What to do if your computer turns on but the screen is black?

Before you begin troubleshooting a blank monitor

1. Make sure the monitor has power and the power light comes on when the power button is pressed. …
2. If you have a flat panel LCD monitor, unplug the monitor power cable, wait about 30 seconds, reconnect the cable and then turn on the monitor.

Likewise, How do I fix HP black screen of death?

Do the following :

1. Turn off your HP laptop or desktop.
2. Detach or unplug any hard drive, battery or any peripheral device.
3. Long press the power button for at least a minute and then release.
4. Now attach the battery into your laptop and plug the charger.
5. Reboot your system to see if it fixes the issue.

Also, How do you fix a laptop that turns on but nothing?

Computer Turns On But no Display FAQ

1. Check the Power Supply, Laptop Charger and Battery.
2. Disconnect All External Devices, Unplug All USB Devices.
3. Inspect Your Asus/HP/Acer/Dell/Lenovo Laptop Monitor.
4. Start Windows in Safe Mode.
5. Startup Repair.
6. Perform a System Restore.
7. Rebuild MBR.
8. Fix Boot Errors.

Moreover, How do you fix a laptop that turns on but no display?

Use the following steps to remove and reseat the memory modules:

1. Turn off the computer, and then disconnect the power cord. …
2. Remove the cover to access the memory. …
3. Remove memory modules in the computer.
4. Reinsert all memory modules. …
5. Replace the cover, battery, and power cord.
6. Turn on the computer.

How do you master reset a laptop?

To hard reset your computer, you’ll need to physically turn it off by cutting the power source and then turn it back on by reconnecting the power source and rebooting the machine. On a desktop computer, switch off the power supply or unplug the unit itself, then restart the machine in the normal manner.

How do you force restart a laptop?

Hard Reboot

1. Press and hold the power button on the front of the computer for approximately 5 seconds. The computer will shut off. No lights should be near the power button. If lights are still on, you can unplug the power cord to the computer tower.
2. Wait 30 seconds.
3. Push the power button to turn the computer on again.

Why won’t my screen come on on my laptop?

To re-enable your laptop screen, try pressing Fn and F1/F2/F4/… (the function key that turns on/off your laptop screen) on your keyboard. You may consult the manual of your laptop to know the function key that enables/disables your laptop screen. Now check to see if you’re able to turn on your laptop screen.

Will a hard reset delete everything on my laptop?

A hard reset erases all user data and any apps installed by the user.

How do I factory reset my laptop without turning it on?

Another version of this is the following…

1. Power off the laptop.
2. Power on the laptop.
3. When screen turns black, hit F10 and ALT repeatedly until the computer shuts off.
4. To fix the computer you should choose the second option listed.
5. When the next screen loads, choose the option “Reset Device”.

Why won’t my computer turn on but has power?

Make sure any surge protector or power strip is correctly plugged into the outlet, and that the power switch is on. … Double-check that your PC’s power supply on/off switch is on. Confirm that the PC power cable is properly plugged into the power supply and outlet, as it can become loose over time.

How do I restart my laptop when the screen is black?

If the screen is still showing in black, press and hold the power button for about 10 seconds to shut down the device. Then press the power button again to restart. (If you had documents open, you might lose unsaved content using this action.)

What if your laptop doesn’t turn on?

If your laptop won’t power up, a faulty power supply, failed hardware, or a malfunctioning screen could be to blame [1]. In many cases, you may be able to resolve the problem yourself by ordering replacement parts or adjusting your laptop’s configuration.

How do I restart my laptop when the screen is black?

If your Windows 10 PC reboots to a black screen, just press Ctrl+Alt+Del on your keyboard. Windows 10’s normal Ctrl+Alt+Del screen will appear. Click the power button at the bottom-right corner of your screen and select “Restart” to restart your PC.

Why is my HP laptop stuck on startup screen?

Ensure the notebook is powered down. Remove the battery and AC power. Press and hold the power button for 15-20 seconds three times. Replace battery and AC power.

Is a hard reset the same as a factory reset?

2 Answers. The two terms factory and hard reset are associated with settings. A factory reset relates to the rebooting of the entire system, while hard resets relates to the resetting of any hardware in the system.

Is factory reset bad for your computer?

Factory resets aren’t perfect. They don’t delete everything on the computer. The data will still exist on the hard drive. Such is the nature of hard drives that this type of erasure doesn’t mean getting rid of the data written to them, it just means the data can no longer be accessed by your system.

How do you perform a hard reset?

While powered off, press and hold the Home key, while continuing to hold the home key power the device on by pressing the Power key. Once the Android Recovery screen appears release the Home key, then while on the Android Recovery screen, press the Volume Up and Volume Down keys both at the same time.

Is there a reset button on a laptop?

Where is the reset button on a laptop? To help conserve space, a laptop and most portable devices only have one power button. If you need to reset a laptop or another device, press and hold down the power button and after 10-15 seconds, the device resets or turn off.

How do I fix my HP computer that won’t boot up?

How Do I Fix a Laptop that Won’t Turn On?

1. Check the power supply and battery. If your HP laptop won’t turn on even when plugged in, start by checking the power supply. …
2. Diagnose screen issues. …
3. Remove all devices from your laptop. …
4. Use a rescue disc. …
5. Boot in safe mode. …
6. Check hardware.

How do you fix a computer that wont boot up?

What to Do When Your Computer Won’t Start

1. Give It More Power. (Photo: Zlata Ivleva) …
2. Check Your Monitor. (Photo: Zlata Ivleva) …
3. Listen for the Beep. (Photo: Michael Sexton) …
4. Unplug Unnecessary USB Devices. …
5. Reseat the Hardware Inside. …
6. Explore the BIOS. …
7. Scan for Viruses Using a Live CD. …
8. Boot Into Safe Mode.

What are the signs of a motherboard failure?

The computer may start to boot but then shuts down. Increased Windows errors or “blue screens of death” are symptoms of failing motherboards. The computer may freeze for seemingly no reason, or connected devices that worked before suddenly won’t work.

How do I fix my HP computer that won’t turn on?

How Do I Fix a Laptop that Won’t Turn On?

1. Check the power supply and battery. If your HP laptop won’t turn on even when plugged in, start by checking the power supply. …
2. Diagnose screen issues. …
3. Remove all devices from your laptop. …
4. Use a rescue disc. …
5. Boot in safe mode. …
6. Check hardware. …
7. Diagnose, repair, or replace.

How do I force start my HP laptop?

How Do I Force Restart my HP Laptop? If your HP laptop has locked up, frozen, or you can’t get it to restart using the above method, then you may need to force a restart. To do this, press down the Power button on your HP laptop and wait five to ten seconds. The computer will shut down and turn off entirely.

How do you fix a computer that won’t start up?

How to troubleshoot your Windows PC when it won’t turn on

1. Try a different power source.
2. Try a different power cable.
3. Let the battery charge.
4. Decrypt the beep codes.
5. Check your display.
6. Check your BIOS or UEFI settings.
7. Try Safe Mode.
8. Disconnect everything non-essential.

How do I turn on my HP laptop when it wont turn on?

Here’s how to do it:

1. Ensure your laptop is OFF.
2. If there is any external device connecting to your laptop, unplug all the external devices.
3. Disconnect the power charger from the computer, and remove the battery.
4. Press and hold the power button for about 30 seconds.
5. Connect the power supply (power adapter).