What would cause a Maytag washer to not spin?

Make Sure the Wash Load is Properly Sized and Balanced

Overloading the washer with too many items or a single item that’s too large can result in a Maytag washer not spinning clothes dry. If the washer drum is too heavy or unbalanced, with too much weight on one side of the drum, it can slow the spin speed.

similarly, Why does my Maytag washer keep going off balance?

Laundry caught below the tub or between the agitator and the inner tub can cause the washer to operate off balance with every load. The problem can be anything: a penny that worked its way out of a pocket, a button that fell off a shirt or a wayward sock or other article of clothing.

on the other hand, Why isn t my washing machine spinning?

An imbalanced drum is a common reason for your machine not spinning. The easiest way to avoid an imbalanced drum is by making sure you don’t overload your washing machine, or if you have one large piece of laundry, add smaller pieces to balance out the load. You may also need to check that your machine is level.

also, How do you fix a Maytag washer that won’t drain? If the washer won’t drain or is not draining properly, and the washer has a coin trap, remove the coin trap and clean it thoroughly. First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions.

What makes washing machine unbalanced?

If a suspension rod is broken, replace it. One or more of the suspension springs might be broken. The suspension springs help to absorb the movement of the washer tub. If a suspension spring breaks, the tub might become unbalanced, causing it to shake and vibrate during operation.

Why is my washing machine spinning out of control?

Washing machine is not level – A shaking/vibrating washer is most commonly caused by the washer not being level. If the washer is slightly tilted to one side, the washer can shake and move around when running the spin cycle. There may be missing or damaged leveling legs.

How do I know if my washing machine drain hose is clogged?

An easy way to check that the drain hose is clear is to blow air through it. If nothing is obstructing the drain tube, the problem is most likely at the washing machine pump. If the hose is worn or badly kinked, replacing the hose may improve the ability of the machine to pump water.

How do you unclog a Maytag washer?

1. Prepare the Machine. Pull Away from the Wall. With your supplies ready, it’s time to prep the washing machine. …
2. Clear the Water. Bail Out the Basket. If the washer is full of water that isn’t draining away, you’ll need to bail it out. …
3. Remove the Front Panel. Prop Up the Washer Front. …
4. Start the Clog Hunt. Check the Pump Housing.

What causes a washing machine to not drain completely?

There are a few possibilities why your washing machine won’t drain. … Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed.

Why is my washing machine shaking violently?

If the washing machine is not balanced, it may shake violently during the spin cycle, causing water to spill on the floor. Redistributing the load will usually solve this issue if the cause is due to too many clothes on one side of the unit. … Place a level on your washing machine.

How do I stop my washing machine moving when spinning?

How to Stop a Washing Machine From Walking (Moving When Spinning)

1. Make Sure There Are No Transit Bolts.
2. Balance Out the Basket by Washing Even Loads.
3. Use a Level to Even Out Your Washer.
4. Check and Adjust the Washer’s Feet.
5. Get an Anti-Slip Rubber Mat.
6. Anti-Vibration Rubber Feet Pads Are Small and Efficient.

Why is my washing machine so loud during spin cycle?

If you hear noises when the washing machine is in spin mode, it means that the tub bearing is worn out. When the drum spins, it rides on the bearing which allows it to move freely without any resistance. If the bearing is faulty, you will hear a loud noise when the drum rotates.

How do you unblock a washing machine drain?

To unclog a clogged drain, first fill a bucket with boiling water and a pack of baking soda. Remove the drain pipe from your washing machine and slowly pour the water into the drain using a funnel. Wait a few minutes and test if it keeps draining if you pour water into it.

How do you fix a clogged washing machine?

If you don’t feel prepared to manually take apart your laundry unit and use a drain snake to clear dense debris from your clogged washing machine drain, you can also try flushing out your drainage systems with non-caustic home cleaning mixtures, typically made of baking soda, vinegar, and hot water.

How do you clean a clogged washing machine drain hose?

Pour hot water down the drain.

If your washing machine is draining slowly but it is not completely clogged, you can try simply pouring very hot water down the drain to clear it out. This can release built up soap and scum that is narrowing your drainage pipe.

How do you fix a Whirlpool washer that won’t drain?

What to Do When Your Washing Machine Won’t Drain

1. Perform a Master Reset. Unplug your washer for about one minute. …
2. Test the Lid Switch Assembly. …
3. See if the Drain Hose is Kinked. …
4. Check the Drain Hose or Pump for Clogs. …
5. Clean out the Coin Trap. …
6. Check the Water Level Control. …
7. Schedule Washing Machine Repair.

How do I know if my washing machine pump is broken?

When the pump fails, you can hear or see the trouble: a loud rumbling inside the machine, or a failure of the water to drain out of the tub. Here’s what you can do to fix the problem: Step 1: Check the drain hoses to make sure they’re draining properly. Remove the water supply hoses from the back of the washer.

How do I reset my washing machine?

To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.

Why is my front load washer not draining completely?

Clogged Drain Hose

Over time, debris can clog the drain hose and prevent your washer from draining. A twisted or coiled drain hose can also inhibit the free flow of water. Check behind the washer and straighten a kinked hose. If this does not solve the problem, unplug and clean the hose to eliminate any residue.

How do you stop a washing machine from shaking?

6 Tips to Stop Washing Machine Vibration

1. Check that your loads are balanced. …
2. Check the the floor and machine are level. …
3. Ensure You Have a Sturdy Floor. …
4. Check Your Stacking Kit. …
5. Purchase Washing Machine Vibration Pads. …
6. Call in Some Reinforcement.

How much vibration is normal for a front load washer?

Important: The short pause and vibration when the washer spin cycle reaches approximately 400 RPM is a normal.

How do you test a washing machine shock absorber?

Shock Absorber

If you have been hearing a loud banging noise from your top-loading washing machine, and it is shaking and moving during the spin cycle, you’ll want to check on the shock absorbers, or struts. These go between the outer tub and the base frame to moderate the shaking of the tub during the spin cycle.

Why does my washing machine shake so violently?

Your washing machine needs to stand level and balanced on its feet to function properly. An unbalanced appliance will vibrate and shake during operation. Try rocking the appliance from side to side or back and forth. If it’s rocking a lot, your flooring or appliance’s feet may be uneven.

Don’t forget to share the post !