By Lyle Weischwill. A dc error code on your Samsung front-load washer means the washer won’t spin because the load is unbalanced. Fixing a dc error code can be as easy as redistributing an unbalanced load or adding a few garments to a small or single-item load.
similarly, What does OC mean on my Samsung washing machine?
Samsung washing machine OC error means overfill of the drum with water. Water level sensor sends the signal indicating that there is too much water in the drum – more than the amount of water required for the selected program. The appliance stops washing, it activates the drain pump and sends error ОС on the display.
on the other hand, How do I clear the DC code on my Samsung washer?
Resetting your washing machine is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.
also, How do I fix DC error on my Samsung washer? A DC code error on a Samsung washing machine indicates that the washer is unable to spin due to a load imbalance. Correcting a DC error is as simple as redistributing the weight of an existing load, removing items to reduce the overall weight in the washer, or changing suspension rods (or shock absorbers).
How do I get my Samsung washer to spin only?
To run a Spin Only cycle on a model that does not have this option on the cycle selector dial, perform the following:
- Power the unit on.
- Press and hold the spin key for approximately 3 seconds. A chime will sound.
- Select the spin level, if desired.
- Press the Start/Pause button.
What does 3C mean on Samsung washer?
More videos on YouTube
| Code | Cause |
|---|---|
| 3C, 3E, 3E1, 3E2, 3E3, 3E4 | Motor issue |
| 4C, 4E | Water supply issue |
| 4C2, 4E1, 4E2, 4Ed | Water temperature issue |
| 5C, 5E | Water drainage issue |
Why does my Samsung washing machine take so long?
A washer that continuously takes too long to wash may have a malfunctioning load sense system, or greater problems with its control panel. There may also be issues with your water inlet valve, which pulls water into the appliance for each cycle. … Also, heating the water often takes longer in a front-loader.
Where is the reset button on my Samsung dishwasher?
Unlike their other appliances, Samsung dishwashers tend not to have a reset button or functionally.
…
How to Fix a Samsung Dishwasher That Won’t Turn On
- The power button does not respond when you touch it. …
- The circuit breaker has a tripped circuit. …
- The switch near the dishwasher is off.
Is there a reset button on my Samsung washer?
To reset your Samsung washing machine you need to simply disconnect the washing machine from power for 5 to 10 minutes. … Once the 5 to 10 minutes has passed, connect power to your Samsung washer and run a test wash load to see if the error code has cleared.
Why does my Samsung Washer keep adding time?
Water Inlet Valve Problem
As you’ve seen above, the water inlet valve is important to each washing cycle. If it is not letting in enough water to complete a cycle, it can cause the machine to keep increasing the time. Check the valve as recommended above, to rule out any problems with it.
Why is my Samsung Washer always unbalanced?
Some Samsung top loading washing machine models that are experiencing a UE or DC error code or the washing machine is unbalanced during the spin cycle should upgrade the suspension damper rod assemblies to a new improved design.
Can you just do a spin cycle on Samsung washer?
Note: Some models can select a Spin Only cycle by pressing and holding the Spin button for about 3 seconds until a cycle time displays. You can then toggle the desired spin setting and start the cycle as normal.
Why does my Samsung washing machine not spin?
If your Samsung washing machine does not spin fully or at all during the rinsing or spinning phase of the cycle it is most likely to be caused by an unbalanced load. … 1 Open the door and redistribute the washing more evenly around the drum. 2 Check that the drum is not over or under loaded.
How do I reset my Samsung washing machine?
Reset your washing machine
Resetting your washing machine is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.
How do I fix the code on my Samsung washer DC?
A DC code error on a Samsung washing machine indicates that the washer is unable to spin due to a load imbalance. Correcting a DC error is as simple as redistributing the weight of an existing load, removing items to reduce the overall weight in the washer, or changing suspension rods (or shock absorbers).
Why does my Samsung washing machine take 2 hours?
A washer that continuously takes too long to wash may have a malfunctioning load sense system, or greater problems with its control panel. There may also be issues with your water inlet valve, which pulls water into the appliance for each cycle.
How long is a quick wash on a Samsung washer?
Quick Wash is a 15 minute quick timed wash program in Samsung front loader washing machines. Also, you can freely select the cycles between 15 to 60 minutes for perfect fast washing with no aggressive action.
How long does it take to wash clothes in a Samsung washing machine?
A normal wash cycle usually takes between 50 minutes to an hour to complete. However, this time could be faster or slower depending on load size and the cycles or options you choose.
Why will my Samsung dishwasher not start?
Your dishwasher will not begin a wash cycle if the door latch isn’t engaged. For the dishwasher to start, make sure the door is fully closed and the latch is enabled. A broken door latch can also be responsible for a Samsung dishwasher not starting. … When this happens the latch must be replaced.
Why is my Samsung dishwasher not getting water?
Common solutions for: Samsung Dishwasher won’t fill
If the water valve is clogged or defective, water will not flow into the dishwasher. … If the float switch is defective or stuck, it might not stop the dishwasher from overflowing. If the float switch is defective, replace it.
How do you troubleshoot a Samsung washing machine?
Troubleshooting
- Unplug the machine. …
- Disconnect the hoses.
- Remove the detergent drawer by pressing the central locking button.
- Open the hatch of the drain filter at the bottom of the front panel.
- Empty the water and clean the filter.
- Put the washer on a side so that you can access the bottom.
Why won’t my Samsung washer fill with water?
First, check the water pressure to determine that it is adequate. If the water pressure is adequate, try cleaning the screens inside the water inlet valve hose connection ports. If the washer still fills slowly, replace the water inlet valve. … Check the water pressure to the valve to determine if it is sufficient.
How do you balance Samsung washer?
- 1 Tap Settings on your washing machines display.
- Tap Calibration.
- Tap Start. The washing machine door will lock and the drum will rotate clockwise and anticlockwise for several minutes. When your washing machine has finished calibrating, it will turn off automatically.
What does the code 4C mean on a Samsung washing machine?
The 4E (4C) error code indicates that the washing machine has detected a problem with the water supply. The most common reason for this error is a blocked or kinked water supply hose.
Don’t forget to share the post !