P identifies your tire as a Passenger Tire. The P stands for PMetric. … For example, this aspect ratio of 50 means that the tire’s section height is 50% of the tire’s section width. R indicates the construction used within the tires casing. R stands for radial construction.
Likewise, What are R rated tires?
R speed rating
Speed rating R allows for speeds up to 106 mph (170 km/h) under optimal conditions. Like Q speed rated tires, R rated tires generally prioritize a particular function or unique performance over maximum speed capability.
Also, Can I use 235 tires instead of 225?
Are 225 and 235 Tires Interchangeable? Yes, they are. However, this is only possible if your car’s rims can accept the larger millimeter.
Moreover, Are P and LT tires interchangeable?
P-metric to LT is acceptable, but never replace original equipment LT tires with P-metric tires due to them having lower load capacity ratings at maximum air pressure. If you drive your truck heavily loaded or pull heavy trailer loads frequently, you should consider replacing your p-metric tire with an LT tire.
Does the P matter in tire size?
Physically, they have about the same dimensions and appear to fit interchangeably, but you will notice a difference in the two- or three-digit number following the size called the load index. The higher the load index, the greater the load-carrying capacity of the tire.
Can I mix V and W rated tyres?
You can invalidate your car insurance by fitting new tyres that have a lower speed rating than the manufacturer’s original fit. … Mixing tyre speed ratings isn’t recommended.
What does 70 mean on a tire?
If a tire has an aspect ratio of 70, it means the tire’s height is 70% of its width. Lower aspect ratio tires, such as a 60 series, generally offer vehicle handling performance advantages over higher aspect ratio tires, such as a 75 series, but a typical trade off can be ride harshness. Construction.
Can I use 235 55r17 instead of 225 65r17?
Yes. For safety reasons be sure that the replacement tires are rated for both load and speed at or above the specifications for your Vehicle. Be sure to replace the tires in pairs on either the front or rear axles. Failure to do so could cause problems.
Can I use 225 55r17 instead of 225 65r17?
The difference in the dimension of the two tyres is purely in the aspect ratio of the sidewall so the /65 tyres will have a bigger sidewall (note that the number is 65% of the width, not 65 somethings – i.e. 165.75mm vs 140.25mm and that’s effectively doubled because you’re taking radius, not diameter) and therefore …
Do bigger tires give a smoother ride?
While larger-diameter wheels and tires should improve handling and high-speed performance, lower-profile tires also tend to have a firmer ride and may be noisier than the smaller, standard rubber. … Bigger wheels cost more money. The bigger you go, the more expensive the wheels and tires.
What does LT and P mean on a tire?
Truck Tire Types – Passenger vs Light Truck
There are two designations for truck, CUV, and SUV tires: Passenger (P) and Light Truck (LT). Passenger tires are designed for use on lighter weight vehicles such as regular passenger cars, minivans and CUVs.
What is difference between P and LT tires?
An LT tire is built more robustly than a P-Metric tire to handle heavy loads under adverse conditions. Heavier body plies and larger bead bundles allow LT tires to be inflated to higher pressures, thereby increasing the tire’s load capacity. It is the air inside the tire that carries the load.
Does it matter if you have different tires on your car?
Primarily, you should avoid mixing different tire brands and different tread patterns. There are rare exceptions for approved mixed-tire fittings, but in general, manufacturers do not recommend tire mixing at all.
Is P225 the same as 225?
Tire width always refers to the measurement from one sidewall to another. Thus, a tire with the measurement “P225” is for a passenger vehicle and has a nominal width of 225 millimeters.
What does the P in front of my tire size mean?
If there is a “P” on the sidewall, it stands for “passenger car.” This refers to the U.S. (P-metric) method of tire sizing. “LT” stands for Light Truck, “ST” is for Special Trailer and “T” stands for Temporary, which is primarily used for small spare tires.
What does XL mean on a tire?
This means there needs to be different types of tyres, as the tyres used for a large vehicle, an SUV or a fully loaded transporter have to take more weight than those of a normal car. XL tyres have been especially developed for use with heavy loads. Generally speaking, the tyre name XL is used for heavy duty tyres.
What is the difference between speed rating V and W?
For tires with a maximum speed capability higher than 240 km/h (149 mph), a “ZR” may appear in the size designation. Tires with a maximum speed capability higher than 300 km/h (186 mph), require a “ZR” in the size designation.
…
Tire Speed Rating Chart.
SPEED SYMBOLS | ||
---|---|---|
V | 240 | 149 |
W | 270 | 168 |
Y | 300 | 186 |
What is the difference between Y and W speed rating?
Speed ratings are achieved through tests performed by engineers who run the tyre at 6.2 mph steps, in 10 minute increments, until the required speed has been met. … Confusingly, W-rated tyres are rated at a higher speed in excess of 168mph. Y-rated tyres are rated in excess of 186mph.
Is a higher load rating better?
The higher the number, the higher the load it can safely handle. As an example, a tire with a load index of 89 can safely handle 1,279 pounds — while a tire with a load rating of 100 can safely handle as much as 1,764 pounds.
Which is a wider tire 65 or 70?
According to the Generic Auto Tire FAQs in Type2’s Technical Library, the shorter sidewall of the series 65 tire means a slightly wider tire that changes the car’s handling considerably; specifically, “more rubber on the road provides a better grip.” The series 65 provides better turn-in and stability compared to the …
Can I use 75 tires instead of 70?
I think the 75 series tire is roughly 1″ taller than the 70 series…. so 1/2″ more sidewall… not a lot of difference. The 75 definately “looks” better and might even get ya better mileage as you’re not turning as fast….
Can I use 265 tires instead of 255?
It’s important to note that the outer diameter (how far the wheel rolls in one revolution) is slightly more for a 265 than a 255 at the same aspect ratio as the sidewall would be larger. 10mm bigger in width. The tread section width of the 265 tire is 10mm wider than the 255 tire.
Will 235 65R17 fit 225 60R17?
Not safely, no. If you go to a narrower tread width tire you will want to increase the sidewall height aspect ratio exponentially. The shorter sidewall 225/60R17 tire will not provide the needed load carrying capability needed for your vehicle.
Can you put different size tires on rims?
Wheels and tires are not interchangeable words. … For instance, your vehicle has a set size of rims, but you can buy different sizes of tires to fit those rims, as long as the middle of the tires is the correct size. That being said, a vehicle with bigger rims will often be able to fit larger tires than other vehicles.
What does it mean 225 65R17?
On this page you’ll find a color-coded explanation of the 225-65R17 tire code. … This number means that your tire has an aspect ratio of 65%. In other words, your tire’s sidewall height (from the edge of the rim to the tire’s tread) is 65% of the width. In this case, the sidewall height works out to be 146 millimeters.