The coldest setting is “9” and the warmest setting is “1”. The “0” setting is OFF, which turns the cooling off. Turn knobs to lower numbers for warmer temperatures and to higher numbers for colder temperatures.
Table of Contents
READ ALSO
Likewise, Why is my fridge not cold enough?
Problem: Fridge Not Cooling
Be sure the fridge is plugged in and getting power. … Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan).
Also, What number should my Frigidaire fridge be set at?
For refrigerators with electronic controls (most Side-by-Side and French-Door refrigerators) – Fresh food compartment should be set for 37 degrees Fahrenheit and the freezer should be set for 0 degrees Fahrenheit.
Moreover, How do I fix the temperature on my refrigerator?
How to Fix Refrigerator Temperature Problems
- Unplug the refrigerator.
- Mark the wires so you know where they go into the switch.
- Take out the switch and tube.
- Go to an appliance parts store with the switch and tube and the model and serial number of the refrigerator and get a new part.
How do you fix a refrigerator that is not cold enough?
Depending on what’s causing your fridge not to keep perishable foods cold enough, the following procedures might help.
- Make sure your fridge is getting power.
- Check the refrigerator’s thermostat.
- Test the seals on your fridge doors.
- Determine whether the refrigerator is level.
- Clean the condenser coils.
How do I know if my fridge is cold enough?
To check the temperature of a refrigerator, it’s best to use food or liquid that has been in the compartment for at least 24 hours. The most common practice is to place a glass of water in the refrigerator (but not in the door) and let it sit for a day. Then place the thermometer in the glass to get a reading.
Why is my fridge not cold but freezer is working?
When the fridge is not cold but the freezer is, the problem is probably tied to one of your refrigerator’s mechanisms not working as designed. … A small fan and motor are mounted near the evaporator, helping draw air over the coils and circulate it to the fridge and freezer.
What setting should a fridge be on 1 5?
How to Change the Temperature in your Fridge Freezer
| Dial Display | Temperature Setting |
|---|---|
| 0 | Cooling system off |
| Minimum or 1 | Warmest setting |
| 2 or 3 | Recommended setting |
| Maximum or 5 | Coolest Setting |
Why is my fridge temp rising?
Dirty, dusty, or blocked compressor coils will cause your fridge’s temperature to fluctuate wildly. They need to stay clean to let the heat escape, or it just circulates back into the fridge. Cleaning compressor coils is easy: Unplug your fridge and move it away from the wall so you can get to the coils.
How can I cool my fridge fast?
To make your fridge cool down faster:
- Keep it a few inches from the wall.
- Put ice in the freezer.
- Don’t open the doors.
- Keep the kitchen cool.
- Cool food down before putting it in the fridge.
What is the first thing to check when a refrigerator stops working?
The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.
Why has my fridge gone warm?
Refrigerator Is Too Full
Your refrigerator stays at the proper temperature thanks to cold air that’s consistently circulated through the appliance. If there are too many items in your fresh food compartment, that cold air may not circulate properly, resulting in a refrigerator that’s warm.
What is the average life of a refrigerator?
The average lifespan of a refrigerator
According to a study from the National Association of Home Builders and Bank of America (NYSE: BAC), the typical standard fridge lasts 13 years. For compact refrigerators, often called mini fridges, the lifespan is slightly less at nine years.
Why is my side by side refrigerator not cooling?
If the refrigerator is not cold enough there might be something caught in the condenser fan motor blade, or the condenser fan motor might be defective. The condenser fan motor draws air over the condenser coils to cool them. The condenser fan motor is located underneath the refrigerator near the back.
How much does it cost to fix a refrigerator that is not cooling?
Some repairs that are generally worthwhile include cleaning a dirty coil, unclogging a drain line, or replacing a faulty thermostat. A fridge that won’t stay cold is usually suffering from a bad thermostat or a dirty coil. Both of these problems can be fixed in about an hour, and will cost about $50 to $250.
Is 5 degrees OK for a fridge?
The coldest part of the fridge should be between 0 degrees Celcius and 5 degrees Celcius (32 degrees Fahrenheit and 41 degrees Fahrenheit). You could use a probe thermometer to check if food is being kept hot (above 63 degrees Celcius) or cold (below 8 degrees Celcius).
What number should a Whirlpool fridge be set at?
However, a range of 33–40°F (0–4°C) is generally accepted as safe for most purposes. The typical factory setting for Whirlpool® refrigerators is the recommended 37°F (3°C), but temperatures on all refrigerators may need to be set higher or lower depending on your fridge’s environment and other factors.
Is 2 degrees too cold for a fridge?
The closer foods are to the coil (which is usually found on the lower shelf, as hot air rises), the colder those foods will be. Experts say the optimum overall temperature for a household fridge is between 0c and 4c.
What temperature is too warm for a refrigerator?
Before using any foods, check your refrigerator and freezer thermometers. If the fridge is still at or below 40 °F, or the food has been above 40 °F for only 2 hours or less, it should be safe to eat.
What to do if fridge is not cooling?
Depending on what’s causing your fridge not to keep perishable foods cold enough, the following procedures might help.
- Make sure your fridge is getting power.
- Check the refrigerator’s thermostat.
- Test the seals on your fridge doors.
- Determine whether the refrigerator is level.
- Clean the condenser coils.
Why would my refrigerator stop cooling and then start working again?
If the thermostat is adjusted incorrectly, the fridge will turn off and turn on again when the temperature increases. The compressors are responsible for providing power for the cooling process. In this case, it is suggested that you lower the thermostat setting to ensure the compressor keeps working properly.
How do I know if my fridge is working properly?
7 Major Warning Signs That Your Refrigerator Is Broken
- It’s Not Cold Enough. Are you not feeling a chill when you open your fridge? …
- Your Food is Spoiling Quickly. …
- There’s Condensation. …
- Ice Is Building Up in the Freezer. …
- The Motor is Hot. …
- It’s Loud. …
- There’s Water on Your Floor. …
- Signs Your Refrigerator is Broken.
How do I know if my thermostat is bad in my refrigerator?
Here are some signs that your fridge has a faulty thermostat and some troubleshooting tips to help you deal with them.
- The Refrigerator Is Not Cool Enough.
- Unusually Cold Refrigerator.
- Refrigerator Temperature Fluctuation.
- Sub-Zero Refrigerator Temperature Troubleshooting Tips.
- Contact Wilshire Refrigeration.
