The ideal fridge temperature is between 37°F (3°C) and 40°F (5°C). Your freezer temperature should be at 0°F (-18°C). And it takes about 24 hours for your fridge to adjust to any changes you make.
Table of Contents
READ ALSO
Likewise, How do I run a diagnostic on my Whirlpool refrigerator?
Starting Diagnostics
To do this open the refrigerator door and press one or both door switches, depending on your refrigerator type. Next press the refrigerator temperature (+) button three times in ten seconds and release the light switch or switches.
Also, How do I know if my fridge is cold enough?
To check the temperature of a refrigerator, it’s best to use food or liquid that has been in the compartment for at least 24 hours. The most common practice is to place a glass of water in the refrigerator (but not in the door) and let it sit for a day. Then place the thermometer in the glass to get a reading.
Moreover, Which is colder on a fridge 1 or 7?
Usually, a mini fridge dial ranges from 1-7, 1 being the coldest setting, and 7 being the warmest.
Why is my fridge not cold enough?
Problem: Fridge Not Cooling
Be sure the fridge is plugged in and getting power. … Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan).
What causes a Whirlpool refrigerator to stop cooling?
Dirty condenser coils are the most common cause for a Whirlpool refrigerator not cooling. Condenser coils dissipate heat as the refrigerant passes through them. If the coils are clogged in dirt and debris, they can’t release the heat properly.
Does a Whirlpool refrigerator have a reset button?
Whirlpool refrigerator control panel reset is recommended if the refrigerator is beeping and not functioning properly. When the Whirlpool refrigerator reset button is not dealt with, it may cause more issues in the future.
What is the first thing to check when a refrigerator stops working?
The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.
Is 1 or 6 the coldest setting on a fridge?
Some fridges don’t show the temperature but work on a setting that is listed from 1 to 5. The numbers on the fridge’s temperature dial indicate the refrigerating power. Therefore, the higher the setting, the cooler the fridge will be. Choosing setting 5 will make your fridge the coldest.
Is 5 degrees OK for a fridge?
The coldest part of the fridge should be between 0 degrees Celcius and 5 degrees Celcius (32 degrees Fahrenheit and 41 degrees Fahrenheit). You could use a probe thermometer to check if food is being kept hot (above 63 degrees Celcius) or cold (below 8 degrees Celcius).
What to do if refrigerator is not cooling?
Depending on what’s causing your fridge not to keep perishable foods cold enough, the following procedures might help.
- Make sure your fridge is getting power.
- Check the refrigerator’s thermostat.
- Test the seals on your fridge doors.
- Determine whether the refrigerator is level.
- Clean the condenser coils.
Why would my refrigerator stop cooling and then start working again?
If the thermostat is adjusted incorrectly, the fridge will turn off and turn on again when the temperature increases. The compressors are responsible for providing power for the cooling process. In this case, it is suggested that you lower the thermostat setting to ensure the compressor keeps working properly.
What to check if refrigerator stops cooling?
Depending on what’s causing your fridge not to keep perishable foods cold enough, the following procedures might help.
- Make sure your fridge is getting power.
- Check the refrigerator’s thermostat.
- Test the seals on your fridge doors.
- Determine whether the refrigerator is level.
- Clean the condenser coils.
Why would a refrigerator stop cooling?
Problem: Fridge Not Cooling
Be sure the fridge is plugged in and getting power. … Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan).
How do you fix a Whirlpool refrigerator that is not cooling?
A Whirlpool refrigerator not cooling may have a dirty or damaged gasket that leaks cold air, warming the refrigerator’s interior. Inspect the door gasket for damage, using a cloth dipped in warm water to clean away any dirt and debris. If the gasket is ripped or broken it will need to be professionally replaced.
Why is my refrigerator running but not cooling?
Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out. … Plug in the fridge and make sure the fan runs when the compressor is running.
How do I reset the control panel on my Whirlpool refrigerator?
Reset power to the product:
- Power unit down by turning off the circuit breaker(s) or unpluging the product for 5 – 10 minutes.
- Power unit up by turning on the circuit breaker(s) or plugging the product back in.
- Ensure the cooling function is turned on.
- Test the control panel functionality.
What do I do if my Whirlpool refrigerator is not cooling?
Check the condenser coils to determine if they are dirty—if the condenser coils are dirty, clean them. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is not working properly, the refrigerator won’t cool properly.
Is there a reset button on a Whirlpool refrigerator?
Press the door switches and the refrigerator temperature button three times within 10 seconds. After releasing the switches, there should be a letter “S” display in the freezer section and an “E” in the refrigerator’s display.
Why is my refrigerator not kicking on?
Refrigerator: Not running. If the refrigerator has electrical power—the inside light turns on, but the compressor won’t run—possible causes include a control board failure, a wiring problem or a failed compressor. A bad compressor start relay will also prevent the compressor from running.
How can you tell if refrigerator compressor is not working?
The best way to tell if something has gone wrong with the compressor is to pull the fridge slightly out from the wall and listen closely. If the motor is running with a slight humming sound but the temperature is above what its normal range should be, then it’s likely there could be a problem with the compressor.
What happens when refrigerator condenser fan fails?
If your condenser fan stops, the temperature of the refrigerant will rise and the compressor may overheat. … The fan runs whenever the compressor runs, and it draws cool room air through the front grille, and circulates it through the condenser coils, over the compressor, and back out the front grille into the room.
What is the maximum temperature for a fridge?
Keep the refrigerator temperature at or below 40° F (4° C). The freezer temperature should be 0° F (-18° C). Check temperatures periodically. Appliance thermometers are the best way of knowing these temperatures and are generally inexpensive.
Is 6 degrees too warm for a fridge?
Experts say the optimum overall temperature for a household fridge is between 0c and 4c. … ‘Keeping your fridge below four degrees centigrade — but not below zero, the freezing temperature of water, which will turn the water in foods to ice — will ensure that it stays fresh for longer. ‘
What to do if fridge is not cooling?
Depending on what’s causing your fridge not to keep perishable foods cold enough, the following procedures might help.
- Make sure your fridge is getting power.
- Check the refrigerator’s thermostat.
- Test the seals on your fridge doors.
- Determine whether the refrigerator is level.
- Clean the condenser coils.
