1 1/2″ drains are the standard size drain for lavatory sinks in North America. The name, 1 1/2″ Drain, does not refer to the specific size of the hole in the sink or diameter of the drain, but is used as a standard term. Glass vessel sinks use a 1 3/4″ drain and are generally used as head sinks.
similarly, Are all bathroom sink plugs the same size?
Standard size sink plugs are 1 3/4 inch for kitchen sinks and baths and 1 1/2 inch for bathroom sinks. … Sink plugs are still available in 1 inch, 1 1/4 inch, 1 3/8 inch, 1 5/8 inch, 1 7/8 inch, 2 inch, 2 1/4 inch, 2 3/8 inch and 2 1/2 inch. You can often use a standard plug in your basket strainer waste.
on the other hand, Can you put a 90 in a sink drain?
It’s fine to have a larger-radius (sweep) 90-degree bend at the base of a vertical drainage stack where the wastewater starts to travel horizontally. It’s also a good idea to have a sweep 90-degree fitting where a drain pipe pops out of a wall for a kitchen, vanity or laundry sink.
also, What size is the drain and trap for a bathroom sink? Traps come in 1 1/4 inch (standard bathroom sink) or 1 1/2 inch (standard kitchen sink) inside diameter sizes.
What type of pipe is used for a sink drain?
PVC Pipes
PVC is a plumbing pipe known for its versatility, lightweight, and blockage resistance. PVC piping is generally used as part of a sink, toilet, or shower drain line, though it’s sometimes used as a home’s main water supply pipe.
Are all kitchen sink drains the same size?
Kitchen Sink Drain Sizes All kitchen sinks today have the same diameter drain, which is 3 1/2 inches and is larger than a bathroom drain which measures in at 1 1/4 inches. It is the same size as a typical standard shower drain, however. … Pipe Size.
What is a sink basket?
The basket is the removable part that plugs the drain when you want to fill the sink with water and the strainer catches large chunks of food to prevent clogs. The Flange of the basket strainer goes on the inside of the sink and the rubber washer/gasket, paper gasket, pressure cup and nut are under the sink.
Do I need a sink strainer?
Whether you have a single or double basin sink, the standard drain hole diameter is 3-½”. When not connecting to a garbage disposal, you will need a drain with a strainer flange and basket. The basket is used to trap food waste and prevent clogs within the drain pipe while allowing water to pass through.
Can a sink drain go straight down?
In a sense, all drains go through the floor. You cannot have a code-approved sink drain going down, unless you have a vent going up.
Can a p-trap be higher than the drain pipe?
It is not ideal to have the p-trap below the the exit drain because water gravity has to force the water out instead of it flowing downwards naturally. They both work and have seen it many times. But essentially anything below already creates its own p-trap- so using another is redundant.
How far under a sink can the p-trap be installed?
According to the International Residential Code, the maximum vertical distance between the sink drain and the entrance to the p-trap is 24 inches.
Are there different size sink drains?
Most drain openings are 1 1/4 inches, although 1 1/2 inches and 1 5/8 inches are also common sizes.
How do I enlarge a hole in a porcelain sink?
You can use one of two methods to make the hole wider in a porcelain sink. You can use a grinder to wear down the porcelain, or you can use a diamond grit hole saw to cut a new hole. The hole saw is definitely faster, but it’s a little riskier because it generates more heat.
What is the most common size of the drain piping on a kitchen sink?
Pipe Size. Some older sinks may have drains that connect to a 1 1/4-inch tailpiece, but most modern drains have a 1 1/2-inch outlet. All the pipes that connect to the tailpiece, including the P-trap assembly and all the horizontal extensions, are either 1 1/4 or 1 1/2 inches in diameter.
What is a sink drain tailpiece?
The tailpiece, or sink tailpiece, is the straight section of pipe that connects to the bottom of the sink drain fitting. … Typically, the tailpiece attaches to the drain fitting with a slip nut—a threaded ring that can be tightened and loosened by hand (or with gentle persuasion from channel-type pliers).
Can I use PVC for sink drain?
However, PVC is not suitable for incoming water flow — its use is limited to toilet and drain piping due to the plastic’s lack of heat tolerance.
Are kitchen and bathroom pipes connected?
Your kitchen sink and bathtub have separate drain lines, but they ultimately all connect to a single line that leads into the sewer. If your sink is draining into your bathtub, something has definitely gone wrong somewhere in the plumbing lines.
When should you not use plumbers putty?
Do not use plumber’s putty where you need adhesive strength (to bond materials or prevent them from moving) or where you need a watertight seal in exposed areas.
What can you use instead of plumbers putty?
A clay-like substance called plumber’s putty is the most popular choice for sealing sink drains, but you can also use silicone caulk.
- Most Popular: Plumber’s Putty.
- Plumber’s Putty Installation.
- Alternative: Silicone Caulk.
- Silicone Caulk Installation.
How do I choose a sink strainer?
Choose a strainer suited to the thickness of the sink. Standard strainer assemblies designed for stainless steel sinks may not fit an enameled cast iron sink which is thicker. Read the product specifications and confirm the strainer will accommodate your sink’s thickness, which typically ranges from 1/8 to 3/8 inches.
Does a sink come with a drain?
Kitchen sinks almost always come with drains, while kitchen faucets usually do not. The only faucets that come with drains are bathroom sink faucets. … Kitchen sinks, on the other hand, can come both with and without drains depending upon the type of sink you get.
What can I use instead of p-trap?
Recently I discovered the amazing HepvO Waterless Valve. It’s a new solution to this old problem. Using a flexible silicon tube inside that seals out air but allows water to flow in one direction, it performs the same task without using any water and without being large and bulky like a p-trap.
Can kitchen sink drain go through floor?
Trap Type. Sink drains that exit through the wall behind the sink require a P-trap, and sink drains that exit through the floor beneath the sink require an S-trap. … Plumbing pipes, fittings and connectors come in various sizes, but the standard sink drainpipe is 2 inches in diameter.
Why do you need a trap under your sink?
The p-trap under sink plumbing pipe serves the function of capturing a small amount of water inside your drainpipes after the sink is used. This plug prevents sewer gases from coming up the wastewater line and out the sink.
Don’t forget to share the post !