAT IS A PBA on a dishwasher?
Heater, Main power board assembly (PBA).
Why is the normal light flashing on my Samsung dishwasher?
A blinking Normal light indicates the dishwasher’s leak sensor detects moisture or there’s not enough water in the machine.
What are the symbols on washing machine?
Symbols on Washing Machine Detergent Drawers
- I= pre wash.
- II= main wash.
- Flower symbol= fabric softener.
What setting to wash towels on Samsung?
Normal: The default cycle. It’s best for items such as cottons, bed linens, table linens, underwear, towels, or shirts. The washing time and the number of rinses are automatically adjusted according to the load.
Is there a recall on Samsung dishwashers?
The dishwasher recall includes various models that have been manufactured by BSH Home Appliances over a span of seven years, from January 2008 to January 2017. They were available in stainless steel, black, white, or with a custom panel. … Last year, Samsung had to recall washing machines due to an issue with exploding.
What does Le on a dishwasher mean?
The LE error code on the LG dishwasher display is an indication of a MOTOR ERROR. The 5 issues that may cause this fault code is a wiring problem (most common reason for LE error), the impeller of washing pump is locked, the rotor of washing motor is locked, the blade is locked, or the PCB main control board is faulty.
What is the PBA on a Samsung dishwasher?
Heater, Main power board assembly (PBA).
Why are 2 lights flashing on my dishwasher?
Blinking “Start/Reset” light: Indicates that the dishwasher has been reset and is in the process of turning off. Other blinking lights or beeping sounds: May indicate a problem with the dishwasher caused by power surges. Try pressing the “Start/Reset” pad to reset the dishwasher and wait 2 minutes.
How do I fix a blinking light in my dishwasher?
This problem often manifests as the Option and All Cycle lights blinking and usually signifies that the door opened in the middle of a cycle. The solution can be as simple as firmly closing the door until it latches. The lights should stop flashing, and the cycle should automatically resume shortly after.
Can you reset your dishwasher?
Can you reset your dishwasher? Yes, you can reset your dishwasher by pressing the Start/Reset button on the appliance and waiting a few minutes. If your dishwasher still doesn’t start, you may need to reboot the entire system by turning off power to the appliance at the house circuit breaker or fuse box.
How do you program a Samsung dishwasher?
Press POWER to turn the dishwasher on, select a cycle first, and then select your options. If you change cycles, the options are reset. Press START, and then close the door within 3 seconds.
What does it mean when smart auto and heavy lights flashing?
Smart auto – heavy lights- This is a Over Level water error that is either caused by a bad PCB (You Replaced) Flow meter, or water supply valve. Samsung classifies this as a Case Sensor part breakdown. If you are getting heavy blinking by itself that is a leakage error.
Why will my Samsung dishwasher not start?
Your dishwasher will not begin a wash cycle if the door latch isn’t engaged. For the dishwasher to start, make sure the door is fully closed and the latch is enabled. A broken door latch can also be responsible for a Samsung dishwasher not starting. … When this happens the latch must be replaced.
Why is my dishwasher lights flashing?
A flashing “Washing” light on your dishwasher could be a sign of something amiss with the volume or temperature of the water. It could also be an indication of too much foam or suds in the washtub. Your washer will not run as long as the light is flashing. Start by resetting your machine’s control panel.
Why is the normal light blinking on my dishwasher?
When a light blinks on a dishwasher control panel, the keypad may be stuck. … Open and shut the dishwasher door and try to reprogram the dishwasher. If the “Normal” light continues to blink, the keypad console or the electronic control board may need to be replaced.
