The F21 error code indicates a long drain. Here are some tips that should help you resolve this problem: Check your washer drain to make sure that it is draining properly. Check the drain hose for kinks and clogs.
Table of Contents
READ ALSO
Likewise, How do I fix my F21 Bosch washing machine?
To reset the F21 error on a Bosch machine, turn the program knob from the off position (12 o’clock) to the 6 o’clock position and immediately press and hold the spin button. Then while holding the spin button turn the knob to 7 o’clock position and continue holding the spin button for 15 seconds.
Also, How do you clear F21 code on Kenmore washer?
This may be an indication of a drain pump problem and/or clog in the drain line. Unplug your machine for 1/2 hour to see if the CCU will reset. If that is without result check the drain hose for kinks or if it is clogged. After that check the electrical connections to the pump and ensure the pump is running.
Moreover, How long does Sud error last?
If you have noticed a SUD code during a washing cycle, it means the suds have exceeded the drum’s usual level. More specifically, this error means that the washing machine is reducing foaming. It has just stopped for 5-10 minutes to allow the suds to dissipate and the washing cycle to go on.
How do I clear the error code on my Kenmore washer?
You will need to remove the power supply to the washer to reset the code.
- Look for the “Pause/Cancel” button on the washer control panel. …
- Press the “Pause/Cancel” button twice to cancel the wash cycle. …
- Connect the water supply hoses back to the washer and turn on the water spigots.
How do I get rid of F21 on my washing machine?
Here is what to do when your Whirlpool washer shows F21 error code: 1 – Check the drain hose located at the back of the washer to be sure it is not clogged, bent, or blocked in any way. Remove the drain hose and check to be sure there is no large lint blockage that is preventing the washer from expelling the water.
What is the best make of washing machine to buy UK?
Best overall – Bosch serie 4 WAN28050GB: £369, Currys.co.uk. Best integrated washing machine – Indesit BIWMIL71252: £309.99, Very.co.uk. Best budget washing machine – Bush WMNB712EW: £199.99, Argos.co.uk. Best for stain removal – Hotpoint BIWMHG81484UK: £390, Ao.com.
What does ND mean on Kenmore washing machine?
No Drain Condition (Nd)
If your washer is beeping, and the display is flashing “Nd”, your machine is showing a no drain condition which is usually related to a backed up drain hose or a clogged debris filter.
What does F33 mean on a Kenmore washer?
The F33 fault code indicates that the wiring connection between the pump and CCU (central control unit or main control board) is lost. This can be caused by a loose wire harness connection at the pump or the CCU. It could also be caused by a bad pump motor.
How do you remove the bottom panel on a Kenmore washer?
How to Remove Panels on a Kenmore Laundry Center
- Unplug the Kenmore laundry center power cord from the wall outlet. …
- Pull the bottom of the front panel out slightly and pull down to disengage the top clips. …
- Remove the screws under the front corners of the washer top with a nut driver.
Why does my washer keep saying Sud?
It means you are using detergent improperly. If your washing machine has the word “SUDS” on the display, it has detected an over-sudsing condition, and will stop for a short period to allow the suds to dissipate. This error code is usually caused by too much detergent, or the wrong type of detergent.
What do you do when your washing machine says Sud?
Your washing machine might appear frozen or broken when you see the “SUD” error. However, your washer is just pausing to allow the soap bubbles to break down (like the bubble foam in a bubble bath goes flat over time). Then it will run a rinse cycle to break up and rinse away the remaining detergent.
How do I get rid of suds in my washing machine?
If you see suds, a quick and simple way to eliminate them is to throw a capful of liquid fabric softener into the wash and run an additional rinse cycle. Vinegar will work as well.
Why does my washer keep saying UE?
The uE/UE code indicates that the washer is attempting to balance the load, which may be the result of the unit not being leveled correctly or the load itself. This code can be easily resolved without the need of a technician.
What does F5 mean on my washing machine?
The F5 error code indicates that the Central Control Unit (main machine control board) detects a temperature sensor resistance that is out of the normal range.
How do I reset my washing machine?
To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.
What does F21 mean on a Maytag 3000 washer?
In this particular case, error code F21 indicates an issue with your Maytag washing machine’s drain valve. When it takes eight or more minutes for a Maytag washing machine to drain, the device will tell its pipes to close, and you’ll be forced to troubleshoot.
What are the worst washing machines to buy?
The worst washing machines on the market today all leave a lot to be desired.
…
These are brought to you via Amazon reviews and a few YouTube videos.
- Whirlpool WTW5000DW. …
- Maytag MVWB835DW Bravos XL 5.3 Cu. …
- Samsung White Top Load Washer. …
- Samsung 4.5 Cu. …
- LG WT7200CW 5.0 Cu.
Is it worth paying more for a washing machine?
When buying a white goods appliance you might expect that if you pay more you will get a better quality appliance. So the question is, if you pay an extra £50, or even £100’s more for a more expensive model (from the same brand), will you get a more reliable washing machine? The answer is No.
What is the best washing machine for 2020?
Best Washing machines
- Bosch Serie 4 WAN28201GB review: A great all-round package.
- AEG 9000 Series L9FEC966R review. 929.
- Bosch Serie 6 review: A great value washing machine. 629.
- Bosch Serie 8 WAWH8660GB review: A great all-rounder. 799.
How do you unclog a washing machine drain pipe?
To unclog a clogged drain, first fill a bucket with boiling water and a pack of baking soda. Remove the drain pipe from your washing machine and slowly pour the water into the drain using a funnel. Wait a few minutes and test if it keeps draining if you pour water into it.
What do you do when your front load washer won’t drain?
Clogged Drain Hose
Over time, debris can clog the drain hose and prevent your washer from draining. A twisted or coiled drain hose can also inhibit the free flow of water. Check behind the washer and straighten a kinked hose. If this does not solve the problem, unplug and clean the hose to eliminate any residue.
How do I fix error code F33?
This is most commonly caused by a failed drain pump. Check the drain pump trap and make sure it is clean and that nothing is binding the pump impeller. Check the wiring at the drain pump make sure the connection is seated properly. If all that looks and the error continues replace the drain pump.
What does F33 code mean?
Code F33. 1 is the diagnosis code used for Major Depressive Disorder (MDD), Recurrent, Moderate. It is a mental disorder characterized by a pervasive and persistent low mood that is accompanied by low self-esteem and by a loss of interest or pleasure in normally enjoyable activities.
What does F33 mean on a Whirlpool washer?
Whirlpool , Washers. 1 Answer from this member: The F33 codes indicates that the central control and drain pump have lost contact with each other. The problem will be with the drain pump, central control or a loose wire connector.
