@gwenr Error F21 is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a “SUDS” error may also be displayed. This may be an indication of a drain pump problem and/or clog in the drain line.
Table of Contents
READ ALSO
similarly, What is F21 code on Kenmore washer?
The F21 error code indicates a long drain. Here are some tips that should help you resolve this problem: Check your washer drain to make sure that it is draining properly. Check the drain hose for kinks and clogs.
on the other hand, How do you fix F21 codes?
Clogged drain into the sewer
Lint, scraps of paper, small coins, socks – anything can block the drain at the junction of the hose and the sewer hole. The solution is to disconnect the pipe and clean the drain from foreign debris that prevents water from escaping, causing the F21 error code.
also, Why does my washer keep saying F21? If you see error code F21 on your Whirlpool washing machine, this refers to a water drain problem. The washer won’t be able to finish the cycle and your laundry will be wet. This error code means draining is taking too long, and something is wrong with the water pumping.
How do I fix error code F21 on Maytag?
What is an F21 or F02 Error Code on my Maytag Front Load Washer? These error codes indicate that drain times are longer than expected .
…
Removing the Error
- Unplug the washer or disconnect the power for one minute.
- Plug in the washer or reconnect the power.
- Re-select the cycle and press Start.
How do you reset error F21?
Reset. When the “F21” error code appears, try pressing “Pause/Cancel” to stop the current wash cycle. If water remains in the washing machine tub, touch “Drain/Spin” to force a secondary drain cycle to remove the water. Once all the water drains, try selecting a new wash cycle and pushing “Start.”
Why does my washer keep saying F?
The F indicates that the washer control detected a component problem. … If the F code was caused by excessive suds preventing the washer from draining, you may be able to shut the door and run a drain/spin cycle to remove the water from the washer.
How do I fix error code F21 on Maytag?
Problem with the overflow contact.
- Disconnect power to the washer.
- Turn off both hot and cold water faucets.
- Make sure the drain hose is free from kinks and obstructions.
- Clean the drain pump filter.
- Plugin the washer.
- Try to restart the machine.
How do I fix my Maytag F21 code?
Problem with the overflow contact.
- Disconnect power to the washer.
- Turn off both hot and cold water faucets.
- Make sure the drain hose is free from kinks and obstructions.
- Clean the drain pump filter.
- Plugin the washer.
- Try to restart the machine.
How do I fix my F21 Bosch washing machine?
To reset the F21 error on a Bosch machine, turn the program knob from the off position (12 o’clock) to the 6 o’clock position and immediately press and hold the spin button. Then while holding the spin button turn the knob to 7 o’clock position and continue holding the spin button for 15 seconds.
How do I reset my Maytag front load washer?
How to Reset a Maytag Washer
- Press the “Power/Cancel” button.
- Push the appropriate button to choose a new cycle.
- Press “Start/Pause.” You have now reset your Maytag washer.
How do I clear the error code on my Maytag washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
How do you reset the error code on a Maytag washer?
How do you clear the codes on a Maytag Bravos washer?
- Unplug the washer for 1 minute from the electrical outlet.
- Plug the washer back in and lift and lower the lid 6 times within a 12 second period. …
- The motor has now been reset and is ready for you to start a cycle.
How do I clear the error code on my Whirlpool washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
How do I reset my Whirlpool front load washer?
The first way you can reset whirlpool washer top load is by unplugging it for about 2 minutes then plug it back in and wait about 30 seconds before starting the washer again. This performs a hard reset on the machine and it will start over after you reconnect it again.
How do you fix a Whirlpool washer that won’t drain?
What to Do When Your Washing Machine Won’t Drain
- Perform a Master Reset. Unplug your washer for about one minute. …
- Test the Lid Switch Assembly. …
- See if the Drain Hose is Kinked. …
- Check the Drain Hose or Pump for Clogs. …
- Clean out the Coin Trap. …
- Check the Water Level Control. …
- Schedule Washing Machine Repair.
What does F code mean?
FCODE
| Acronym | Definition |
|---|---|
| FCODE | Forth Code (electrical engineering) |
How dO I clear the error code on my Whirlpool washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
What does it mean when a washer says F1?
When the Whirlpool Cabrio displays an F1 error, this means the the control board is having difficulty communicating with the motor. To fix your F1 error, you can first try to unplug your washing machine for 15 minutes and then plug it back in.
How do I clear the error code on my Maytag front load washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
What is the best make of washing machine to buy UK?
Best overall – Bosch serie 4 WAN28050GB: £369, Currys.co.uk. Best integrated washing machine – Indesit BIWMIL71252: £309.99, Very.co.uk. Best budget washing machine – Bush WMNB712EW: £199.99, Argos.co.uk. Best for stain removal – Hotpoint BIWMHG81484UK: £390, Ao.com.
What is F21 error on Bosch washing machine?
The cause for the F21 error can be a foreign object. It often gets the tank during washing and hinders the drum. Another reason for F21 error code is a voltage drop in the mains.
How do you reset Bosch washing machine?
How to reset an error code on a washing machine by Bosch, Neff, or Siemens. Press and hold down on the spin button and simultaneously turn the dial to the 7 o’clock position. Hold the spin button for around 5 seconds and then release.
Don’t forget to share the post !
